All Publications

C. S. Saran and A. Satapathy,"Epoxy-hemp and epoxy-flax composites filled with glass dust for enhanced thermal insulation: an analytical and experimental study", Polymer Composites, vol.45, no.6, pp.5244-5255, Wiley, January 2024, 10.1002/pc.28123       Article

N. Pandey, S. K. Nayak, A. Satapathy, S. Mantry, and S. Sahoo,"Deposition and characterization of high velocity oxy-fuel sprayed nickel chrome boron silicium based coatings on stainless steel substrates", Materials Science and Engineering Technology, vol.55, no.2, pp.153-164, Wiley, February 2024, 10.1002/mawe.202300199       Article

S. K. Bhoi and A. Satapathy,"Sliding wear characteristics of epoxy composites reinforced with steel wire and flax fiber mats: An experimental and analytical study", Polymer Composites, vol.45, no.18, pp.17222-17238, Wiley, October 2024, https://doi.org/10.1002/pc.28964       Article

S. K. Bhoi and A. Satapathy,"An experimental and analytical approach to study the sliding wear performance of epoxy composites with steel wire and glass fiber reinforcement.", Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.239, no.3, pp.349-362, Sage, September 2024, https://doi.org/10.1177/13506501241286612       Article

C. S. Saran and A. Satapathy,"Effects of waste glass dust incorporation on the tribological performance of flax-epoxy hybrid composites.", Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engine, Sage, October 2024, https://doi.org/10.1177/09544089241305253       Article

P. R. Pati, A. Agrawal, A. Purohit, G. Gupta, S. K. Nayak, and A. Satapathy,"Utilization of industrial waste as filler material in the development of polymer composites", COMPOSITES, ch.5, pp.66-85, CRC Press, August 2024, https://doi.org/10.1201/9781003564355       Inbook

S. K. Mahapatra and A. Satapathy,"Parametric appraisal and wear prediction of hybrid composites using an integrated soft computing approach", POLYMER COMPOSITES, vol.45, no.11, pp.10155-10171, Wiley, August 2024, https://doi.org/10.1002/pc.28464       Article

S. Mourya, S. K. Mahapatra, and A. Satapathy,"Processing and characterization of waste dolomite dust filled hemp-epoxy composites", Materialwissenschaft und Werkstofftechnik (Materials Science and Engineering Technology), vol.55, no.10, pp.1406-1417, Wiley, October 2024, https://doi.org/10.1002/mawe.202300314       Article

C. S. Saran and A. Satapathy,"Fabrication and property evaluation of waste glass dust filled epoxy-hemp and epoxy-flax hybrid composites", Materialwissenschaft und Werkstofftechnik (Materials Science and Engineering Technology), vol.55, no.12, pp.1751-1764, Wiley, December 2024, https://doi.org/10.1002/mawe.202400087       Article

S. K. Nayak and A. Satapathy,"Steady state analysis on sliding wear behavior of waste marble dust filled kenaf-polyester composites", Materials Science & Engineering Technology, vol.54, no.11, pp.1407-1419, Wiley, June 2023, 10.1002/mawe.202200307       Article