Saroj Kumar Patel

Professor

Mechanical Engineering

 (+91) 661 246 2516 , 3516

 skpatel[at]nitrkl.ac.in

 Biosketch

55

Publications       

0

Sponsored Projects

0

Consultancy Projects

10

Doctoral Students

1

Short-term Course

10

PG Dissertation

 Personal Information

Prof. Saroj Kumar Patel

Professor

Mechanical Engineering

Joined in Oct 1990

 Room Number: xx-000

 Department of Mechanical Engineering, National Institute of Technology Rourkela, Sundargarh, Odisha, India - 769008

 Education Qualification

  1. Ph.D.
    Statistical Quality Control
    IIT Kharagpur
  2. M.Tech
    Aircraft Production Engineering
    IIT Madras
  3. B.Sc (Engg)
    Mechanical Engineering
    NIT Rourkela

 Experience

Teaching Experience
  • Optimization Techniques, Operations Research, Industrial Engg and Management, Metrology, Quality Control and Reliability,  NIT Rourkela,  19 Oct 1990 - Present
Industrial Experience
  • Production Planning and Control in Overhaul of aero-engines,  Hindustan Aeronautics Limited, Korapaut Division,  24 Jul 1985 - 15 Oct 1990

 Expertise Information

Research Group
Industrial Engineering: [Production Engineering Division]
Areas of Interest
Statistical Quality Control, Optimization, Operations Management,Production Engg., Bioenergy

 Projects

No Projects Found....

 Continuing Education

Optimization Methods in Engineering Design

 Mechanical Engineering

 Coordinator

 29 Sep 2016 - 30 Sep 2016

Short-term Course

 Publications

0

Google Scholar h-index

0

Google Scholar i10-index

7

Scopus h-index

Total Publications: 55
S. Nigam, S. S. Mahapatra, and S. K. Patel, "Effect of stand-off distance in thermally sprayed copper coating", Surface Engineering, vol.35, no.9, pp.826-832, Taylor & Francis, February 2019, 10.1080/02670844.2019.1581690 Article
Ch. S. Kumar and S. K. Patel, "Application of surface modification techniques during hard turning: Present work and future prospects", International Journal of Refractory Metals and Hard Materials, vol.76, pp.112-127, Elsevier, November 2018, 10.1016/j.ijrmhm.2018.06.003 Article
Ch. S. Kumar and S. K. Patel, "Performance analysis and comparative assessment of nano-composite TiAlSiN/TiSiN/TiAlN coating in hard turning of AISI 52100 steel", Surface and Coatings Technology, vol.335, pp.265–279, Elsevier, February 2018, 10.1016/j.surfcoat.2017.12.048 Article
Ch. S. Kumar and S. K. Patel, "Effect of chip sliding velocity and temperature on the wear behaviour of PVD AlCrN and AlTiN coated mixed alumina cutting tools during turning of hardened steel", Surface and Coatings Technology, vol.334, pp.509-525, Elsevier, January 2018, 10.1016/j.surfcoat.2017.12.013 Article
Ch. S. Kumar and S. K. Patel, "Investigations on the effect of thickness and structure of AlCr and AlTi based nitride coatings during hard machining process", Journal of Manufacturing Processes, vol.31, pp.336-347, Elsevier, January 2018, 10.1016/j.jmapro.2017.11.031 Article

Show All Publications(+)

