All Publications

S. Biswas and J. Anurag,"Fabrication of composite laminates", Reinforced Polymer Composites: Processing, Characterization and Post Life Cycle Assessment, ch.3, pp.39-53, Wiley 2020       Inbook

S. Biswas,"Tribological performance and application of biocomposites", Processing and Natural Fibre Reinforced Bio-composites, ch.7, pp.212, Woodhead 2020       Inbook

T. Khuntia and S. Biswas,"Characterization of a Novel Natural Filler from Sirisha Bark", Journal of Natural Fibers, Taylor & Francis 2020, 10.1080/15440478.2020.1838997       Article

S. R. D and S. Biswas,"Processing and mechanical characterization of short banana- jute hybrid fiber-reinforced polyester composites", Processing and Characterization of Multicomponent Polymer Systems, ch.5, pp.350, CRC Press, April 2019       Inbook

J. Anurag and S. Biswas,"Thermo-Mechanical analysis of unidirectional PALF composites using micromechanical approach", in 1st International Conference on Applied Mechanical Engineering Research (IC-AMER2019) at NIT Warangal, India, National Institute of Technology Warangal, May 2019       Inproceedings

P. K. Patnaik, P. R. Swain, A. Purohit, and S. Biswas,"Tribological study on slurry abrasive wear behaviour of non-woven viscose fabric composites with doe approach", Surface Review and Letters, World Scientific, December 2019, 10.1142/S0218625X19501853       Article

P. K. Patnaik, P. R. Swain, and S. Biswas,"Investigation of mechanical and abrasive wear behavior of blast furnace slag-filled needle-punched nonwoven viscose fabric epoxy hybrid composites", Polymer Composites, vol.40, no.6, pp.2335-2345, Wiley, November 2018, 10.1002/pc.25090       Article

P. R. Swain and S. Biswas,"Effect of Moisture Absorption on the Mechanical Properties of Ceramic Filled Jute/Epoxy Hybrid Composites" 2017, 10.1088/1757-899X/178/1/012010       Proceedings

S. Biswas,"Primary manufacturing of thermosetting polymer matrix momposites", Primary and Secondary Manufacturing of Polymer Matrix Composites, ch.1, pp.1-16, CRC Press, September 2017       Inbook

J. Anurag, S. Biswas, and S. R. Devireddy,"Finite element analysis of mechanical and thermal properties of polymer matrix composites", Primary and Secondary Manufacturing of Polymer Matrix Composites, ch.7, pp.121-141, CRC Press, September 2017       Inbook