Article
Conference
Inbook
Ebook
Book
Manual
A. K. Yadav and S. Bhattacharyya, "A new approach for the fabrication of porous alumina beads using acid leachate of kaolin", Microporous and Mesoporous Materials, vol.293, Elsevier 2020, 10.1016/j.micromeso.2019.109795 >> Details
S. P. Dash, K. R. Subhashini, and J. K. Satapathy, "Optimal location and parametric settings of FACTS devices based on JAYA blended moth flame optimization for transmission loss minimization in power systems", Microsystem Technologies, Springer, December 2019, 10.1007/s00542-019-04692. >> Details
P. S. Behera and S. Bhattacharyya, "Studies on the low-temperature synthesis of fine? -Al2O3 powder by precipitation route", Glass Physics and Chemistry, vol.46, no.4, pp.312-320, Springer 2020, 10.1134/S1087659620040033 >> Details
A. K. Parida and K. Maity, "FEM and experimental analysis of thermal assisted machining of titanium base alloys", Measurement, Elsevier, February 2020, https://doi.org/10.1016/j.measurement.2019.107292 >> Details
K. S. Kumar, A. K. Yadav, and S. Bhattacharyya, "Studies on the Densification and Strengthening of Porous Mullite Ceramic in the Presence of Titania Additive", Interceram, vol.68, no.6, pp.42-48 2019 >> Details
S., M. Tripathy, and G. Hota, "In-situ functionalization of GO sheets with AlOOH-FeOOH composite nanorods: An eco-friendly nanoadsorbent for removal of toxic arsenate ions from water", Journal of Environmental Chemical Engineering, vol.7, Elsevier 2019, 10.1016/j.jece.2019.103357 >> Details
M. Bhaumik and K. Maity, "Finite lement simulation and experimental investigation of Ti-5Al-2.5Sn titanium alloy during EDM process", Materials Today: Proceeding, Elsevier, February 2020, https://doi.org/10.1016/j.matpr.2020.05.135 >> Details
J. P. Dhal, T. Dash, and G. Hota, "Iron oxide impregnated mesoporous MCM-41: synthesis, characterization and adsorption studies", Journal of Porous Materials, vol.27, pp.205-216, Springer 2020, https://doi.org/10.1007/s10934-019-00803-0 >> Details
P. Tripathy and K. Maity, "Experimental Investigation of effect of cryo-treatment on micro milling of Inconel 718", Surface Review and Letters, World Scientific Publishing, May 2020, 10.1142/S0218625X20500018 >> Details
S. K. Sahoo, S. Padhiari, S., B., and G. Hota, "Fe3O4 nanoparticles functionalized GO/g-C3N4 nanocomposite: An efficient magnetic nanoadsorbent for adsorptive removal of organic pollutants", Materials Chemistry and Physics, vol.244, no.122710, Elsevier, April 2020, 10.1016/j.matchemphys.2020.122710 >> Details