Ch. S. Kumar and S. K. Patel, "Effect of WEDM surface texturing on Al2O3/TiCN composite ceramic tools in dry cutting of hardened steel", Ceramics International, vol.44, no.2, pp.2510-2523, Elsevier 2018, 10.1016/j.ceramint.2017.10.236 Article
D. K. Sen, S. Datta, S. K. Patel, and S. S. Mahapatra, "Green Supplier Selection in Fuzzy Context: A Decision Making Scenario on Application of Fuzzy-MULTIMOORA", International Journal of Services and Operations Management, vol.28, no.1, Inderscience, August 2017, 10.1504/IJSOM.2017.085907 Article
Ch. S. Kumar and S. K. Patel, "Experimental and numerical investigations on the effect of varying AlTiN coating thickness on hard machining performance of Al2O3-TiCN mixed ceramic inserts", Surface and Coatings Technology, vol.309, pp.266–281, Elsevier 2017, 10.1016/j.surfcoat.2016.11.080 Article
K. Tudu, S. Murugan, and S. K. Patel, "Experimental study of diethyl ether addition on the performance and emissions of a diesel engine", International Journal of Ambient Energy, vol.38, no.4, pp.332-338, Taylor and Francis 2017, 10.1080/01430750.2015.1100679 Article
D. K. Sen, S. Datta, S. K. Patel, and S. S. Mahapatra, "Green supplier selection in fuzzy context: a decision-making scenario on application of fuzzy-MULTIMOORA", International Journal of Services and Operations Management, vol.28, no.1, pp.98-140, Inderscience Publications 2017, 10.1504/IJSOM.2017.085907 Article
Ch. S. Kumar and S. K. Patel, "Hard machining performance of PVD AlCrN coated Al2O3/TiCN ceramic inserts as a function of thin film thickness", Ceramics International, vol.43, no.16, pp.13314-13329, Elsevier 2017, 10.1016/j.ceramint.2017.07.030 Article
P. Mohanty and S. K. Patel, "Operations Research", Scientific Publusher 2017 Book
S. Murugan, K. Tudu, and S. K. Patel, "Performance and emission studies of a naturally aspirated diesel engine", Journal of Clean Energy Technologies, vol.5, no.5, pp.359-365, JOCET 2017, 10.18178/JOCET.2017.5.5.398 Article
K. Tudu, S. Murugan, and S. K. Patel, "Effect of tyre derived oil-diesel blend on the combustion and emissions characteristics in a compression ignition engine with internal jet piston geometry", Fuel, vol.184, pp.89-99, Elsevier, November 2016, 10.1016/j.fuel.2016.06.065 Article
D. K. Sen, S. Datta, S. K. Patel, and S. S. Mahapatra, "Fuzzy-TODIM for industrial robot selection", in 1st International Conference on Emerging Trends in Mechanical Engineering,, IEEE, Hyderabad, India, September 2016 Inproceedings
S. Nigam, S. S. Mahapatra, and S. K. Patel, "Numerical modelling of sliding wear caused by pin-on-disk method over copper coated ABS plastic substrate", IOP Conference Series: Materials Science and Engineering, vol.149, no.1, IOP Publishing, September 2016, 10.1088/1757-899X/149/1/012079 Article
S. Nigam, S. K. Patel, and S. S. Mahapatra, "Sliding wear analysis of a metallic coating on ABS plastic substrate", Applied Mechanics & Materials, vol.852, pp.381-387, Trans Tech Publications, September 2016, 10.4028/www.scientific.net/AMM.852.381 Article
A. K. Mehar, S. S. Mahapatra, and S. K. Patel, "Fabrication, processing and assessment of mechanical behaviour of Hydroxyapatite (HAp) reinforced Polycarbonate (PC) Composite for bio-medical applications", Trends in Industrial and Mechanical Engineering, pp.84-90, Ethan Publishing, July 2016 Article
K. Tudu, S. Murugan, and S. K. Patel, "Experimental analysis of a di diesel engine fuelled with light fraction of pyrolysis oil", International Journal of Oil, Gas and Coal Technology, vol.11, no.3, pp.318-338, Inderscience, December 2016, 10.1504/IJOGCT.2016.074770 Article
D. K. Sen, S. Datta, S. K. Patel, and S. S. Mahapatra, "G-resilient supplier selection in fuzzy environment: application potential of satisfaction function and distance based approach", in 4 th Asia Conference on Mechanical and Materials Engineering (ACMME), ACMME, Kuala Lumpur, Malaysia, December 2016 Inproceedings
P. K. Mohanty and S. K. Patel, "Basic Statistics", Scientific Publusher, Ansari Road, Daryaganj, New Delh 2016 Book
Ali. P. Samal, S. K. Patel, and M. Kumar, "Characterization of properties and estimation of power generation potentials of some woody biomass residues", Energy Sources, Part A: Recovery, Utilization and Environmental Effects, vol.38, no.12, pp.1819-1824, Taylor and Francis Inc. 2016, 10.1080/15567036.2014.1002951 Article
