Siba Sankar Mahapatra

Professor HAG

Mechanical Engineering

 (+91) 661 246 2512 , 3512

 ssm[at]nitrkl.ac.in

 Biosketch

275

Publications       

0

Sponsored Projects

0

Consultancy Projects

20

Doctoral Students

5

Continuing Education

24

PG Dissertation

 Personal Information

Prof. Siba Sankar Mahapatra

Professor HAG

Mechanical Engineering

Joined in Oct 1986

 Room Number: ME-012

 Department of Mechanical Engineering, National Institute of Technology Rourkela, Sundargarh, Odisha, India - 769008

 Education Qualification

  1. Ph.D.(IIT Kharagpur)

 Experience

No Experience Found....

 Expertise Information

Research Group
Industrial Engineering: [Production Engineering Division]
Areas of Interest
Operations Management

 Projects

No Projects Found....

 Continuing Education

Short Term Training Programme on Design of Experiments: An Optimization Tool

 Mechanical Engineering

 Coordinator

 21 Dec 2015 - 24 Dec 2015

Short-term Course

Short Term Training Programme on Design of Experiments: An Optimisation Tool

 Mechanical Engineering

 Coordinator

 22 Dec 2014 - 25 Dec 2014

Short-term Course

Short Term Training Program on Design of Experiments: An Optimization Tool (DOEOT-2013)

 Mechanical Engineering

 Coordinator

 27 Dec 2013 - 29 Dec 2013

Short-term Course

NATIONAL CONFERENCE On Tissue Engineering & Regenerative Medicine (NCTERM-2017)

 Biotechnology and Medical Engineering

 Coordinator

 19 Jul 2017 - 20 Jul 2017

Conference

5 days Capacity Building Programme on PROJECT MANAGEMENT FOR PUBLIC HEALTH NUTRITION

 Humanities and Social Sciences

 Coordinator

 06 May 2019 - 10 May 2019

Workshop

 Publications

54

Google Scholar h-index

188

Google Scholar i10-index

41

Scopus h-index

Total Publications: 275
S. Chatterjee, S. K. Sahoo, B. K. Swain, S. S. Mahapatra, and T. Roy, "Quality characterization of dissimilar laser welded joints of Ti6Al4V with AISI 304 by using copper deposition technique", International Journal of Advanced Manufacturing Technology, vol.106, no.9-10, pp.4577-4591, Springer, February 2020, 10.1007/s00170-020-04935-5 Article
A. K. Sahu, J. Thomas, and S. S. Mahapatra, "An Intelligent Approach to Optimize the Electrical Discharge Machining of Titanium Alloy by Simple Optimization Algorithm", Proceedings of Institution of Mechanical Engineers Part E: Journal of Process Mechanical Engineering, Sage 2020, 10.1177/0954408920964685 Article
R. K. Satankar, N. Sharma, S. K. Panda, and S. S. Mahapatra, "Experimental and simulation study of eigen frequency responses of Luffa cylindrica sponge fibre polymer composite", Materials Today Proceedings, vol.33, no.8, pp.5561-5565, Elsevier 2020, 10.1016/j.matpr.2020.03.552 Article
S. Chatterjee, A. K. Pandey, S. S. Mahapatra, K. S. Arora, and A. Behera, "Microstructural variation at interface during Fiber laser joining of NiTi/Ti6Al4V and effect of mechanical strength", Journal of Materials Processing Technology, vol.282, pp.116661, Elsevier publisher 2020, https://doi.org/10.1016/j.jmatprotec.2020.116661 Article
A. K. Sahu and S. S. Mahapatra, "Performance analysis of Cu-W-B4C composite tool during electrical discharge machining of titanium alloy", Proceedings of Insitution of Mechanical Engineering Part C: Journal of Mechanical Engineering Scienc, Sage 2020, 10.1177/0954406220951597 Article

Show All Publications(+)

