N. Kumar, S. Ghosh, and D. Basu,"Thermalhydraulic assessment and performance prediction of supercritical minichannel heat sink with airfoil-shaped obstructions using GA-tuned neural network", Applied Thermal Engineering, vol.227, no.120352, pp.120352 (1-15), Elsevier 2023, 10.1016/j.applthermaleng.2023.120352       Article

K. Samal and S. Ghosh,"Categorization of liquid-liquid counter-current two-phase flow-structures in 11 mm ID tube at different conduit-orientations", International Journal of Multiphase Flow, vol.150, pp.1-28, Elsevier, May 2022, 10.1016/j.ijmultiphaseflow.2022.104010       Article

M. Rout, J. R. Senapati, and S. Ghosh,"The effect of Reynolds number on mass suction and outlet temperature in IRS device", in In Proceedings of the 9th International and 49th National Conference on Fluid Mechanics and Fluid Power (FMFP), December 14-16, 2022, IIT Roorkee, FMFP 2022       Inproceedings

P. Bhuyan and S. Ghosh,"Influence of rotor speed, discharge pressure, and clearance size on the unsteady flow dynamics and heat interaction of roots blower", Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol.43, no.1, pp.48(1-25), Springer, January 2021, 10.1007/s40430-020-02729-0       Article

K. S. Manoj, A. Subramanian, S. Ghosh, and S. K. Sarangi,"Thermal performance of a single stage double inlet pulse tube refrigerator: experimental investigation and CFD simulation", Experimental Heat Transfer, pp.1-16, Taylor & Francis, January 2021, 10.1080/08916152.2021.1873875       Article

K. Samal and S. Ghosh,"Kerosene-water counter-current two-phase flow-structures varying flow-orientation in 15 mm diameter duct", Flow Measurement and Instrumentation, vol.81, no.102016, pp.1-18, Elsevier, October 2021, 10.1016/j.flowmeasinst.2021.102016       Article

S. P. Sahoo, S. Datta, T. Roy, and S. Ghosh,"Machining performance of Ti6Al4V under dry environment, pressurized air supply and water-MQL: analysis of machining-induced vibration signals and captured thermographs", Sadhana, vol.46, no.4, pp.2-22, Springer 2021, 10.1007/s12046-021-01738-6       Article

S. P. Sahoo, S. Datta, T. Roy, and S. Ghosh,"Machining Performance of Ti6Al4V under Dry Environment, Pressurized Air Supply and Water-MQL: Analysis on Machining- Induced Vibration Signals and Captured Thermographs", Sadhana, an Official Journal of the Indian Academy of Sciences, Springer, October 2021, 10.1007/s12046-021-01738-6       Article

S. P. Sahoo, S. Datta, T. Roy, and S. Ghosh,"Machining Performance of Ti6Al4V under Dry Environment, Pressurized Air Supply and Water-MQL: Analysis on Machining- Induced Vibration Signals and Captured Thermographs", Sadhana, an Official Journal of the Indian Academy of Sciences, Springer, October 2021, 10.1007/s12046-021-01738-6       Article

S. Ghosh, A. K. Dubey, and A. K. Das,"Numerical Inspection of Heterogeneity in Materials using 2D Heat-Conduction and Hybrid GA-tuned Neural-Network", Applied Artificial Intelligence, vol.34, no.2, pp.125-154, Taylor & Francis 2020, 10.1080/08839514.2019.1691843       Article