A. Das, A. Mukhopadhyay, S. K. Patel, and B. B. Biswal, "Comparative assessment on machinability aspects of AISI 4340 alloy steel using uncoated carbide and coated cermet inserts during hard turning", Arabian Journal of Science and Engineering, vol.41, no.11, pp.4531-4552, Springer 2016, 10.1007/s13369-016-2160-0 Article
K. Tudu, S. Murugan, and S. K. Patel, "Effect of diethyl ether in a DI diesel engine run on a tyre derived fuel-diesel blend", Journal of the Energy Institute, vol.89, no.4, pp.525-535, Elsevier 2016, 10.1016/j.joei.2015.07.004 Article
A. K. Mehar, S. S. Mahapatra, and S. K. Patel, "Assessment of mechanical properties and wear behaviour of ceramic composites", International Journal of Engineering Technology, Management and Applied Sciences, vol.3, pp.1-11, IJETMAS, March 2015 Article
D. Sen, S. Datta, S. K. Patel, and S. S. Mahapatra, "Multi-criteria decision making towards selection of industrial robot: Exploration of PROMETHEE II method", Benchmarking: An International Journal, vol.22, no.3, pp.465-487, Emerald, December 2015, 10.1108/BIJ-05-2014-0046 Article
S. Nigam, S. K. Patel, S. S. Mahapatra, N. Sharma, and K. S. Ghosh, "Nickel coating on high strength low alloy steel by pulse current deposition", IOP Conference Series: Materials Science and Engineering, vol.75, no.1, pp.012024, IOP, December 2015 Article
S. N. Alam, S. Islam, and S. K. Patel, "Advanced guide to MATLAB: practical examples in science and engineering", IK International Publishing House Pvt Ltd, Green Park Extension, Uphaar Cinema Market, New Delhi 2015 Book
A. Ganguly and S. K. Patel, "Computer-aided design of X and R charts using teaching-learning-based optimisation algorithm", International Journal of Productivity and Quality Management, vol.16, no.3, pp.325-346, Inderscience 2015, 10.1504/IJPQM.2015.071517 Article
S. Satapathy, S. S. Mahapatra, S. K. Patel, A. Biswas, and P. D. Mishra, "Service satisfaction in E_Electricity service in Odisha (a state of India) by structural equation modeling", Benchmarking: An International Journal, vol.21, no.4, pp.634-650, Emerald Group Publishing Limited, July 2014, 10.1108/BIJ-07-2012-0049 Article
A. Ganguly and S. K. Patel, "A teaching-learning based optimization approach for economic design of X-bar control chart", Applied Soft Computing Journal, vol.24, pp.643-653, Elsevier 2014, 10.1016/j.asoc.2014.08.022 Article
A. Ganguly and S. K. Patel, "Joint economic design of X-bar and R charts using simulated annealing", International Journal of Process Management and Benchmarking, vol.4, no.3, pp.305-323, Inderscience 2014, 10.1504/IJPMB.2014.063238 Article
K. Tudu, S. Murugan, and S. K. Patel, "Light oil fractions from a pyrolysis plant-an option for energy use", in Energy Procedia, vol.54, pp.615-626, Elsevier, Mumbai 2014, 10.1016/j.egypro.2014.07.303 Inproceedings
S. Satapathy, S. S. Mahapatra, S. K. Patel, A. Biswas, and P. Mishra, "Service satisfaction in E_electricity service in Odisha (a state of India) by structural equation modeling", Benchmarking: An International Journal, vol.21, no.4, pp.634-650, Emerald 2014, 10.1108/BIJ-07-2012-0049 Article
M. Kumar and S. K. Patel, "The characteristics and power generation energetics of coal, cattle dung, rice husk, and their blends", Energy Sources, Part A: Recovery, Utilization and Environmental Effects, vol.36, no.7, pp.700-708, Taylor & Francis 2014, 10.1080/15567036.2010.545798 Article
S. K. Sahoo, S. Datta, S. K. Patel, and S. S. Mahapatra, "Industrial supply chain performance benchmarking using fuzzy grey relation method", Global Journal of Management and Business Studies, vol.3, no.7, pp.775-784, Research India Publications, November 2013 Article
S. K. Sahu, S. Datta, S. K. Patel, and S. S. Mahapatra, "Supply chain performance appraisement, benchmarking and decision-making: empirical study using grey theory and grey-MOORA", International Journal of Process Management and Benchmarking, vol.3, no.3, pp.233-289, Inderscience, January 2013, 10.1504/IJPMB.2013.058155 Article
S. Satapathy, S. S. Mahapatra, S. K. Patel, and P. Mishra, "Analysis of e-service of electricity utility provider: an Indian perspective", International Journal of Logistics Systems and Management (IJLSM), vol.15, no.1, pp.18-31, Inderscience 2013, 10.1504/IJLSM.2013.053236 Article
S. Satapathy, S. K. Patel, S. S. Mahapatra, and P. Mishra, "Evaluation of service quality of electricity sector by ANN method and sector wise analysis by linear discriminate analysis (LDA)", International Journal of Procurement Management, vol.6, no.3, pp.350-377, Inderscience 2013, 10.1504/IJPM.2013.053653 Article