S. Chatterjee, S. S. Mahapatra, K. S. Arora, and A. Behera, "Physical and Mechanical Characterization of Dissimilar Laser Welded Joints of AISI 316/Cu/SMA using Fiber Laser Technology", Journal of Laser Applications, vol.32, pp.032018.1-18, AIP Publishing 2020, https://doi.org/10.2351/7.0000003 Article
S. Chatterjee, S. S. Mahapatra, K. S. Arora, and A. Behera, "Physical and Mechanical Characterization of Dissimilar Laser Welded Joints of AISI 316/Cu/SMA using Fiber Laser Technology", Journal of Laser Applications, vol.32, pp.032018, Laser Institute of America 2020, https://doi.org/10.2351/7.0000003 Article
A. K. Sahu and S. S. Mahapatra, "Prediction and Optimization of Performance Measures in Electrical Discharge Machining using Rapid Prototyping Tool Electrodes", Journal of Intelligent Manufacturing, Springer 2020, https://doi.org/10.1007/s10845-020-01624-8 Article
S. Chatterjee, S. S. Mahapatra, V. Bharadwaj, B. Upadhyay, K. Bindra, and J. Thomas, "Parametric appraisal of mechanical and metallurgical behavior of butt welded joints using pulsed Nd:YAG laser on thin sheets of AISI 316", Optics and Laser Technology, vol.117, pp.186-199, Elsevier, September 2019, 10.1016/j.optlastec.2019.04.004 Article
A. K. Pandey, K. C. Nayak, and S. S. Mahapatra, "Characterization of friction stir spot welding between copper and poly-methyl-methacrylate (PMMA) sheet", Materials Today Communications, vol.19, pp.131-139, Elsevier, June 2019, 10.1016/j.mtcomm.2019.01.010 Article
S. Jaipuria and S. S. Mahapatra, "A study on behaviour of bullwhip effect in (R, S) inventory control system considering DWT-MGGP demand forecasting model", Journal of Modelling in Management, vol.14, no.2, pp.385-407, Emerald, May 2019, /10.1108/JM2-04-2018-0053 Article
A. K. Sahu, S. K. Sahu, S. Datta, and S. S. Mahapatra, "Machinability appraisement of inconel 825 during electro-discharge machining: use of transformer oil as dielectric media", in MSIE 2019 Proceedings of the 2019 International Conference on Management Science and Industrial Engineering, pp.240-244, Association for Computing Machinery, Phuket, Thailand, May 2019, 10.1145/3335550.3335558 Inproceedings
. Rahul, S. Datta, B. B. Biswal, and S. S. Mahapatra, "Machinability analysis of Inconel 601, 625, 718 and 825 during electro-discharge machining: On evaluation of optimal parameters setting", Measurement, vol.137, pp.382-400, Elsevier, April 2019, 10.1016/j.measurement.2019.01.065 Article
R. Buddala and S. S. Mahapatra, "An integrated approach for scheduling flexible job-shop using teaching–learning-based optimization method", Journal of Industrial Engineering International, vol.15, no.1, pp.181–192, Springer, March 2019, 10.1007/s40092-018-0280-8 Article
S. Nigam, S. S. Mahapatra, and S. K. Patel, "Effect of stand-off distance in thermally sprayed copper coating", Surface Engineering, vol.35, no.9, pp.826-832, Taylor & Francis, February 2019, 10.1080/02670844.2019.1581690 Article
R. Buddala and S. S. Mahapatra, "Two-stage teaching-learning-based optimization method for flexible job-shop scheduling under machine breakdown", The International Journal of Advanced Manufacturing Technology, vol.100, no.5-8, pp.1419–1432, Springer, February 2019, 10.1007/s00170-018-2805-0 Article
U. K. Sahu, S. Sahu, S. S. Mahapatra, and Raj. K. Patel, "Synthesis and characterization of magnetic bio-adsorbent developed from Aegle marmelos leaves for removal of As(V) from aqueous solutions", Environmental Science and Pollution Research, vol.26, no.1, pp.946–958, Springer, January 2019, 10.1007/s11356-018-3643-1 Article
U. K. Sahu, S. Sahu, S. S. Mahapatra, and Raj. K. Patel, "Synthesis and characterization of magnetic bio-adsorbent developed from Aegle marmelos leaves for removal of As(V) from aqueous solutions", Environmental Science and Pollution Research,, vol.26, no.1, pp.946–958, Springer, January 2019, 10.1007/s11356-018-3643-1 Article
K. Abhishek, V. R. Kumar, S. Datta, and S. S. Mahapatra, "An integrated multi-response optimization route combining principal component analysis (PCA), fuzzy inference system (FIS), nonlinear regression and JAYA algorithm: a case experimental study on machining of GFRP (Epoxy) composites", International Journal of Industrial and Systems Engineering, vol.32, no.4, pp.497-525, Inderscience 2019, 10.1504/IJISE.2019.101334 Article
S. Chatterjee, S. S. Mahapatra, V. Bhardwaj, A. Choubey, B. Upadhyay, and K. Bindra, "Drilling of micro-holes on titanium alloy using pulsed Nd:YAG laser: Parametric appraisal and prediction of performance characteristics", Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol.233, no.8, pp.1872-1889, Sage 2019, 10.1177/0954405418805604 Article
B. B. Nayak and S. S. Mahapatra, "Effect of deep cryogenic treatment on performance measures in wire electrical discharge machining process during taper cutting operation", International Journal of Productivity and Quality Management, vol.26, no.1, Inderscience 2019, 10.1504/IJPQM.2019.096969 Article
M. Rakesh, S. Datta, and S. S. Mahapatra, "Effects of depth of cut during machining of Inconel 718 using uncoated WC Tool", Materials Today: Proceedings, vol.18, no.part 7, pp.3667–3675, Elsevier 2019, 10.1016/j.matpr.2019.07.300 Article
J. Thrinadh, . Rahul, S. Datta, and S. S. Mahapatra, "Electro-Discharge Machining (EDM) of Super Alloy Inconel 718 using Triangular Cross Sectioned Copper Tool Electrode: Emphasis on Topography and Metallurgical Characteristics of the EDMed Work Surface", Proceedings of the National Academy of Sciences, India Section A: Physical Sciences, Springer 2019, 10.1007/s40010-019-00642-3 Article
A. K. Sahu and S. S. Mahapatra, "Optimization of surface roughness parameters by different multi-response optimization techniques during electro-discharge machining of titanium alloy", Non-Conventional Machining in Modern Manufacturing Systems, ch.4, pp.27, IGI Global 2019, 10.4018/978-1-5225-6161-3.ch004 Inbook
P. Patnaik, S. Datta, and S. S. Mahapatra, "WEDM performance of Ti-6Al-4V: Emphasis on multi-cut strategy and effects of electrode Wire", Materials Today: Proceedings, vol.18, no.part 7, pp.4102–4110, Elsevier 2019, 10.1016/j.matpr.2019.07.354 Article
S. K. Padhi, S. S. Mahapatra, R. Padhi, and H. C. Das, "Performance analysis of a thick copper-electroplated FDM ABS plastic rapid tool EDM electrode", Advances in Manufacturing, vol.6, no.4, pp.442-456, Springer, December 2018, 10.1007/s40436-018-0238-5 Article
A. K. Sahu, S. S. Mahapatra, S. Chatterjee, and J. Thomas, "Optimization of surface roughness by MOORA method in EDM by electrode prepared via selective laser sintering process", Materials Today: Proceedings, vol.5, no.9, part-3, pp.19019-19026, Elsevier, October 2018, 10.1016/j.matpr.2018.06.253 Article
R. Buddala and S. S. Mahapatra, "Improved teaching–learning-based and JAYA optimization algorithms for solving flexible flow shop scheduling problems", Journal of Industrial Engineering International, vol.14, no.3, pp.555-570, Springer, September 2018, 10.1007/s40092-017-0244-4 Article
S. Chatterjee, S. S. Mahapatra, V. Bharadwaj, A. Choubey, B. N. Upadhyay, and K. S. Bindra, "Quality evaluation of micro drilled hole using pulsed Nd:YAG laser: a case study on AISI 316", Lasers in Manufacturing and Materials Processing, vol.5, no.3, pp.248–269, Springer, September 2018, 10.1007%2Fs40516-018-0067-1 Article
S. Chatterjee, S. S. Mahapatra, A. Mondal, and K. Abhishek, "An experimental study on drilling of titanium alloy using CO2 laser", Sadhana, vol.43, pp.131, Springer, August 2018, 10.1007/s12046-018-0903-1 Article
A. K. Sahu and S. S. Mahapatra, "Optimization of electrical discharge machining of titanium alloy (Ti6Al4V) by grey relational analysis based firefly algorithm", Additive Manufacturing of Emerging Materials, ch.2, pp.29-53, Springer, August 2018, 10.1007/978-3-319-91713-9_2 Inbook
S. B. Mishra and S. S. Mahapatra, "An experimental investigation on strain controlled fatigue behaviour of FDM build parts", International Journal of Productivity and Quality Management, vol.24, no.3, Indserscience, June 2018, 10.1504/IJPQM.2018.092980 Article
S. B. Mishra and S. S. Mahapatra, "An experimental investigation on strain controlled fatigue behaviour of FDM build parts", International Journal of Productivity and Quality Management, vol.24, no.3, pp.323-345, Inderscience, June 2018, 10.1504/IJPQM.2018.092980 Article
D. K. Mishra, . Rahul, S. Datta, M. Masanta, and S. S. Mahapatra, "Through hole making by electro-discharge machining (EDM) on inconel 625 super alloy using hollow copper tool electrode", Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engine, SAGE, June 2018, 10.1177/0954408918784701 Article
C. P. Mohanty, M. P. Satpathy, S. S. Mahapatra, and M. R. Singh, "Optimization of cryo-treated EDM variables using TOPSIS-based TLBO algorithm", Sadhana, vol.43, no.51, Springer, April 2018, 10.1007/s12046-018-0829-7 Article
U. K. Sahu, S. S. Mahapatra, and Raj. K. Patel, "Application of Box–Behnken Design in response surface methodology for adsorptive removal of arsenic from aqueous solution using CeO2/Fe2O3/graphene nanocomposite", Materials Chemistry and Physics, vol.207, pp.233-242, Elsivier, March 2018, 10.1016/j.matchemphys.2017.11.0420254-0584/ Article
N. Sharma and S. S. Mahapatra, "A preliminary analysis of increase in water use with carbon capture and storage for Indian coal-fired power plants", Environmental Technology & Innovation, vol.9, pp.51-62, Elsevier, February 2018, 10.1016/j.eti.2017.10.002 Article
D. Tambuskar, B. Narkhede, and S. S. Mahapatra, "A flexible clustering approach for virtual cell formation considering real-life production factors using Kohonen self-organising map", International Journal of Industrial and Systems Engineering, vol.28, no.2, Inderscience 2018, 10.1504/IJISE.2018.089137 Article
P. P. Mohanty, S. S. Mahapatra, A. Mohanty, and . Sthitapragyan, "A novel multi-attribute decision making approach for selection of appropriate product conforming ergonomic considerations", Operations Research Perspectives, vol.5, pp.82-93, Elsevier 2018, 10.1016/j.orp.2018.01.004 Article
C. Upadhyay, . Rahul, S. Datta, S. S. Mahapatra, and B. B. Biswal, "An experimental investigation on electro discharge machining of Inconel 601", International Journal of Industrial and Systems Engineering, vol.29, no.2, pp.223-251, Inderscience Publishers 2018, 10.1504/IJISE.2018.091901 Article
R. Buddala and S. S. Mahapatra, "An integrated approach for scheduling flexible job-shop using teaching–learning-based optimization method", Journal of Industrial Engineering International, Springer 2018, 10.1007/s40092-018-0280-8 Article
. Rahul, S. Datta, M. Masanta, B. B. Biswal, and S. S. Mahapatra, "Analysis on surface characteristics of electro-discharge machined Inconel 718", International Journal of Materials and Product Technology, vol.56, no.1/2, pp.135-168, Inderscience Publishers 2018, 10.1504/IJMPT.2018.089121 Article
B. K. Paul, S. K. Sahu, J. Thrinadh, S. Datta, D. Dhupal, and S. S. Mahapatra, "Effects of addition of copper powder in the dielectric media (EDM Oil) on performance of electro-discharge machining of inconel 718 super alloys", Materials Today: Proceedings, vol.5, no.9 (part 3), pp.17618-17626, Elsevier 2018, 10.1016/j.matpr.2018.06.080 Article
A. K. Sahu and S. S. Mahapatra, "Electrical discharge coating by copper-tungsten composite electrode prepared by powder metallurgy route", Soft Computing Techniques and Applications in Mechanical Engineering, ch.10, pp.195-224, IGI Global 2018, 10.4018/978-1-5225-3035-0.ch010 Inbook
J. Thrinadh, S. Datta, and S. S. Mahapatra, "Electro-discharge machining of inconel 718 using square cross sectioned copper Tool Electrode: Studies on Topography and Metallurgical Features of the EDMed work surface", Materials Today: Proceedings, vol.5, no.2, part-1, pp.4847–4854, Elsevier 2018, 10.1016/j.matpr.2017.12.060 Article
A. Bara, S. K. Sahoo, S. S. Naik, A. K. Sahu, and S. S. Mahapatra, "Multi response optimization of Nd:YAG laser micro drilling characteristics of 304 stainless steel using desirability function approach", Materials Today: Proceedings, vol.5, no.9,part-3, pp.18975-18982, Elsevier 2018, 10.1016/j.matpr.2018.06.248 Article
J. Thomas, A. K. Sahu, and S. S. Mahapatra, "Multi-objective optimization of water jet machining process using simple optimization algorithm(SOPT)", Materials Today: Proceedings, vol.5, no.9, part-3, pp.19034-19042, Elsevier 2018, 10.1016/j.matpr.2018.06.255 Article
. Rahul, A. Srivastava, D. K. Mishra, S. Chatterjee, S. Datta, B. B. Biswal, and S. S. Mahapatra, "Multi-response optimization during electro-discharge machining of super alloy inconel 718: application of PCA-TOPSIS", Materials Today: Proceedings, vol.5, no.2, part-1, pp.4269–4276, Science Direct 2018, 10.1016/j.matpr.2017.11.691 Article
B. K. Sahu, S. Datta, and S. S. Mahapatra, "On electro-discharge machining of Inconel 718 super alloys: an experimental investigation", Materials Today: Proceedings, vol.5, no.1, part 1, pp.4861–4869, Elsevier 2018, 10.1016/j.matpr.2017.12.062 Article
D. K. Sen, S. Datta, and S. S. Mahapatra, "On evaluation of supply chain’s ecosilient (G-Resilient) performance index: a fuzzy embedded decision support framework", Benchmarking: an International Journal, Emerald 2018, 10.1108/BIJ-03-2017-0038 Article
. Rahul, S. Datta, B. B. Biswal, and S. S. Mahapatra, "Optimization of EDM responses on super alloy Inconel 718: use of satisfaction function approach combined with Taguchi philosophy", Materials Today: Proceedings, vol.5, no.2, pp.4376–4383, Elsevier 2018, 10.1016/j.matpr.2017.12.005 Article
D. K. Sen, S. Datta, and S. S. Mahapatra, "Sustainable supplier selection in intuitionistic fuzzy environment: a decision making perspective", Benchmarking: An International Journal, vol.25, no.2, pp.545-574, Emerald Publishing 2018, 10.1108/BIJ-11-2016-0172 Article
U. K. Sahu, S. S. Mahapatra, and Raj. K. Patel, "Application of box–behnken design in response surface methodology for adsorptive removal of arsenic from aqueous solution using CeO2/Fe2O3/graphene nanocomposite", Materials Chemistry and Physics, vol.207, pp.233-242, Elsiver, December 2017, 10.1016/j.matchemphys.2017.11.042 Article
S. K. Sahoo, A. K. Sahu, and S. S. Mahapatra, "Environmental friendly electroless copper metallization on FDM build ABS parts", International Journal of Plastics Technology, vol.21, no.2, pp.297-312, Springer, December 2017, 10.1007/s12588-017-9185-4 Article
S. B. Mishra, R. Malik, and S. S. Mahapatra, "Effect of external perimeter on flexural strength of FDM build parts", Arabian Journal of Science and Engineering, vol.42, no.11, pp.4587–4595, Springer, November 2017, 10.1007/s13369-017-2598-8 Article
U. K. Sahu, S. Sahu, S. S. Mahapatra, and Raj. K. Patel, "Cigarette soot activated carbon modified with Fe3O4 nanoparticles as an effective adsorbent for As(III) and As(V): Material preparation, characterization and adsorption mechanism study", Journal of Molecular Liquids, vol.243, pp.395-405, Elsevier, October 2017, 10.1016/j.molliq.2017.08.055 Article
C. Samantra, S. Datta, and S. S. Mahapatra, "Fuzzy based risk assessment module for metropolitan construction project: an empirical study", Engineering Applications of Artificial Intelligence, vol.65, pp.449-464, Elsevier, October 2017, 10.1016/j.engappai.2017.04.019 Article
S. K. Padhi, R. K. Sahu, S. S. Mahapatra, H. C. Das, A. K. Sood, B. Patra, and A., "Optimization of fused deposition modeling process parameters using a fuzzy inference system coupled with Taguchi philosophy", Advances in Manufacturing, vol.5, no.3, pp.231-242, Springer, September 2017, 10.1007/s40436-017-0187-4 Article
