R. N. Behera and C. Patra,"Ultimate bearing capacity prediction of eccentrically inclined loaded strip footings", Geotechnical and Geological Engineering, pp.1-52, Springer 2018, 10.1007/s10706-018-0521-z       Article

R. N. Behera, C. Patra, B. Das, and N. Sivakugan,"Ultimate bearing capacity of shallow strip foundation under eccentrically inclined load—a critical assessment", International Journal of Geotechnical Engineering, Taylor & Francis 2018, 10.1080/19386362.2018.1549693       Article

R. N. Behera, A. Kumar, and C. Patra,"Geotechnical and geoenviornmental characterization of TTPS pond ash and its utilization", in Indian Geotechnical Conference 2017 GeoNEst, pp.96, IIT Guwahati 2017       Inproceedings

V. Alla, S. K. Sasmal, R. N. Behera, and C. Patra,"Development of Alternate Liner Material by Blending Fly Ash, Local Soil and Bentonite", in Indian Geotechnical Conference 2017 GeoNEst, pp.95, IIT Gawahati, IIT Guwahati, India, December 2017       Inproceedings

R. Sahu, C. Patra, N. Sivakugan, and B.,"Use of ANN and neuro fuzzy model to predict bearing capacity", International Journal of Geosynthetics and Ground Engineering, pp.1-15, Springer, September 2017, 10.1007/s40891-017-0102-x       Article

K. S, M. H, C. Patra, F. K, S. N, and Das. B. M,"Prediction of compaction parameters of coarse grained soil using multivariate adaptive regression splines (MARS)", International Journal of Geotechnical Engineering, vol.9, no.1, pp.79-88, Taylor & Francis, September 2015, 10.1179/1939787914Y.0000000061       Article

S. Khuntia, H. Mujtaba, C. Patra, K. Farooq, N. Sivakugan, and B. Das,"Prediction of compaction parameters of coarse grained soil using multivariate adaptive regression splines (MARS)", International Journal of Geotechnical Engineering, vol.9, no.1, pp.79-88, Taylor & Francis 2015, 10.1179/1939787914Y.0000000061       Article

S. N, Das. B. M, L. J, and C. Patra,"Determination of c and f of rocks from indirect tensile strength and uniaxial compression tests", International Journal of Geotechnical Engineering, vol.8, no.1, pp.59-65, Taylor & Francis, August 2014, 10.1179/1938636213Z.00000000053       Article