M. Kumar, H. S. Baghel, and S. K. Patel, "Reduction and swelling of fired hematite iron ore pellets by non-coking coal fines for application in sponge ironmaking", Mineral Processing and Extractive Metallurgy Review, vol.34, no.4, pp.249-267, Taylor and Francis 2013, 10.1080/08827508.2012.656776 Article
S. K. Sahu, S. Datta, S. K. Patel, and S. S. Mahapatra, "Supply chain performance appraisement, benchmarking and decision-making: Empirical study using grey theory and grey-MOORA", International Journal of Process Management and Benchmarking, vol.3, no.3, pp.233-289, Inderscience 2013, 10.1504/IJPMB.2013.058155 Article
H. Dalai, S. Dewangan, S. Datta, S. K. Patel, and S. S. Mahapatra, "A case study on quality and productivity optimization in electric discharge machining (EDM)", Advanced Materials Research, vol.445, pp.27-32, Trans Tech Publications, January 2012, 10.4028/www.scientific.net/AMR.445.27 Article
S. Satapathy, S. K. Patel, and P. Mishra, "Discriminate analysis and neural network approach in water utility service", International Journal of Services and Operations Management (IJSOM), vol.12, no.4, pp.468-489, Inderscience 2012, 10.1504/IJSOM.2012.047954 Article
S. Satapathy, S. K. Patel, A. Biswas, and P. Mishra, "Interpretive structural modeling for E-electricity utility service", Service Business, vol.6, no.3, pp.349-367, Springer 2012, 10.1007/s11628-012-0139-9 Article
S. Satapathy, S. K. Patel, S. S. Mahapatra, G. S. Beriha, and A. Biswas, "Service quality evaluation in electricity utility industry: an empirical study in India", International Journal of Indian Culture and Business Management, vol.5, no.1, pp.59-75, Inderscience Publishers, December 2011, 10.1504/IJICBM.2012.044018 Article
M. Kumar and S. K. Patel, "An assessment of electricity generation potentials of agricultural residues for power industries in india", Energy Sources, Part A: Recovery, Utilization and Environmental Effects, vol.33, no.23, pp.2171-2180, Taylor & Francis 2011, 10.1080/15567030903515096 Article
M. Kumar, S. K. Patel, and H. P. F, "Characteristics of some forestry non-woody biomass species and estimation of their power generation potentials", Energy Sources, Part A: Recovery, Utilization and Environmental Effects, vol.33, no.17, pp.1616-1624, Taylor and Francis 2011, 10.1080/15567030903397875 Article
J. C. Mohanta, D. R. Parhi, and S. K. Patel, "Path planning strategy for autonomous mobile robot navigation using Petri-GA optimisation", Computers and Electrical Engineering, vol.37, no.6, pp.1058-1070, Elsevier 2011, 10.1016/j.compeleceng.2011.07.007 Article
M. Kumar, S. K. Patel, and M. S, "Studies on characteristics of some shrubaceous non-woody biomass species and their electricity generation potentials", Energy Sources, Part A: Recovery, Utilization and Environmental Effects, vol.32, no.9, pp.786-795, Taylor and Francis 2010, 10.1080/15567030903060341 Article
M. Kumar, N. S, and S. K. Patel, "Studies on the reduction-swelling behaviors of hematite iron ore pellets with noncoking coal", Mineral Processing and Extractive Metallurgy Review, vol.31, no.4, pp.256-268, Taylor and Francis 2010, 10.1080/08827508.2010.508826 Article
M. Kumar and S. K. Patel, "Assessment of reduction behavior of hematite iron ore pellets in coal fines for application in sponge ironmaking", Mineral Processing and Extractive Metallurgy Review, vol.30, no.3, pp.240-259, Taylor and Francis 2009, 10.1080/08827500802498215 Article
M. Kumar, P. Mohapatra, and S. K. Patel, "Studies on the reduction kinetics of hematite iron ore pellets with noncoking coals for sponge iron plants", Mineral Processing and Extractive Metallurgy Review, vol.30, no.4, pp.372-392, Taylor and Francis 2009, 10.1080/08827500903185315 Article
M. Kumar and S. K. Patel, "Characteristics of Indian non-coking coals and iron ore reduction by their chars for directly reduced iron production", Mineral Processing and Extractive Metallurgy Review, vol.29, no.3, pp.258-273, Taylor and Francis 2008, 10.1080/08827500801997902 Article
M. Kumar, J. S, and S. K. Patel, "Characterization of properties and reduction behavior of iron ores for application in sponge ironmaking", Mineral Processing and Extractive Metallurgy Review, vol.29, no.2, pp.118-129, Taylor and Francis 2008, 10.1080/08827500701421896 Article
M. Kumar and S. K. Patel, "Energy values and estimation of power generation potentials of some non-woody biomass species", Energy Sources, Part A: Recovery, Utilization and Environmental Effects, vol.30, no.8, pp.765-773, Taylor and Francis 2008, 10.1080/15567030701436206 Article