D. K. Sen, S. Datta, S. K. Patel, and S. S. Mahapatra, "Green Supplier Selection in Fuzzy Context: A Decision Making Scenario on Application of Fuzzy-MULTIMOORA", International Journal of Services and Operations Management, vol.28, no.1, Inderscience, August 2017, 10.1504/IJSOM.2017.085907 Article
N. Sharma, U. Singh, and S. S. Mahapatra, "Prediction of cost and emission from Indian coal-fired power plants with CO2 capture and storage using artificial intelligence techniques", Fronties in Energy, pp.1-14, Springer, July 2017, 10.1007/s11708-017-0482-6 Article
U. K. Sahu, S. S. Mahapatra, and Raj. K. Patel, "Synthesis and characterization of an eco-friendly composite of jute fiber and Fe2O3 nanoparticles and its application as an adsorbent for removal of As(V) from water", Journal of Molecular Liquids, vol.237, pp.313-321, Elsiver, July 2017, 10.1016/j.molliq.2017.04.092 Article
. Rahul, S. Datta, B. B. Biswal, and S. S. Mahapatra, "A novel satisfaction function and distance-based approach for machining performance optimization during electro-discharge machining on super alloy Inconel 718", Arabian Journal for Science and Engineering, vol.42, no.5, pp.1999-2020, Springer, May 2017, 10.1007/s13369-017-2422-5 Article
C. P. Mohanty, S. S. Mahapatra, and M. R. Singh, "Effect of deep cryogenic treatment on machinability of Inconel 718 in powder-mixed EDM", International Journal of Machining and Machinability of Materials, vol.19, no.4, Inderscience, April 2017, 10.1504/IJMMM.2017.086164 Article
. Rahul, S. Datta, B. B. Biswal, and S. S. Mahapatra, "Electrical discharge machining of Inconel 825 using cryogenically treated copper electrode: emphasis on surface integrity and metallurgical characteristics", Journal of Manufacturing Processes, vol.26, pp.188-202, Elsevier, April 2017, 10.1016/j.jmapro.2017.02.020 Article
S. B. Mishra, R. Pattnaik, and S. S. Mahapatra, "Parametric analysis of wear behaviour on fused deposition modelling build parts", International Journal of Productivity and Quality Management, vol.21, no.3, pp.375-391, Inderscience, March 2017, 10.1504/IJPQM.2017.10005238 Article
C. R. Matawale, S. Datta, and S. S. Mahapatra, "Performance appraisement and benchmarking of leagility inspired enterprises: a fuzzy-based decision making approach", International Journal of Services and Operations Management, vol.26, no.4, pp.498-526, Inderscience Publishers, Switzerland, March 2017, 10.1504/IJSOM.2017.082895 Article
B. B. Nayak and S. S. Mahapatra, "An intelligent approach for multi-response optimisation of WEDM parameters", International Journal of Industrial and Systems Engineering, vol.25, no.2, pp.197-227, Inderscience, February 2017, /10.1504/IJISE.2017.081518 Article
U. K. Sahu, M. K. Sahu, S. S. Mahapatra, and Raj. K. Patel, "Removal of As (III) from aqueous solution using Fe3O4 nanoparticles: process modeling and optimization using statistical design", Water, Air, & Soil Pollution, vol.228, no.45, Springer, January 2017, 10.1007/s11270-016-3224-1 Article
U. K. Sahu, M. K. Sahu, S. S. Mahapatra, and Raj. K. Patel, "Removal of as(III) from aqueous solution using Fe3O4 nanoparticles: process modeling and optimization using statistical design", Water Air Soil Pollution, vol.228, no.45, Springer, January 2017, 10.1007/s11270-016-3224-1 Article
C. Samantra, S. Datta, and S. S. Mahapatra, "A risk-based decision support framework for selection of appropriate safety measure system for underground coal mines", International Journal of Injury Control and Safety Promotion, vol.24, no.1, pp.54-68, Taylor & Francis, December 2017, 10.1080/17457300.2015.1061561 Article
D. K. Sen, S. Datta, and S. S. Mahapatra, "Dominance based fuzzy decision support framework for g-resilient (ecosilient) supplier selection: an empirical modelling", International Journal of Sustainable Engineering, vol.10, no.6, pp.338-357, Taylor and Francis 2017, 10.1080/19397038.2017.1286410 Article
A. K. Sahu, S. Datta, and S. S. Mahapatra, "Evaluation of performance index in resilient supply chain: a fuzzy based approach", Benchmarking: An International Journal, vol.24, no.1, pp.118-142, Emerald 2017, 10.1108/BIJ-07-2015-0068 Article
D. K. Sen, S. Datta, and S. S. Mahapatra, "Extension of TODIM for decision making in fuzzy environment: a case empirical research on selection of industrial robot", International Journal of Services and Operations Management, vol.26, no.2, Inderscience Publishers 2017, 10.1504/IJSOM.2017.081492 Article
K. Abhishek, S. Datta, M. Masanta, and S. S. Mahapatra, "Fuzzy Embedded Imperialist Competitive Algorithm (ICA) for Multi-Response Optimization during Machining of CFRP (Epoxy) Composites", in 2017 International Conference on Advances in Mechanical, Industrial, Automation and Management Systems (AMIAMS), Allahabad, pp.100-103, IEEE 2017, 10.1109/AMIAMS.2017.8069196 Inproceedings
D. K. Sen, S. Datta, S. K. Patel, and S. S. Mahapatra, "Green supplier selection in fuzzy context: a decision-making scenario on application of fuzzy-MULTIMOORA", International Journal of Services and Operations Management, vol.28, no.1, pp.98-140, Inderscience Publications 2017, 10.1504/IJSOM.2017.085907 Article
K. Abhishek, S. Chatterjee, S. Datta, and S. S. Mahapatra, "Integrating principal component analysis, fuzzy linguistic reasoning and taguchi philosophy for quality-productivity optimization", Materials Today: Proceedings, vol.4, no.2, part-a, pp.1772–1777, Elsevier 2017, 10.1016/j.matpr.2017.02.019 Article
. Rahul, K. Abhishek, S. Datta, B. B. Biswal, and S. S. Mahapatra, "Machining performance optimisation during EDM of Inconel 718: a case experimental investigation", International Journal of Productivity and Quality Management, vol.21, no.4, pp.460-489, Inderscience Publishers 2017, 10.1504/IJPQM.2017.10005844 Article
K. Abhishek, S. Datta, and S. S. Mahapatra, "Multi-objective optimisation during drilling of CFRP composites: a PCA-fuzzy Taguchi integrated approach", International Journal of Industrial and Systems Engineering, vol.26, no.2, Inderscience Publishers 2017, 10.1504/IJISE.2017.083672 Article
C. K. Hirwani, S. K. Panda, T. R. Mahapatra, and S. S. Mahapatra, "Nonlinear transient finite-element analysis of delaminated composite shallow shell panels", AIAA Journal, vol.55, no.5, pp.1734-1748, Aerospace Research Central 2017, 10.2514/1.J055624 Article
C. K. Hirwani, S. K. Panda, T. R. Mahapatra, and S. S. Mahapatra, "Numerical study and experimental validation of dynamic characteristics of delaminated composite flat and curved shallow shell structure", Journal of Aerospace Engineering, vol.30, no.5, American Society of Civil Engineers (ASCE) 2017, 10.1061/(ASCE)AS.1943-5525.0000756 Article
K. Abhishek, S. Datta, and S. S. Mahapatra, "Optimization of MRR, surface roughness, and maximum tool-tip temperature during machining of CFRP composites", Materials Today: Proceedings, vol.4, no.2, part a, pp.2761–2770, Elsevier 2017, 10.1016/j.matpr.2017.02.154 Article
S. D. Mohanty, R. C. Mohanty, and S. S. Mahapatra, "Study on performance of EDM electrodes produced through rapid tooling route", Journal of Advanced Manufacturing Systems, vol.16, no.4, World Scientific 2017, 10.1142/S0219686717500214 Article
C. Matawale, S. Datta, and S. S. Mahapatra, "Supplier/partner selection in agile supply chain: Application of vague set as a decision making tool", Benchmarking, vol.23, no.4, pp.866-892, Emerald, December 2016, 10.1108/BIJ-03-2014-0020 Article
C. K. Hirwani, S. K. Panda, S. S. Mahapatra, S. K. Mandal, L. Srivastava, and M. K. Buragohain, "Flexural strength of delaminated composite plate–An experimental validation", International Journal of Damage Mechanics, pp.1-34, Sage Publications, November 2016, 10.1177/1056789516676515 Article
. Rahul, K. Abhishek, S. Datta, B. B. Biswal, and S. S. Mahapatra, "Machining performance optimization for electro-discharge machining of Inconel 601, 625, 718 and 825: an integrated optimization route combining satisfaction function, fuzzy inference system and Taguchi approach", Journal of the Brazilian Society of Mechanical Sciences and Engineering, pp.1-29, Springer, November 2016, 10.1007/s40430-016-0659-7 Article
C. Upadhyay, S. Datta, M. Masanta, and S. S. Mahapatra, "An experimental investigation emphasizing surface characteristics of electro-discharge-machined Inconel 601", Journal of the Brazilian Society of Mechanical Sciences and Engineering, pp.1-16, Springer, October 2016, 10.1007/s40430-016-0643-2 Article
D. K. Sen, S. Datta, and S. S. Mahapatra, "Application of TODIM (Tomada de Decisión Inerativa Multicritero) for industrial robot selection", Benchmarking: An International Journal, vol.23, no.7, pp.1818-1833, Emerald, October 2016, 10.1108/BIJ-07-2015-0078 Article
D. K. Sen, S. Datta, and S. S. Mahapatra, "Decision support framework for selection of 3PL service providers: Dominance-based approach in combination with grey set theory", International Journal of Information Technology & Decision Making, vol.16, no.1, pp.25-57, World Scientific, October 2016, 10.1142/S0219622016500474 Article
C. R. Matawale, S. Datta, and S. S. Mahapatra, "Supplier selection in agile supply chain: Application potential of FMLMCDM approach in comparison with Fuzzy-TOPSIS and Fuzzy-MOORA", Benchmarking: An International Journal, vol.23, no.7, pp.2027-2060, Emerald, October 2016, 10.1108/BIJ-07-2015-0067 Article
D. K. Sen, S. Datta, and S. S. Mahapatra, "A TODIM-based decision support framework for g-resilient supplier selection in fuzzy environment", Asia-Pacific Journal of Operational Research, vol.33, no.5, World Scientific, September 2016, 10.1142/S0217595916500330 Article
K. Abhishek, V. R. Kumar, S. Datta, and S. S. Mahapatra, "Application of JAYA algorithm for the optimization of machining performance characteristics during the turning of CFRP (epoxy) composites: comparison with TLBO, GA, and ICA", Engineering with Computers, pp.1-19, Springer, September 2016, 10.1007/s00366-016-0484-8 Article
D. K. Sen, S. Datta, S. K. Patel, and S. S. Mahapatra, "Fuzzy-TODIM for industrial robot selection", in 1st International Conference on Emerging Trends in Mechanical Engineering,, IEEE, Hyderabad, India, September 2016 Inproceedings
S. Nigam, S. S. Mahapatra, and S. K. Patel, "Numerical modelling of sliding wear caused by pin-on-disk method over copper coated ABS plastic substrate", IOP Conference Series: Materials Science and Engineering, vol.149, no.1, IOP Publishing, September 2016, 10.1088/1757-899X/149/1/012079 Article
U. Sahu, M. Sahu, S. S. Mahapatra, and Raj. K. Patel, "Removal of As(V) from aqueous solution by Ce-Fe bimetal mixed oxide", Journal of Environmental Chemical Engineering, vol.4, no.3, pp.2892-2899, Elsevier, September 2016, 10.1016/j.jece.2016.05.041 Article
S. Nigam, S. K. Patel, and S. S. Mahapatra, "Sliding wear analysis of a metallic coating on ABS plastic substrate", Applied Mechanics & Materials, vol.852, pp.381-387, Trans Tech Publications, September 2016, 10.4028/www.scientific.net/AMM.852.381 Article
A. K. Sahu, S. Datta, and S. S. Mahapatra, "Evaluation and selection of suppliers considering green perspectives: Comparative analysis on application of FMLMCDM and fuzzy-TOPSIS", Benchmarking: An International Journal, vol.23, no.6, pp.1579-1604, Emerald, August 2016, 10.1108/BIJ-12-2014-0111 Article
C. P. Mohanty, S. S. Mahapatra, and M. R. Singh, "An intelligent approach to optimize the EDM process parameters using utility concept and QPSO algorithm", Engineering Science and Technology, an International Journal, Elsevier, July 2016, 10.1016/j.jestch.2016.07.003 Article
C. K. Hirwani, R. K. Patil, S. K. Panda, S. S. Mahapatra, S. K. Mandal, L. Srivastav, and M. K. Buragohain, "Experimental and numerical analysis of free vibration of delaminated curved panel", Aerospace Science and Technology, vol.54, pp.353-370, Elsevier, July 2016, 10.1016/j.ast.2016.05.009 Article
A. K. Mehar, S. S. Mahapatra, and S. K. Patel, "Fabrication, processing and assessment of mechanical behaviour of Hydroxyapatite (HAp) reinforced Polycarbonate (PC) Composite for bio-medical applications", Trends in Industrial and Mechanical Engineering, pp.84-90, Ethan Publishing, July 2016 Article
U. Singh, N. Sharma, and S. S. Mahapatra, "Environmental life cycle assessment of Indian coal-fired power plants", International Journal of Coal Science & Technology, vol.3, no.2, pp.215-225, Springer, June 2016, 10.1007/s40789-016-0136-z Article
C. Samantra, S. Datta, and S. S. Mahapatra, "Analysis of occupational health hazards and associated risks in fuzzy environment: A case research in an Indian underground coal mine", International Journal of Injury Control and Safety Promotion, pp.1-17, Taylor & Francis, May 2016, 10.1080/17457300.2016.1178298 Article
S. K. Sharma, S. S. Mahapatra, and Mb. Parappagoudar, "Benchmarking of product recovery alternatives in reverse logistics", Benchmarking: An International Journal, vol.23, no.2, pp.406-424, Emerald, March 2016, 10.1108/BIJ-01-2014-0002 Article
K. Abhishek, S. Chatterjee, S. Datta, and S. S. Mahapatra, "Integrating principal component analysis, fuzzy linguistic reasoning and taguchi philosophy for quality-productivity optimization in manufacturing context: a case study", in 5th International Conference on Materials Processing and Characterization, Hyderabad, India, March 2016 Inproceedings
B. B. Nayak and S. S. Mahapatra, "Optimization of WEDM process parameters using deep cryo-treated Inconel 718 as work material", Engineering Science and Technology, an International Journal, vol.19, no.1, pp.161-170, Elsevier, March 2016, 10.1016/j.jestch.2015.06.009 Article
S. Chatterjee, S. S. Mahapatra, and K. Abhishek, "Simulation and optimization of machining parameters in drilling of titanium alloys", Simulation Modelling Practice and Theory, vol.62, pp.31-48, Elsevier, March 2016, 10.1016/j.simpat.2015.12.004 Article
S. Jaipuria and S. S. Mahapatra, "A system dynamic approach to study the behaviour of serial supply chain under uncertain environment", International Journal of Services and Operations Management, vol.24, no.2, pp.208-234, Inderscience Publishers, February 2016, 10.1504/IJSOM.2016.076504 Article
C. Samantra, S. Datta, S. S. Mahapatra, and B. R. Debata, "Interpretive structural modelling of critical risk factors in software engineering project", Benchmarking: An International Journal, vol.23, no.1, pp.2-24, Emerald, February 2016, 10.1108/BIJ-07-2013-0071 Article
K. Abhishek, S. Datta, and S. S. Mahapatra, "Multi-objective optimization in drilling of CFRP (polyester) composites: Application of a fuzzy embedded harmony search (HS) algorithm", Measurement, vol.77, pp.222-239, Elsevier, January 2016, 10.1016/j.measurement.2015.09.015 Article
C. R. Matawale, S. Datta, and S. S. Mahapatra, "A fuzzy embedded leagility assessment module in supply chain", Benchmarking: An International Journal, vol.23, no.7, pp.1937-1982, Emerald, December 2016, 10.1108/BIJ-12-2013-0113 Article
A. Srivastava, K. Abhishek, S. Datta, C. Upadhyay, and S. S. Mahapatra, "Effect of variation of electrode material on machining performance of Al 6061 during EDM operation", in National Level Symposium on Materials Characterization and Manufacturing (MCM-2016),, pp.1-36, Goa, India, December 2016 Inproceedings
A. Sahu, S. Datta, and S. S. Mahapatra, "Evaluation and selection of resilient suppliers in fuzzy environment: Exploration of fuzzy-VIKOR", Benchmarking, vol.23, no.3, pp.651-673, Emerald, December 2016, 10.1108/BIJ-11-2014-0109 Article
D. Sen, S. Datta, and S. S. Mahapatra, "Extension of PROMETHEE for robot selection decision making: Simultaneous exploration of objective data and subjective (fuzzy) data", Benchmarking: An International Journal, vol.23, no.4, pp.983-1014, Emerald, December 2016, 10.1108/BIJ-08-2015-0081 Article
D. K. Sen, S. Datta, S. K. Patel, and S. S. Mahapatra, "G-resilient supplier selection in fuzzy environment: application potential of satisfaction function and distance based approach", in 4 th Asia Conference on Mechanical and Materials Engineering (ACMME), ACMME, Kuala Lumpur, Malaysia, December 2016 Inproceedings
C. P. Mohanty, S. S. Mahapatra, and J. Sahu, "Parametric optimisation of electrical discharge machining process: a numerical approach", International Journal of Industrial and Systems Engineering, vol.22, no.2, pp.207-244, Inderscience Publishers, December 2016, 10.1504/IJISE.2016.073963 Article
K. Abhishek, S. Chatterjee, S. Datta, and S. S. Mahapatra, "Application of NSGA II for optimization of multi-performance characteristics during machining of GFRP (epoxy) composites", Materials Today: Proceedings, vol.2, no.4, pp.2353-2358, Elsevier, December 2015, 10.1016/j.matpr.2015.07.298 Article
K. Abhishek, S. Datta, and S. S. Mahapatra, "Optimization of multi-performance characteristics during drilling of GFRP (Epoxy) composites by harmony search algorithm", Materials Today: Proceedings, vol.2, no.4, pp.2332-2336, Elsevier, December 2015, 10.1016/j.matpr.2015.07.287 Article
B. B. Nayak, S. S. Mahapatra, S. Chatterjee, and K. Abhishek, "Parametric appraisal of wedm using harmony search algorithm", Materials Today: Proceedings, vol.2, no.4-5, pp.2562-2568, Elsevier, December 2015, 10.1016/j.matpr.2015.07.207 Article
D. K. Sen, S. Datta, and S. S. Mahapatra, "Extension of TODIM combined with grey numbers: an integrated decision making module", Grey Systems: Theory and Application, vol.5, no.3, pp.367-391, Emerald Group Publishing Limited, November 2015 Article
L. Das and S. S. Mahapatra, "Prediction of inverse kinematics of a 5-DOF pioneer robotic arm having 6-DOF end-effector using ANFIS", International Journal of Computational Vision and Robotics, vol.5, no.4, pp.365-384, Inderscience, October 2015, 10.1504/IJCVR.2015.072190 Article
R. Santuka, S. S. Mahapatra, P. R. Dhal, and A. Mishra, "An improved particle swarm optimization approach for solving machine loading problem in flexible manufacturing system", Journal of Advanced Manufacturing Systems, vol.14, no.3, pp.167-187, World Scientific, September 2015, 10.1142/S0219686715500110 Article
A. Garg, V. Vijayaraghavan, Ch. Wong, K. Tai, K. Sumithra, S. S. Mahapatra, P. M. Singru, and L. Yao, "Application of artificial intelligence technique for modelling elastic properties of 2D nanoscale material", Molecular Simulation, vol.41, no.14, pp.1143-1152, Taylor & Francis, September 2015, 10.1080/08927022.2014.951351 Article
C. R. Matawale, S. Datta, and S. S. Mahapatra, "Leanness metric evaluation platform in fuzzy context", Journal of Modelling in Management, vol.10, no.2, pp.238-267, Emerald, July 2015, 10.1108/JM2-10-2013-0057 Article
B. R. Debata, S. S. Mahapatra, and B. Patnaik, "Medical tourism service quality: an Indian perspective", New Business Opportunities in the Growing E-Tourism Industry, IGI Global, July 2015, 10.4018/978-1-4666-9466-8.ch063 Article
. Sreekumar, S. Mohapatra, and S. S. Mahapatra, "Service quality of Indian banks: a fuzzy inference system approach", Asian Academy of Management Journal, vol.20, no.2, pp.59-80, Asian Academy of Management, July 2015 Article
S. Mandal, S. S. Mahapatra, and Raj. K. Patel, "Enhanced removal of Cr(VI) by cerium oxide polyaniline composite: Optimization and modeling approach using response surface methodology and artificial neural networks", Journal of Environmental Chemical Engineering, vol.3, no.2, pp.870-885, Elsevier, June 2015, 10.1016/j.jece.2015.03.028 Article
R. K. Verma, K. Abhishek, S. Datta, and S. S. Mahapatra, "Multi-response optimization in machining of GFRP (Epoxy) composites: an integrated approach", Journal for Manufacturing Science and Production, vol.15, no.3, pp.267-292, DE GRUYTER, June 2015, 10.1515/jmsp-2014-0054 Article
V. Vijayaraghavan, A. Garg, J. L. Lam, B. N. Panda, and S. S. Mahapatra, "Process characterisation of 3D-printed FDM components using improved evolutionary computational approach", The International Journal of Advanced Manufacturing Technology, vol.78, no.5, pp.781–793, Springer, May 2015, 10.1007/s00170-014-6679-5 Article
S. Mandal, S. S. Mahapatra, and Raj. K. Patel, "Neuro fuzzy approach for arsenic (III) and chromium (VI) removal from water", Journal of Water Process Engineering, vol.5, pp.58-75, Elsevier, April 2015, 10.1016/j.jwpe.2015.01.002 Article
S. Jaipuria and S. S. Mahapatra, "Performance improvement of manufacturing supply chain using back-up supply strategy", Benchmarking: An International Journal, vol.22, no.3, pp.446-464, Emerald, April 2015, 10.1108/BIJ-09-2013-0089 Article
R. K. Yadav, K. Abhishek, and S. S. Mahapatra, "A simulation approach for estimating flank wear and material removal rate in turning of Inconel 718", Simulation Modelling Practice and Theory, vol.52, pp.1-14, Elsevier, March 2015, 10.1016/j.simpat.2014.12.004 Article
A. K. Mehar, S. S. Mahapatra, and S. K. Patel, "Assessment of mechanical properties and wear behaviour of ceramic composites", International Journal of Engineering Technology, Management and Applied Sciences, vol.3, pp.1-11, IJETMAS, March 2015 Article
S. Mandal, S. S. Mahapatra, A. Adhikari, and Raj. K. Patel, "Modeling of arsenic (III) removal by evolutionary genetic programming and least square support vector machine models", Environmental Processes, vol.2, no.1, pp.145-172, Springer, March 2015, 10.1007/s40710-014-0050-6 Article
S. K. Sahoo, S. Datta, and S. S. Mahapatra, "Appraisement and benchmarking of supply chain performance extent: a fuzzy grey relation method", Grey Systems: Theory and Application, vol.5, no.1, pp.2-30, February 2015, 10.1108/GS-10-2014-0036 Article
B. R. Debata, B. Patnaik, S. S. Mahapatra, and K. Sree, "Interrelations of service quality and service loyalty dimensions in medical tourism: a structural equation modelling approach", Benchmarking: An International Journal, vol.22, no.1, pp.18-55, Emerald Group Publishing Limited, February 2015 Article
K. Abhishek, V. R. Kumar, S. Datta, and S. S. Mahapatra, "Parametric appraisal and optimization in machining of CFRP composites by using TLBO (teaching–learning based optimization algorithm)", Journal of Intelligent Manufacturing, pp.1-17, Springer, February 2015, 10.1007/s10845-015-1050-8 Article
S. Mandal, S. S. Mahapatra, M. K. Sahu, and Raj. K. Patel, "Artificial neural network modelling of As(III) removal from water by novel hybrid material", Process Safety and Environmental Protection, vol.93, pp.249–264, Elsevier, January 2015, 10.1016/j.psep.2014.02.016 Article
A. Garg, V. Vijayaraghavan, C., K. Tai, P. Singru, S. S. Mahapatra, and K. S. Sangwan, "Investigation of mechanical strength of 2D nanoscale structures using a molecular dynamics based computational intelligence approach", International Journal of Modern Physics B, vol.29, no.1, World Scientific Publishing, January 2015, 10.1142/S0217979214502427 Article
J. Sahu, S. S. Mahapatra, and C. P. Mohanty, "Multi-response optimisation of EDM parameters using data envelopment analysis", International Journal of Productivity and Quality Management, vol.15, no.3, pp.309-334, Inderscience Publishers, January 2015, 10.1504/IJPQM.2015.068472 Article
K. Abhishek, S. Datta, and S. S. Mahapatra, "Optimization of thrust, torque, entry, and exist delamination factor during drilling of CFRP composites", The International Journal of Advanced Manufacturing Technology, vol.76, no.1, pp.401-416, Springer, January 2015, 10.1007/s00170-014-6199-3 Article
C. P. Mohanty, S. S. Mahapatra, and J. Sahu, "A thermal-structural model for process performance analysis", International Journal of Productivity and Quality Management, vol.16, no.3, pp.347-371, Inderscience, December 2015, 10.1504/IJPQM.2015.071519 Article
S. Mishra, A. Sahu, S. Datta, and S. S. Mahapatra, "Application of fuzzy integrated MULTIMOORA method towards supplier/partner selection in agile supply chain", International Journal of Operational Research, vol.22, no.4, pp.466-514, Inderscience, December 2015, 10.1504/IJOR.2015.068562 Article
C. Matawale, S. Datta, and S. S. Mahapatra, "Evaluation of leanness, agility and leagility for supply chain of automotive industries", International Journal of Agile Systems and Management, vol.8, no.2, pp.85-115, Inderscience, December 2015, 10.1504/IJASM.2015.070603 Article
N. Sahu, S. Datta, and S. S. Mahapatra, "Fuzzy based appraisement module for 3PL evaluation and selection", Benchmarking: An International Journal, vol.22, no.3, pp.354-392, Emerald, December 2015, 10.1108/BIJ-01-2013-0002 Article
C. Samantra, S. Datta, S. Mishra, and S. S. Mahapatra, "Fuzzy evaluation modelling to assess organisational agility", International Journal of Industrial and Systems Engineering, vol.21, no.1, pp.50-67, Inderscience Enterprises, December 2015, 10.1504/IJISE.2015.070874 Article
A. Sahu, S. Datta, and S. S. Mahapatra, "GDMP for CNC machine tool selection with a compromise ranking method using generalised fuzzy circumstances", International Journal of Computer Aided Engineering and Technology, vol.7, no.1, pp.92-108, Inderscience, December 2015, 10.1504/IJCAET.2015.066172 Article
A. Sahu, S. Datta, and S. S. Mahapatra, "Green supply chain performance appraisement and benchmarking using fuzzy grey relation method", International Journal of Business Information Systems, vol.20, no.2, pp.157-194, Inderscience, December 2015, 10.1504/IJBIS.2015.071533 Article
D. Sen, S. Datta, S. K. Patel, and S. S. Mahapatra, "Multi-criteria decision making towards selection of industrial robot: Exploration of PROMETHEE II method", Benchmarking: An International Journal, vol.22, no.3, pp.465-487, Emerald, December 2015, 10.1108/BIJ-05-2014-0046 Article
S. Nigam, S. K. Patel, S. S. Mahapatra, N. Sharma, and K. S. Ghosh, "Nickel coating on high strength low alloy steel by pulse current deposition", IOP Conference Series: Materials Science and Engineering, vol.75, no.1, pp.012024, IOP, December 2015 Article
A. K. Sahu, S. K. Sahu, S. Datta, and S. S. Mahapatra, "Supply chain flexibility assessment and decision-making: A fuzzy intelligent approach", International Journal of Business Excellence, vol.8, no.6, pp.675-699, Inderscience Publishers, December 2015, 10.1504/IJBEX.2015.072305 Article
P. P. Mohanty and S. S. Mahapatra, "A compromise solution by VIKOR method for ergonomically designed product with optimal set of design characteristics", Procedia Materials Science, vol.6, pp.633-640, Elsevier, December 2014, 10.1016/j.mspro.2014.07.078 Article
K. Abhishek, S. Chatterjee, R. K. Yadav, R. K. Verma, S. Datta, S. S. Mahapatra, and P. K. Pal, "A fuzzy-ica based hybrid approach for parametric appraisal in machining (turning) of gfrp composites", International Journal of Basic and Applied Science Research (IJBASR), vol.1, no.1, pp.15-19, Krishi Sanskriti Publications, December 2014 Article
B. Nayak and S. S. Mahapatra, "A neuro-fuzzy approach for optimization of multiple responses in taper cutting using wire electrical discharge machining", AIMTDR, pp.180-1-6, AIMTDR, December 2014 Article
C. P. Mohanty, S. S. Mahapatra, and M. R. Singh, "A particle swarm approach for multi-objective optimization of electrical discharge machining process", Journal of Intelligent Manufacturing, vol.27, no.6, pp.1171–1190, Springer, December 2014, 10.1007/s10845-014-0942-3 Article
B. Nayak and S. S. Mahapatra, "A utility concept approach for multi-objective optimization of taper cutting operation using WEDM", Procedia Engineering, vol.97, pp.469-478, Elsevier, December 2014, 10.1016/j.proeng.2014.12.271 Article
K. Abhishek, B. N. Panda, S. Datta, and S. S. Mahapatra, "Comparing predictability of genetic programming and ANFIS on drilling performance modeling for GFRP composites", Procedia Materials Science, vol.6, pp.544-550, Elsevier, December 2014, 10.1016/j.mspro.2014.07.069 Article
V. Sonkar, K. Abhishek, S. Datta, and S. S. Mahapatra, "Multi-objective optimization in drilling of GFRP composites: a degree of similarity approach", Procedia Materials Science, vol.6, pp.538-543, Elsevier, December 2014, 10.1016/j.mspro.2014.07.068 Article
S. Chatterjee, K. Abhishek, S. S. Mahapatra, S. Datta, and R. Yadav, "NSGA-II approach of optimization to study the effects of drilling parameters in AISI-304 stainless steel", Procedia Engineering, vol.97, pp.78-84, Elsevier, December 2014, 10.1016/j.proeng.2014.12.227 Article
V. Vijayaraghavan, A. Garg, Ch. Wong, K. Tai, K. Sumithra, P. M. Singru, L. Gao, and S. S. Mahapatra, "On the study of machining characteristics of 2-D nanoscale material", Nanoscience and Nanotechnology Letters, vol.6, no.12, pp.1079-1086, American Scientific Publishers, December 2014, 10.1166/nnl.2014.1894 Article
K. Abhishek, S. Datta, and S. S. Mahapatra, "Multi-response optimization in drilling of composites: introduction of a similarity based approach in combination with taguchi's philosophy", Journal for Manufacturing Science and Production, vol.14, no.3, pp.151-170, Degruyter, November 2014, 10.1515/jmsp-2014-0025 Article
L. Das, J. Nanda, and S. S. Mahapatra, "A comparative study of prediction of inverse kinematics solution of 2-DOF, 3-DOF and 5-DOF redundant manipulators by ANFIS", International Journal of Computer Science and Network, vol.3, no.5, pp.304-308, IJCSN, October 2014 Article
C. Matawale, S. Datta, and S. S. Mahapatra, "Lean metric appraisement: exploration of grey numbers set theory", Grey Systems: Theory and Application, vol.4, no.3, pp.400-425, Emerald, October 2014, 10.1108/GS-03-2014-0008 Article
K. Abhishek, V. Sonkar, S. Datta, and S. S. Mahapatra, "Optimization in drilling of MMC composites: A case research", Journal of Basic and Applied Engineering Research, vol.1, no.2, pp.79-83, Krishi Sanskriti Publications, October 2014 Article
S. Mishra, S. S. Mahapatra, and S. Datta, "Agility evaluation in fuzzy context: influence of decision-makers’ risk bearing attitude", Benchmarking: An International Journal, vol.21, no.6, pp.1084-1119, Emerald Group Publishing, September 2014, 10.1108/BIJ-04-2012-0026 Article
C. R. Matawale, S. Panigrahi, S. K. Sahu, S. Datta, and S. S. Mahapatra, "Fuzzy-TOPSIS for Appropriate Site Selection for Establishing a Thermal Power Plant", in Applied Mechanics and Materials, vol.619, pp.385–389, Trans Tech Publications, Ltd., August 2014, doi.org/10.4028/www.scientific.net/AMM.619.385 Inproceedings
K. Abhishek, S. Datta, S. Chatterjee, and S. S. Mahapatra, "Parametric optimization in turning of CFRP (epoxy) composites: a case experimental research with exploration of HS algorithm", Applied Mechanics and Materials, vol.619, pp.54-57, Trans Tech Publications, August 2014, 10.4028/www.scientific.net/AMM.619.54 Article
P. Mohanty and S. S. Mahapatra, "A finite element approach for analyzing the effect of cushion type and thickness on pressure ulcer", International Journal of Industrial Ergonomics, vol.44, no.4, pp.499-509, Elsevier, July 2014, 10.1016/j.ergon.2014.03.003 Article
S. Satapathy, S. S. Mahapatra, S. K. Patel, A. Biswas, and P. D. Mishra, "Service satisfaction in E_Electricity service in Odisha (a state of India) by structural equation modeling", Benchmarking: An International Journal, vol.21, no.4, pp.634-650, Emerald Group Publishing Limited, July 2014, 10.1108/BIJ-07-2012-0049 Article
C. Samantra, S. Datta, and S. S. Mahapatra, "Risk assessment in IT outsourcing using fuzzy decision-making approach: an Indian perspective", Expert Systems with Applications, vol.41, no.8, pp.4010-4022, Elsevier, June 2014, 10.1016/j.eswa.2013.12.024 Article
S. Jaipuria and S. S. Mahapatra, "An improved demand forecasting method to reduce bullwhip effect in supply chains", Expert Systems with Applications, vol.41, no.5, pp.2395-2408, Pergamon, April 2014, 10.1016/j.eswa.2013.09.038 Article
N. Sahu, S. Datta, and S. S. Mahapatra, "Green supplier appraisement in fuzzy environment", Benchmarking: An International Journal, vol.21, no.3, pp.412-429, Emerald Group Publishing, April 2014, 10.1108/BIJ-06-2012-0042 Article
V. Vijayaraghavan, A. Garg, Ch. Wong, K. Tai, and S. S. Mahapatra, "Measurement of properties of graphene sheets subjected to drilling operation using computer simulation", Measurement, vol.50, pp.50-62, Elsevier, April 2014, 10.1016/j.measurement.2013.12.028 Article
A. Garg, V. Vijayaraghavan, S. S. Mahapatra, K. Tai, and C. Wong, "Performance evaluation of microbial fuel cell by artificial intelligence methods", Expert Systems with Applications, vol.41, no.4, pp.1389-1399, Elsevier, March 2014, 10.1016/j.eswa.2013.08.038 Article
S. Mishra, C. Samantra, S. Datta, and S. S. Mahapatra, "Agility appraisement framework for integrated supply chain using generalised interval-valued fuzzy set", International Journal of Business Information Systems, vol.16, no.1, pp.89-118, Inderscience Publishers, January 2014, 10.1504/IJBIS.2014.060838 Article
S. Mishra, S. Datta, S. S. Mahapatra, and B. R. Debata, "Alignment of dimensions towards modelling organisational supply chain agility", International Journal of Services and Operations Management, vol.17, no.1, pp.88-106, Inderscience Publishers, January 2014, 10.1504/IJSOM.2014.057997 Article
P. Mohanty and S. S. Mahapatra, "An integrated approach for designing office chair with ergonomic consideration", International Journal of Services and Operations Management, vol.17, no.2, pp.194-220, Inderscience Publishers Ltd, January 2014, 10.1504/IJSOM.2014.058843 Article
S. Datta, R. K. Sahu, S. S. Mahapatra, A. Biswas, and G. Majumdar, "Optimisation of percent dilution and HAZ width of submerged arc weldment using Taguchi philosophy coupled with fuzzy inference system", International Journal of Productivity and Quality Management, vol.13, no.4, pp.430-449, Inderscience Publishers, January 2014, 10.1504/IJPQM.2014.062221 Article
A. K. Sahu, S. Datta, and S. S. Mahapatra, "Use of IVFNs and MULTIMOORA method for supply chain performance measurement, benchmarking and decision-making: an empirical study", International Journal of Business Excellence, vol.7, no.2, pp.237-280, Inderscience Publishers, January 2014, 10.1504/IJBEX.2014.059572 Article
B. B. Nayak and S. S. Mahapatra, "A hybrid approach for process optimization in taper cutting operation using wire electrical discharge machining", Applied Mechanics and Materials, vol.619, pp.83-88, Trans Tech Publications, December 2014, 10.4028/www.scientific.net/AMM.619.83 Article
C. Matawale, S. Panigrahi, S. Sahu, S. Datta, and S. S. Mahapatra, "Fuzzy-TOPSIS for appropriate site selection for establishing a thermal power plant", Applied Mechanics and Materials, vol.619, pp.385-389, Trans Tech Publications, December 2014, 10.4028/www.scientific.net/AMM.619.385 Article
S. B. Mishra and S. S. Mahapatra, "Improvement in tensile strength of FDM built parts by parametric control", in Applied Mechanics and Materials:Dynamics of Machines and Mechanisms, Industrial Research, vol.592-594, pp.1075-1079, Trans Tech Publications, December 2014, 10.4028/www.scientific.net/AMM.592-594.1075 Inproceedings
C. R. Matawale, S. Datta, and S. S. Mahapatra, "Leanness estimation procedural hierarchy using interval-valued fuzzy sets (IVFS)", Benchmarking, vol.21, no.2, pp.150-183, Emerald, December 2014, 10.1108/BIJ-03-2012-0020 Article
A. K. Sahu, S. Datta, and S. S. Mahapatra, "Supply chain performance benchmarking using grey-MOORA approach: An empirical research", Grey Systems: Theory and Application, vol.4, no.1, pp.24-55, Emerald Group Publishing Limited, December 2014, 10.1108/GS-07-2013-0011 Article
S. Satapathy, S. S. Mahapatra, S. K. Patel, A. Biswas, and P. Mishra, "Service satisfaction in E_electricity service in Odisha (a state of India) by structural equation modeling", Benchmarking: An International Journal, vol.21, no.4, pp.634-650, Emerald 2014, 10.1108/BIJ-07-2012-0049 Article
J. Sahu, C. P. Mohanty, and S. S. Mahapatra, "A DEA approach for optimization of multiple responses in electrical discharge machining of AISI D2 steel", Procedia Engineering, vol.51, pp.585-591, Elsevier, December 2013, 10.1016/j.proeng.2013.01.083 Article
S. Datta, C. Samantra, S. S. Mahapatra, G. Mandal, and G. Majumdar, "Appraisement and selection of third party logistics service providers in fuzzy environment", Benchmarking: An International Journal, vol.20, no.4, pp.537-548, Emerald, December 2013, 10.1108/BIJ-11-2011-0087 Article
C. P. Mohanty, J. Sahu, and S. S. Mahapatra, "Thermal-structural analysis of electrical discharge machining process", Procedia Engineering, vol.51, pp.508-513, Elsevier, December 2013, 10.1016/j.proeng.2013.01.072 Article
D. Puhan, S. S. Mahapatra, J. Sahu, and L. Das, "A hybrid approach for multi-response optimization of non-conventional machining on AlSiC p MMC", Measurement, vol.46, no.9, pp.3581-3592, Academic Journals, November 2013, 10.1016/j.measurement.2013.06.007 Article
S. K. Sahoo, S. Datta, S. K. Patel, and S. S. Mahapatra, "Industrial supply chain performance benchmarking using fuzzy grey relation method", Global Journal of Management and Business Studies, vol.3, no.7, pp.775-784, Research India Publications, November 2013 Article
B. R. Debata, K. Sree, B. Patnaik, and S. S. Mahapatra, "Evaluating medical tourism enablers with interpretive structural modeling", Benchmarking: An International Journal, vol.20, no.6, pp.716-743, Emerald Group Publishing, October 2013, 10.1108/BIJ-10-2011-0079 Article
C. Samantra, S. Datta, S. Mishra, and S. S. Mahapatra, "Agility appraisal for integrated supply chain using generalized trapezoidal fuzzy numbers set", The International Journal of Advanced Manufacturing Technology, vol.68, no.5, pp.1491-1503, Springer, September 2013, 10.1007/s00170-013-4937-6 Article
S. Datta, N. K. Sahu, and S. S. Mahapatra, "Robot selection based on grey-MULTIMOORA approach", Grey Systems: Theory and Application, vol.3, no.2, pp.201-232, Emerald Group Publishing, August 2013, 10.1108/GS-05-2013-0008 Article
A. Kumar, S. Datta, S. S. Mahapatra, G. Mandal, and G. Majumdar, "Taguchi approach followed by fuzzy linguistic reasoning for quality-productivity optimization in machining operation", Journal of Manufacturing Technology Management, vol.24, no.6, pp.929 - 951, Emerald, August 2013, 10.1108/JMTM-02-2012-0014 Article
S. Mishra, S. Datta, and S. S. Mahapatra, "Grey-based and fuzzy TOPSIS decision-making approach for agility evaluation of mass customization systems", Benchmarking: An International Journal, vol.20, no.4, pp.440-462, Emerald, July 2013, 10.1108/BIJ-07-2011-0050 Article
C. R. Matawale, S. Datta, and S. S. Mahapatra, "Development of a decision support system for leagility assessment in fuzzy environment", in Asia-Pacific International Congress on Engineering and Natural Sciences (APICENS 2013), pp.1-8, April 2013 Inproceedings
H. B. Sahu and S. S. Mahapatra, "Forecasting spontaneous heating susceptibility of Indian coals using neuro fuzzy system", Geotechnical and Geological Engineering, vol.31, no.2, pp.683-697, Springer, April 2013, 10.1007/s10706-013-9618-6 Article
S. Mishra, S. Datta, and S. S. Mahapatra, "Agility evaluation and identification of agile obstacles by exploring fuzzy degree of similarity (DOS) concept", in Proceeding of International congress on “Innovative Trends in Information Technologies and Computing Sciences for Competitive World Order” (ITITCSCWO – 2013) “Krishi Sanskriti”, pp.1-4, New Delhi, India, March 2013 Inproceedings
B. Patnaik, G. S. Beriha, S. S. Mahapatra, and N. Singh, "Organizational learning in educational settings (technical): an Indian perspective", The Learning Organization, vol.20, no.2, pp.153-172, Emerald, March 2013, 10.1108/09696471311303782 Article
A. Singh, S. Datta, S. S. Mahapatra, T. Singha, and G. Majumdar, "Optimization of bead geometry of submerged arc weld using fuzzy based desirability function approach", Journal of Intelligent Manufacturing, vol.24, no.1, pp.35-44, springer, February 2013, 10.1007/s10845-011-0535-3 Article
C. R. Matawale, S. Datta, and S. S. Mahapatra, "Agility appraisement and identification of agile barriers in a supply chain", International Journal of Services and Operations Management, vol.16, no.4, pp.478-505, Inderscience, January 2013, 10.1504/IJSOM.2013.057510 Article
S. S. Mahapatra and B. N. Panda, "Benchmarking of rapid prototyping systems using grey relational analysis", International Journal of Services and Operations Management, vol.16, no.4, pp.460-477, Inderscience, January 2013, 10.1504/IJSOM.2013.057509 Article
N. K. Sahu, S. Datta, and S. S. Mahapatra, "Decision making for selecting 3PL service provider using three parameter interval grey numbers", International Journal of Logistics Systems and Management, vol.14, no.3, pp.261-297, Inderscience, January 2013, 10.1504/IJLSM.2013.052061 Article
C. Samantra, N. K. Sahu, S. Datta, and S. S. Mahapatra, "Decision-making in selecting reverse logistics alternative using interval-valued fuzzy sets combined with VIKOR approach", International Journal of Services and Operations Management, vol.14, no.2, pp.175-196, Inderscience Publishers, January 2013, 10.1504/IJSOM.2013.051828 Article
B. R. Debata, B. Patnaik, S. S. Mahapatra, and S. Sreekumar, "Efficiency measurement amongst medical tourism service providers in India", International Journal for Responsible Tourism, vol.2, no.1, pp.24-31, Amphitheatre Foundation, January 2013 Article
A. K. Sahu, S. Datta, and S. S. Mahapatra, "Green supply chain performance benchmarking using integrated IVFN-TOPSIS methodology", International Journal of Process Management and Benchmarking, vol.3, no.4, pp.511-551, Inderscience Publishers, January 2013, 10.1504/IJPMB.2013.058272 Article
S. Mishra, S. Datta, and S. S. Mahapatra, "Implementing agility appraisement module in fuzzy context: an Indian perspective", International Journal of Logistics Systems and Management, vol.14, no.3, pp.353-386, Inderscience Publishers, January 2013, 10.1504/IJLSM.2013.052065 Article
C. R. Matawale, S. Datta, and S. S. Mahapatra, "Interrelationship of capabilities/enablers for lean, agile and leagile manufacturing: an ISM approach", International Journal of Process Management and Benchmarking, vol.3, no.3, pp.290-313, Inderscience Publishers, January 2013, 10.1504/IJPMB.2013.058157 Article
J. Sahu, S. S. Mahapatra, and D. Puhan, "Multi-response optimisation of electrical discharge machining process using combined approach of RSM and FIS", International Journal of Productivity and Quality Management, vol.12, no.2, pp.185-208, Inderscience Publishers, January 2013, 10.1504/IJPQM.2013.055552 Article
A. Singh, S. Datta, and S. S. Mahapatra, "Principal component analysis and fuzzy embedded Taguchi approach for multi-response optimisation in machining of GFRP polyester composites: a case study", International Journal of Industrial and Systems Engineering, vol.14, no.2, pp.175-206, Inderscience Publishers, January 2013, 10.1504/IJISE.2013.053736 Article
S. Mishra, C. Samantra, S. Datta, and S. S. Mahapatra, "Supplier evaluation in agile supply chain in fuzzy paradigm", International Journal of Services and Operations Management, vol.16, no.1, pp.1-41, Inderscience, January 2013, 10.1504/IJSOM.2013.055556 Article
S. K. Sahu, S. Datta, S. K. Patel, and S. S. Mahapatra, "Supply chain performance appraisement, benchmarking and decision-making: empirical study using grey theory and grey-MOORA", International Journal of Process Management and Benchmarking, vol.3, no.3, pp.233-289, Inderscience, January 2013, 10.1504/IJPMB.2013.058155 Article
A. Singh, S. Datta, and S. S. Mahapatra, "Application of a fuzzy inference system for the optimization of material removal rate and multiple surface roughness characteristics in the machining of GFRP polyester composites", Decision Making in Manufacturing and Services, vol.7, no.1-2, pp.19-42, BazTech, December 2013 Article
S. Satapathy, S. S. Mahapatra, S. K. Patel, and P. Mishra, "Analysis of e-service of electricity utility provider: an Indian perspective", International Journal of Logistics Systems and Management (IJLSM), vol.15, no.1, pp.18-31, Inderscience 2013, 10.1504/IJLSM.2013.053236 Article
S. Satapathy, S. K. Patel, S. S. Mahapatra, and P. Mishra, "Evaluation of service quality of electricity sector by ANN method and sector wise analysis by linear discriminate analysis (LDA)", International Journal of Procurement Management, vol.6, no.3, pp.350-377, Inderscience 2013, 10.1504/IJPM.2013.053653 Article
S. K. Sahu, S. Datta, S. K. Patel, and S. S. Mahapatra, "Supply chain performance appraisement, benchmarking and decision-making: Empirical study using grey theory and grey-MOORA", International Journal of Process Management and Benchmarking, vol.3, no.3, pp.233-289, Inderscience 2013, 10.1504/IJPMB.2013.058155 Article
H. B. Sahu, S. S. Mahapatra, and D. C. Panigrahi, "Fuzzy c-means clustering approach for classification of Indian coal seams with respect to their spontaneous combustion susceptibility", Fuel processing technology, vol.104, pp.115–120, Elsevier, December 2012, 10.1016/j.fuproc.2012.03.017 Article
N. K. Sahu, S. Datta, and S. S. Mahapatra, "Establishing green supplier appraisement platform using grey concepts", Grey Systems: Theory and Application, vol.2, no.3, pp.395-418, Emerald, October 2012, 10.1108/20439371211273276 Article
A. K. Sood, R. K. Odhar, and S. S. Mahapatra, "Improving dimensional accuracy of Fused Deposition Modelling processed part using grey Taguchi method", Materials & Design, vol.30, no.10, pp.4243-4252, Elsevier, September 2012, 10.1016/j.matdes.2009.04.030 Article
S. S. Mahapatra and A. K. Sood, "Bayesian regularization-based Levenberg–Marquardt neural model combined with BFOA for improving surface finish of FDM processed part", The International Journal of Advanced Manufacturing Technology, vol.60, no.9-12, pp.1223-1235, Springer, June 2012, 10.1007/s00170-011-3675-x Article
C. Samantra, S. Datta, and S. S. Mahapatra, "Application of fuzzy based VIKOR approach for multi-attribute group decision making (MAGDM): A case study in supplier selection", Decision Making in Manufacturing and Services, vol.6, no.1, pp.25-39, AGH University of Science and Technology Press, May 2012, 10.7494/dmms.2012.6.1.25 Article
S. Padhi, N. Nayak, S. K. Panda, P. R. Dhal, and S. S. Mahapatra, "Multi-objective parametric optimization of powder mixed electro-discharge machining using response surface methodology and non-dominated sorting genetic algorithm", Sadhana, vol.37, no.2, pp.223-240, Springer, May 2012, 10.1007/s12046-012-0078-0 Article
G. S. Beria, B. Patnaik, S. S. Mahapatra, and S. Padhee, "Assessment of safety performance in Indian industries using fuzzy approach", Expert Systems with Applications, vol.39, no.3, pp.3311-3323, Elsevier, February 2012, 10.1016/j.eswa.2011.09.018 Article
H. Dalai, S. Dewangan, S. Datta, S. K. Patel, and S. S. Mahapatra, "A case study on quality and productivity optimization in electric discharge machining (EDM)", Advanced Materials Research, vol.445, pp.27-32, Trans Tech Publications, January 2012, 10.4028/www.scientific.net/AMR.445.27 Article
B. R. Debata, B. Patnaik, S. S. Mahapatra, and . Sreekumar, "An integrated approach for service quality improvement in medical tourism: an Indian perspective", International Journal of Services and Operations Management, vol.13, no.1, pp.119-145, Inderscience Publishers, January 2012, 10.1504/IJSOM.2012.048278 Article
B. B. Nayak and S. S. Mahapatra, "An intelligent approach for prediction of angular error in taper cutting using wire EDM", Journal of Mechatronics and Intelligent Manufacturing, vol.3, no.1-2, Nova Science, January 2012 Article
S. K. Sharma, S. S. Mahapatra, B. N. Panda, and S. Sahu, "An interpretive structural modeling approach for analysis of interactions among the barriers in reverse logistics", Applied Mechanics and Materials, vol.110-116, pp.2699-2707, Trans Tech Publications, January 2012, 10.4028/www.scientific.net/AMM.110-116.2699 Article
A. K. Sood, R. Ohdar, and S. S. Mahapatra, "Experimental investigation and empirical modelling of FDM process for compressive strength improvement", Journal of Advanced Research, vol.30, no.1, pp.81-90, Elsevier, January 2012, 10.1016/j.jare.2011.05.001 Article
A. K. Sood, R. Ohdar, and S. S. Mahapatra, "Experimental investigation on wear of FDM processed part", Advanced Materials Research, vol.445, pp.883-888, Trans Tech Publications, January 2012, 10.4028/www.scientific.net/AMR.445.883 Article
S. Datta, C. Samantra, S. S. Mahapatra, S. Banerjee, and A. Bandyopadhyay, "Green supplier evaluation and selection using VIKOR method embedded in fuzzy expert system with interval-valued fuzzy numbers", International Journal of Procurement Management, vol.5, no.5, pp.647-678, Inderscience Publishers, January 2012, 10.1504/IJPM.2012.048880 Article
S. Mishra, S. Datta, and S. S. Mahapatra, "Interrelationship of drivers for agile manufacturing: an Indian experience", International Journal of Services and Operations Management, vol.11, no.1, pp.35-48, Inderscience Publishers, January 2012, 10.1504/IJSOM.2012.044798 Article
S. Mishra, C. Samantra, S. Datta, and S. S. Mahapatra, "Multi-attribute group decision-making (MAGDM) for supplier selection using fuzzy linguistic modelling integrated with VIKOR method", International Journal of Services and Operations Management, vol.12, no.1, pp.67-89, Inderscience Publishers, January 2012, 10.1504/IJSOM.2012.046674 Article
S. S. Mahapatra and S. Datta, "Study of wear assessment and optimization of multiple properties of red mud filled polyester composites", Applied Mechanics and Materials, vol.110-116, pp.1213-1220, Trans Tech Publications, January 2012, 10.4028/www.scientific.net/AMM.110-116.1213 Article
S. Sreedharan, W. Ongsakul, Jai. G. Singh, and S. S. Mahapatra, "Development of PSO-based robust controller for maximising wind penetration", International Journal of Renewable Energy Technology, vol.3, no.1, pp.58-78, Inderscience Publishers, December 2011, 10.1504/IJRET.2012.043909 Article
A. K. Sood, V. Chaturvedi, S. Datta, and S. S. Mahapatra, "Optimization of process parameters in fused deposition modeling using weighted principal component analysis", Journal of Advanced Manufacturing Systems, vol.10, no.2, pp.241-259, World Scientific Publishing Company, December 2011, 10.1142/S0219686711002181 Article
S. Satapathy, S. K. Patel, S. S. Mahapatra, G. S. Beriha, and A. Biswas, "Service quality evaluation in electricity utility industry: an empirical study in India", International Journal of Indian Culture and Business Management, vol.5, no.1, pp.59-75, Inderscience Publishers, December 2011, 10.1504/IJICBM.2012.044018 Article
S. S. Mahapatra and S. Datta, "A grey-based Taguchi method for wear assesment of red mud filled polyester composites", International Journal of Modeling and Optimization, vol.1, no.1, pp.80-88, IACSIT Press, April 2011, 10.7763/IJMO.2011.V1.15 Article
G. S. Beriha, B. Patnaik, and S. S. Mahapatra, "Safety performance evaluation of Indian organizations using data envelopment analysis", Benchmarking: An International Journal, vol.18, no.2, pp.197-220, Emerald, April 2011, 10.1108/14635771111121676 Article
H. B. Sahu, S. S. Mahapatra, K. Sirikasemsuk, and D. Panigrahi, "A discrete particle swarm optimization approach for classification of Indian coal seams with respect to their spontaneous combustion susceptibility", Fuel Processing Technology, vol.92, no.3, pp.479-485, Elsevier, March 2011, 10.1016/j.fuproc.2010.10.015 Article
H. B. Sahu, S. Padhee, and S. S. Mahapatra, "Prediction of spontaneous heating susceptibility of Indian coals using fuzzy logic and artificial neural network models", Expert Systems with Applications, vol.38, no.3, pp.2271–2282, Elsevier, March 2011, 10.1016/j.eswa.2010.08.015 Article
Gs. Beriha, B. Patnaik, S. S. Mahapatra, and . Sreekumar, "Occupational health and safety management using grey relational analysis: an Indian perspective", International Journal of Indian Culture and Business Management, vol.4, no.3, pp.298-324, Inderscience, January 2011, 10.1504/IJICBM.2011.040167 Article
S. Datta, S. S. Mahapatra, B. C. Routara, and A. Bandyopadhyay, "The fuzzy inference system approach to a multi-performance characteristic index for surface quality improvement in CNC end milling", International Journal of Experimental Design and Process Optimisation, vol.2, no.3, pp.265-282, Inderscience Publishers, January 2011, 10.1504/IJEDPO.2011.042747 Article
A. Singh, S. Datta, and S. S. Mahapatra, "Application of TOPSIS in the Taguchi method for optimal machining parameter selection", Journal for Manufacturing Science and Production, vol.11, no.1-3, pp.49-60, Degruyter, December 2011, 10.1515/jmsp.2011.002 Article
B. R. Debata, B. Patnaik, S. S. Mahapatra, and . Sreekumar, "Development of an instrument for measuring service quality of medical tourism in India", International Journal of Indian Culture and Business Management, vol.4, no.6, pp.589-608, Inderscience, December 2011, 10.1504/IJICBM.2011.042909 Article
A. K. Sood, S. S. Mahapatra, and R. K. Ohdar, "Weighted principal component approach for improving surface finish of ABS plastic parts built through fused deposition modelling process", International Journal of Rapid Manufacturing, vol.2, no.1-2, pp.4-27, Inderscience, December 2011, 10.1504/IJRapidM.2011.040687 Article
S. Datta and S. S. Mahapatra, "Use of desirability function and principal component analysis in Grey-Taguchi approach to solve correlated multi-response optimization in submerged arc welding", Journal of Advanced Manufacturing Systems, vol.9, no.2, pp.117-128, World Scientific, December 2010, 10.1142/S0219686710001843 Article
S. Datta, B. C. Routara, A. Bandyopadhyay, and S. S. Mahapatra, "Principal component analysis in grey based taguchi method for optimization of multiple surface quality characteristics of 6061-T4 aluminum in CNC end milling", Advances in materials and processing technologies, vol.1, pp.1-6, Taylor & Francis, October 2010 Article
P. R. Dhal, S. S. Mahapatra, S. Datta, and A. Mishra, "An improved artificial immune system for solving loading problems in flexible manufacturing systems", in 2010 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), pp.585-589, IEEE, Macao 2010, 10.1109/IEEM.2010.5674516 Inproceedings
S. Mahapatra, . Sreekumar, and S. S. Mahapatra, "Attribute selection in marketing: A rough set approach", IIMB Management Review, vol.22, no.1-2, pp.16-24, Elsevier 2010, 10.1016/j.iimb.2010.03.001 Article
B. C. Routara, S. D. Mohanty, S. Datta, A. Bandyopadhyay, and S. S. Mahapatra, "Combined quality loss (CQL) concept in WPCA-based Taguchi philosophy for optimization of multiple surface quality characteristics of UNS C34000 brass in cylindrical grinding", The International Journal of Advanced Manufacturing Technology, vol.51, no.1-4, pp.135-143, Springer 2010, 10.1007/s00170-010-2599-1 Article
S. Mahapatra and S. S. Mahapatra, "Customer experience management through emotional connection: an Indian perspective", International Journal of Indian Culture and Business Management, vol.3, no.3, pp.333-348, Inderscience Publishers 2010, 10.1504/IJICBM.2010.032392 Article
S. Datta, S. S. Mahapatra, and A. Bandyopadhyay, "Elimination of multi-response correlation while applying taguchi philosophy in optimization of submerged arc weld", in National Seminar on Joining Processes: Challenges for Quality, Design and Development, National Institute of Technology, Agartala, Agartala, Tripura 2010 Inproceedings
G. S. Beriha, B. Patnaik, and S. S. Mahapatra, "Measuring the perception of safety officers on occupational health in Indian industries", International Journal of Indian Culture and Business Management, vol.4, no.1, pp.30-47, Inderscience 2010, 10.1504/IJICBM.2011.037424 Article
S. Datta and S. S. Mahapatra, "Modeling, simulation and parametric optimization of wire EDM process using response surface methodology coupled with grey-Taguchi technique", International Journal of Engineering, Science and Technology, vol.2, no.5, pp.162-183, MultiCraft Publisher 2010, 10.4314/ijest.v2i5.60144 Article
S. Datta and S. S. Mahapatra, "Multi-criteria decision making approaches for service quality evaluation in technical education setting: Case study", Metamorphosis: A Journal of Management Research, vol.9, no.2, pp.55-68, Sage 2010, 10.1177/0972622520100206 Article
A. Majumdar, S. Datta, and S. S. Mahapatra, "Multicriteria decision-making models for the evaluation and appraisal of teachers' performance", International Journal of Productivity and Quality Management, vol.6, no.2, pp.213-230, Inderscience 2010, 10.1504/IJPQM.2010.034406 Article
S. Datta and S. S. Mahapatra, "Multi-objective optimization of submerged arc welding process", The Journal of Engineering Research, vol.7, no.1, pp.42-52, Sultan Qaboos University 2010, 10.24200/tjer.vol7iss1pp42-52 Article
B. C. Routara, S. D. Mohanty, S. Datta, A. Bandyopadhyay, and S. S. Mahapatra, "Optimization in CNC end milling of UNS C34000 medimum leaded brass with multiple surface roughnesses characteristics", Sadhana, vol.35, no.5, pp.619-629, Springer 2010, 10.1007/s12046-010-0041-x Article
A. K. Sood, R. K. Odhar, and S. S. Mahapatra, "Parametric appraisal of fused deposition modelling process using the grey Taguchi method", Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol.224, no.1, pp.135-145, Sage 2010, 10.1243/09544054JEM1565 Article
A. K. Sood, R. K. Odhar, and S. S. Mahapatra, "Parametric appraisal of mechanical property of fused deposition modelling processed parts", Materials & Design, vol.31, no.1, pp.287-295, Elsevier 2010, 10.1016/j.matdes.2009.06.016 Article
A. Equbal, A. K. Sood, V. Toppo, R. K. Ohdar, and S. S. Mahapatra, "Prediction and analysis of sliding wear performance of fused deposition modelling-processed ABS plastic parts", Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol.224, no.12, pp.1261-1271, Sage 2010, 10.1243/13506501JET835 Article
S. Datta and S. S. Mahapatra, "Simultaneous optimization of correlated multiple surface quality characteristics of mild steel turned product", Intelligent Information Management, vol.2, no.1, pp.26-39, Scientific Research Publishing 2010, 10.4236/iim.2010.21004 Article
. Sreekumar and S. S. Mahapatra, "Supplier selection in supply chain management: a fuzzy multi-criteria decision-making approach", International Journal of Services and Operations Management, vol.8, no.1, pp.108-126, Inderscience 2010, 10.1504/IJSOM.2011.037443 Article
S. S. Mahapatra and . Sreekumar, "A fuzzy multi-criteria decision making approach for supplier selection in supply chain management", African journal of business management, vol.3, no.4, pp.168-177, Academic Journals 2009 Article
H. B. Sahu, S. S. Mahapatra, and D. Panigrahi, "An empirical approach for classification of coal seams with respect to the spontaneous heating susceptibility of Indian coals", International Journal of Coal Geology, vol.80, no.3-4, pp.175-180, Elsevier 2009, 10.1016/j.coal.2009.10.001 Article
B. C. Routara, S. D. Mohanty, S. Datta, A. Bandyopadhyay, and S. S. Mahapatra, "Combined quality loss (CQL) concept in WPCA based taguchi philosophy for optimization of multiple surface quality characteristics of mild steel (AISI 1040) in cylindrical grinding", Journal for Manufacturing Science and Production, vol.10, no.3-4, pp.195-204, De Gruyter 2009, 10.1515/IJMSP.2009.10.3-4.195 Article
R. S. Pandian and S. S. Mahapatra, "Manufacturing cell formation with production data using neural networks", Computers & Industrial Engineering, vol.56, no.4, pp.1340-1347, Elsevier 2009, 10.1016/j.cie.2008.08.003 Article
S. S. Mahapatra and V. Chaturvedi, "Modelling and analysis of abrasive wear performance of composites using taguchi approach", International Journal of Engineering, Science and Technology, vol.1, no.1, pp.123-135, MultiCraft Publisher 2009, 10.4314/ijest.v1i1.58072 Article
S. K. Panda, S. Padhee, A. K. Sood, and S. S. Mahapatra, "Optimization of fused deposition modelling (FDM) process parameters using bacterial foraging technique", Intelligent information management, vol.1, no.2, pp.89-97, Scientific research 2009, 10.4236/iim.2009.12014 Article
R. Sudhakarapandian, S. Saravanasankar, S. S. Mahapatra, and S. G. Ponnambalam, "An ART1 based algorithm for cell formation with sequence data", in IEEE International Conference on Systems, Man and Cybernetics, 2008, IEEE, Singapore 2008, 10.1109/ICSMC.2008.4811561 Inproceedings
S. S. Mahapatra, S. Sahu, and R. Sudhakarpandian, "ART based cell formation using combined operation sequence and time", IEEE International Conference on Industrial Engineering and Engineering Management, vol.1, pp.1209-1213, IEEE Xplore 2008, 10.1109/IEEM.2008.4738062 Article
S. Ponnambalam, R. Sudhakarapandian, S. S. Mahapatra, and S. Saravanasankar, "Modified ART1 neural networks for cell formation using production data", IEEE International Conference on Automation Science and Engineering 2008, pp.603-608, IEEE Xplore 2008, 10.1109/COASE.2008.4626507 Article
M. S. Khan, S. S. Mahapatra, and . Sreekumar, "Service quality evaluation in internet banking: an empirical study in India", International Journal of Indian Culture and Business Management, vol.2, no.1, pp.30-46, Inderscience 2008, 10.1504/IJICBM.2009.021596 Article
M. Khan and S. S. Mahapatra, "Service quality evaluation of technical institutions using data envelopment analysis", International Journal of Productivity and Quality Management, vol.3, no.1, pp.127-143, Inderscience 2008, 10.1504/IJPQM.2008.01597 Article
M. Khan, S. S. Mahapatra, and . Sreekumar, "Evaluating service quality in technical institutes: a data envelopment analysis approach", Metamorphosis: A Journal of Management Research, vol.6, no.1, pp.40-53, Sage journals 2007, 10.1177/0972622520070105 Article
S. S. Mahapatra and A. Patnaik, "Optimization of wire electrical discharge machining (WEDM) process parameters using taguchi method", The International Journal of Advanced Manufacturing Technology, vol.34, no.9-10, pp.911-925, springer 2007, 10.1007/s00170-006-0672-6 Article
S. S. Mahapatra and A. Patnaik, "Parametric optimization of wire electrical discharge machining (WEDM) process using taguchi method", Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol.28, no.4, pp.422-429, SciELO 2006, 10.1590/S1678-58782006000400006 Article

 Courses Taught

  • MA653 : Statistical Analysis {Theory}
  • ME233 : Process Control and Assurance Science {Theory}
  • ME333 : Process Control and Assurance Science {Theory}
  • ME431 : Decision Modeling {Theory}
  • ME605 : Advanced Decision Modeling Technique {Theory}
  • ME606 : Neural Network and Artificial Intelligence {Theory}
  • ME6237 : Production Planning and Control {Theory}
  • ME6244 : Quality Engineering and Reliability {Theory}
  • ME637 : Production System and Computer Integrated Manufacturing {Theory}
  • ME641 : Production Planning and Control {Theory}
  • ME642 : Decision Models and Optimization {Theory}
  • ME648 : Quality Engineering and Reliability {Theory}
  • ME4272 : Industrial Engineering Project {Practical}
  • ME483 : Industrial Engineering Project {Practical}
  • ME776 : Soft Computing Laboratory - I {Practical}
  • ME789 : Product Development Laboratory {Practical}

 Research Scholars

Ph.D. Students [20]
Studies On Some Aspects Of Multi-Objective Optimization: A Case Study Of Electrical Discharge Machining Process

 Chinmaya Prasad Mohanty

 Graduated  (2014)

 Supervisor

Supply Chain Management

 Sanjita Jaipuria

 Graduated  (2014)

 Supervisor

Robotics

 Pragyan Paramita Mohanty

 Graduated  (2014)

 Supervisor

A Study On Scheduling Of Automated Systems Evaluationary Techniques

 Manas Ranjan Singh

 Graduated  (2014)

 Supervisor

Parametric Optimization Of Taper Cutting Process Using Wire Electrical Discharge Machining (Wedm)

 Bijaya Bijeta Nayak

 Graduated  (2015)

 Supervisor

A Study On Parametric Appraisal Of Fused Deposition Modelling (Fdm) Process

 Swayam Bikash Mishra

 Graduated  (2016)

 Supervisor

Copper Deposition On Rp Parts: An Experimental Investigation

 Shrutee Nigam

 Graduated  (2017)

 Co-Supervisor

Development, Characterization Of Mechanical Properties, Wear Behaviour And Machining Analysis Of Ceramic Composites For Bio-Medical Applications

 Amit Kumar Mehar

 Graduated  (2017)

 Supervisor

Experimental And Numerical Analysis Of Nonlinear Dynamic Behavior Of Delaminated Composites Shell Panel Under Hygro-Thermo-Mechanical Loading

 Chetan Kumar Hirwani

 Graduated  (2018)

 Co-Supervisor

A Meta-Heuristic Approach For Solving Flexible Flow-Shop And Job-Shop Scheduling Problems

 Raviteja Buddala

 Graduated  (2018)

 Supervisor

Environmental Friendly Iron Oxide Based Magnetic Nanomaterials: Synthesis, Characterization And Application For Arsenic Removal

 Uttam Kumar Sahu

 Graduated  (2018)

 Co-Supervisor

Studies On Some Aspects Of Meta-Heuristic Algorithms In Solving Engineering Optimization Problems

 Joji Thomas

 Graduated  (2018)

 Supervisor

Studies On Some Aspects Of Implementation Of Reverse Logistics In Indian Context

 Santosh Kumar Sharma

 Graduated  (2018)

 Supervisor

Experimental Investigation On Drilling And Welding Of Engineering Materials Using Laser

 Suman Chatterjee

 Graduated  (2019)

 Supervisor

Sustainable Supply Chain Management

 Arpan Paul

 OnGoing

 Supervisor

Physics Based Meta-Heuristic Approaches In Solving Design And Manufacturing Problems

 Nikhil Aditya

 OnGoing

 Supervisor

Experimental And Numerical Analysis Of Vibro-Acoustic Behavior Of Natural Fiber Reinforced Hybrid Composite Structure

 Rajesh Kumar Satankar

 OnGoing

 Co-Supervisor

Study On Micro Drilling Characteristics Of A Ni-Based Superalloy

 Sabana Azim

 OnGoing

 Supervisor

Performance Assessment Of Rapid Tool Electrodes During Electrical Discharge Machining Of Titanium And Its Alloy

 Anshuman Kumar Sahu

 Graduated  (2021)

 Supervisor

Deposition Of Fly Ash + Bauxite Coatings On Metals Using Nitrogen And Hydrogen Plasma

 Subrat Kumar Bhuyan

 Graduated  (2021)

 Co-Supervisor

Executive Ph.D. Students [2]
Dissimilar Metal Joining Process And Industrial Application

 Debajyoti Mukherjee

 OnGoing

 Co-Supervisor

Safety Engineering(Production And Manufacturing Engg)

 Manoja Kumar Mishra

 OnGoing

 Supervisor

M.Tech by Research Students [4]
Machining Of Hardened Steel Using Coated Tools

 Rajiv Kumar Yadav

 Graduated  (2014)

 Supervisor

Machining Of Composites

 Suman Chatterjee

 Graduated  (2014)

 Supervisor

Studies On Parametric Appraisal Of Friction Stir Welding

 Ankit Kumar Pandey

 Graduated  (2016)

 Supervisor

Studies On Metallization Of Rp Parts For Use In Preserving Artefacts

 Rameez Malik

 Graduated  (2016)

 Supervisor

 Dissertations

PG Dissertation
  • Manas Ranjan Panda (213ME2414), "An Numerical and Experimental Approach to study the Parametric Effect of Ultrasonic Welding" - M.Tech.    Supervisor     2014-15 Spring
  • Omosa B. Michael Geoffrey (213ME2501), "A Decision Support System for Managing Reverse Supply Chain" - M.Tech.    Supervisor     2014-15 Spring
  • Gourav Prasad (214ME2369), "FE modelling of EDM process" - M.Tech.    Supervisor     2015-16 Spring
  • Surinarayana Cherukuri (214ME2548), "Experimental and Numerical Analysis of Angular Error in Taper Cutting using Wire Electrical Discharge Machining" - M.Tech.    Supervisor     2015-16 Spring
  • Sushanta Kumar Sahoo (214ME2276), "Environmental Friendly Electroless Copper Metallization on FDM Build ABS Parts" - M.Tech.    Supervisor     2015-16 Spring
  • Akash Verma (215ME2206), "TURNING OF SUPERALLOY- A NUMERICAL MODELLING" - M.Tech.    Supervisor     2016-17 Spring
  • Bighnesh Kumar Sahu (215ME2200), "Electro-Discharge Machining of Super Alloy Inconel 718: Emphasis on Material removal efficiency and Surface integrity of the End product" - M.Tech.    Co-supervisor     2016-17 Spring
  • Krishna Kumar (215ME2401), "EXPERIMENTAL STUDY ON DRILLING OF GFRP AND CFRP COMPOSITES" - M.Tech.    Supervisor     2016-17 Spring
  • Rahul Sharma (215ME2201), "Drilling of Inconel Superalloy: A Numerical Modelling" - M.Tech.    Supervisor     2016-17 Spring
  • Ajitesh Mishra (216CH2110), "Power Plant Process Safety Management" - M.Tech.    Supervisor     2017-18 Spring
  • Deveshree Hazra (216CH2109), "Hazard identification and risk assessment and formulation of safety report of blast furnace" - M.Tech.    Supervisor     2017-18 Spring
  • Mahajan Vaibhav Mansaram (216ME2368), "Experimental study on dimensional accuracy of FDM build part" - M.Tech.    Supervisor     2017-18 Spring
  • Mousumi Mohapatra (216CH2111), "Hazard Identification and Risk Assessment of Rail and Structural Mill and Different Maintenance Activities" - M.Tech.    Supervisor     2017-18 Spring
  • Praveen Kumar Nayak (216ME2370), "Effect of Process Parameters on the Mechanical Behaviour of FDM and DMLS Build Parts: An Experimental Investigation" - M.Tech.    Supervisor     2017-18 Spring
  • Priya Singh (216CH2120), "Study and Analysis of Hazard Identification and Risk Assessment: A Case Study" - M.Tech.    Supervisor     2017-18 Spring
  • Subhajit Singh (216ME2377), "Surface Roughness Estimation of FDM and DMLS build Parts" - M.Tech.    Supervisor     2017-18 Spring
  • Mukesh Kumar Yadav (217ME2202), "Experimental studies and effect of process parameter on mechanical properties of a friction stir welded joint of Aluminum alloy" - M.Tech.    Supervisor     2018-19 Spring
  • Piyush Mishra (217ME2221), "3D printed dry electrodes for wearable EEG systems" - M.Tech.    Supervisor     2018-19 Spring
  • R Durga Prasad Reddy (217ME2227), "Investigation of performance of environment-friendly electroless copper coated ABS plastic rapid EDM hollow electrode" - M.Tech.    Supervisor     2018-19 Spring
  • V Rahul (218ME2219), "Optimization of plate-fin heat exchanger and shell and tube heat exchanger using Simple optimization (SOPT) algorithm" - M.Tech.    Supervisor     2019-20 Spring
  • Vuriti Venkata Leelakrishna (218ME2210), "Optimization of supply of oxygen cylinders from a single source to multiple destinations through vehicle routing problem by particle swarm optimization" - M.Tech.    Supervisor     2019-20 Spring
  • Abhijeet (219ME2299), "A fuzzy QoS-aware manufacturing service composition method in Cloud Manufacturing using Genetic Algorithm" - M.Tech.    Supervisor     2020-21 Spring
  • Durgesh Vijay Barve (219ME2400), "Identification of Critical Success Factors for the Green Supply Chain using Multi-criteria Decision Making Approach" - M.Tech.    Supervisor     2020-21 Spring
  • Golkonda Raghavendra Swamy (219ME2567), "Swarm-based chaotic gravitational search algorithm for solving mechanical design problems" - M.Tech.    Supervisor     2020-21 Spring
UG Dissertation
  • Swadesh Kumar Nayak (111ME0323), "CFD ANALYSIS OF FLOW PATTERN IN ELECTROCHEMICAL MACHINING PROCESS" - B.Tech.    Supervisor     2014-15 Spring
  • Tribed Kumar Mahanand (111ME0309), "differential evolutiuon optimization technique to design gear train system" - B.Tech.    Supervisor     2014-15 Spring
  • Abhishek Dash (112ME0334), "Optimization of Drilling Parameters of GFRP using Bat Algorithm to minimize delamination" - B.Tech.    Supervisor     2015-16 Spring
  • Chandan Kumar Pothal (112ME0357), "CFD Analysis of Circular Aperture Nozzle In Abrasive Jet Machining" - B.Tech.    Supervisor     2015-16 Spring
  • Partho Protim Biswas (112ME0633), "Drilling of Hard Materials" - B.Tech.    Supervisor     2015-16 Spring
  • Preetam Subudhi (112ME0377), "EXPERIMENTAL ANALYSIS OF DRILLING OF GLASS FIBER REINFORCED PLASTICS COMPOSITES" - B.Tech.    Supervisor     2015-16 Spring
  • Vipul Vaibhav (112ME0381), "Simulation and Parametric analysis of Drilling of Inconel 718 Using DEFORM-3D" - B.Tech.    Supervisor     2015-16 Spring
  • Naushita Sharma (113ME0423), "Development of computational and experimental methodology to address the issues in water-energy nexus for different industrial sectors" - B.Tech.    Supervisor     2016-17 Spring
  • Rohit Ranjan Rath (113ME0406), "STUDY THE EFFECT OF POWDER METALLURGY (P/M) PROCESS PARAMETERS ON PROPERTIES OF METAL MATRIX COMPOSITES FOR EDM TOOL USING P/M ROUTE" - B.Tech.    Supervisor     2016-17 Spring
  • Shubham Panda (113ME0398), "DRILLING OF GLASS FIBER REINFORCED POLYMER (GFRP) COMPOSITES" - B.Tech.    Supervisor     2016-17 Spring
  • T. Sriram Shraff (113ME0424), "DRILLING OF GLASS FIBER REINFORCED POLYMER (GFRP) COMPOSITES" - B.Tech.    Supervisor     2016-17 Spring
  • Udayan Singh (113ME0425), "Design and development of experimental and simulation framework for emerging challenges in Indian natural gas industry" - B.Tech.    Supervisor     2016-17 Spring
  • Madhuri Shankar Ku (113ME0519), "CFD Analysis of spontaneous combustion" - B.Tech.    Supervisor     2017 Summer
  • Deepak Kumar Barik (114ME0217), "Optimisation of job shop scheduling in Flexible manufacturing system using AGVs" - B.Tech.    Supervisor     2017-18 Spring
  • Kiran Kumar Patra (114ME0235), "DIMENSIONAL ERROR ESTIMATION OF RP BUILD SPUR GEAR" - B.Tech.    Supervisor     2017-18 Spring
  • Bibek Rauniyar (115ME0050), "Study of surface roughness and angle deviation of rapid prototyping model produced by FDM machine." - B.Tech.    Supervisor     2018-19 Spring
  • Bijay Kumar Mohapatra (115ME0449), "Electroless Copper Deposition on ABS Parts" - B.Tech.    Supervisor     2018-19 Spring
  • Naraboina Venkata Sai Arun Kumar (114ME0482), "SCHEDULING OF A SINGLE MACHINE TO MINIMIZE THE WEIGHTED NUMBER OF LATE JOBS COMPARING ALGORITHMS" - B.Tech.    Supervisor     2018-19 Spring
  • S Chaitanya Vara Prasad (115ME0120), "Study of surface roughness and angle deviation of rapid prototyping model produced by FDM machine" - B.Tech.    Supervisor     2018-19 Spring
  • Sangram Keshari Rout (115ME0271), "Flow Shop Scheduling problems using Heuristic Algorithms" - B.Tech.    Supervisor     2018-19 Spring
  • Sheikh Imran (115ME0043), "Study of surface roughness and angle deviation of Rapid prototyping model produced by FDM machine" - B.Tech.    Supervisor     2018-19 Spring
  • Swosti Sworup Sahoo (115ME0469), "EFFECT OF INPUT PROCESS PARAMETERS ON ULTIMATE TENSILE STRENGTH IN FRICTION STIR WELDING OF ALUMINIUM ALLOYS 6061- TO- 6061 SIMILAR METALS" - B.Tech.    Supervisor     2018-19 Spring
  • Jay Prakash Sah Kanu (116ME0487), "Scheduling of Flexible Manufacturing Systems Using Genetic Algorithm" - B.Tech.    Supervisor     2019-20 Spring
  • Karanam Venkatesh (116ME0506), "DESIGN OF HONEYCOMB STRUCTURE WITH VARYING CELL GEOMETRIES" - B.Tech.    Supervisor     2019-20 Spring
  • Nilambar Patra (116ME0472), "Particle Swarm Optimization Algorithm for Vehicle Routing Problem" - B.Tech.    Supervisor     2019-20 Spring
  • Nileswar Patra (116ME0473), "Effect of process parameters on the maximum principal stress developed in the work piece during friction stir welding" - B.Tech.    Supervisor     2019-20 Spring

 Awards and Honours

Memberships / Fellowships
  • LMISTE, AMIE(India), MSDSI, MAIMS,