 Courses Taught

  • ME333 : Process Control and Assurance Science {Theory}
  • ME4237 : Decision Modeling {Theory}
  • ME430 : Industrial Management {Theory}
  • ME431 : Decision Modeling {Theory}
  • ME601 : Optimization Method in Engineering Design {Theory}
  • ME6232 : Optimization Method in Engineering Design {Theory}
  • ME647 : Production Management {Theory}
  • ME672 : Industrial Engineering Laboratory {Practical}
  • WS172 : workshop Practice – II {Practical}

 Research Scholars

Ph.D. Students
Machining

 Debasish Panigrahi

 OnGoing

 Supervisor

Laser Micro-Machining

 Sweta Rout

 OnGoing

 Supervisor

Production And Industrial Engineering

 Abinash Jena

 OnGoing

 Supervisor

Effect Of Surface Modifications On The Hard Turning Performance Of Al2o3/Ticn Mixed Ceramic Cutting Tools

 Ch Sateesh Kumar

 Graduated

 Supervisor

Analysis Of Decision Support Systems Of Industrial Relevance: Application Potential Of Fuzzy And Grey Set Theories

 Dilip Kumar Sen

 Graduated

 Co-Supervisor

Copper Deposition On Rp Parts: An Experimental Investigation

 Shrutee Nigam

 Graduated

 Supervisor

Experimental Investigation On Different Machinability Aspects Of Aisi 4340 Hardened Alloy Steel Using Cermet Inserts Under Various Cutting Environments

 Anshuman Das

 Graduated

 Supervisor

Development, Characterization Of Mechanical Properties, Wear Behaviour And Machining Analysis Of Ceramic Composites For Bio-Medical Applications

 Amit Kumar Mehar

 Graduated

 Co-Supervisor

Experimental Studies Of A Direct Injection Diesel Engine Fuelled With Light Fraction Pyrolysis Oil-Diesel Blend

 Kapura Tudu

 Graduated

 Supervisor

Economic Design Of Control Charts Using Metaheuristic Approaches

 Abhijeet Ganguly

 Graduated

 Supervisor

Executive Ph.D. Students
Design Of Suitable Mining Method For Underground Metal Mine

 Elamurugan A

 OnGoing

 Co-Supervisor

M.Tech by Research Students
Thermal Engineering

 Ali Padarbinda Samal

 Graduated

 Supervisor

Decision Support System

 Santosh Kumar Sahu

 Graduated

 Co-Supervisor

Thermal Engineering

 Satyabrata Tripathy

 Graduated

 Supervisor

 Dissertations

PG Dissertation
  • Akash Mukhopadhyay (213ME2412), "Experimental investigations and optimization of the machinability aspects of AISI 4340 alloy steel using uncoated carbide and coated cermet inserts in dry hard turning" - M.Tech.    Supervisor     2014-15 Spring
  • Rambabu Juvvala (213ME2406), "Economic Design of X-bar Control Chart using Gravitational Search Algorithm" - M.Tech.    Supervisor     2014-15 Spring
  • Nirmal Tirkey (215ME2204), "INVESTIGATION OF VARIOUS MACHINING CHARACTERISTICS OF AISI 4340 HARDENED ALLOY STEEL WITH DIFFERENT UNCOATED CERMET INSERTS" - M.Tech.    Supervisor     2016-17 Spring
  • Punit Shankar Chide (215ME2400), "Experimental investigation of various surface integrity aspects in hard turning of AISI 4340 alloy steel with coated and uncoated cermets" - M.Tech.    Supervisor     2016-17 Spring
  • Adarsh Dhananjay (216ME2365), "Effects of various nanofluids on different machinability aspects of AISI 4340 hardened alloy steel" - M.Tech.    Supervisor     2017-18 Spring
  • Santoshwar Aniket Shridhar (217ME2230), "Influence of cutting speed, feed and cooling method on the machinability of Nitronic 60 by using SiAlON ceramic tool." - M.Tech.    Supervisor     2018-19 Spring
  • Thakkar Raj Dharmendrabhai (217ME2217), "Effect of machining parameters and cutting environmental conditions on the machining characteristics of Nitronic-60 using SiAlON ceramic tool." - M.Tech.    Supervisor     2018-19 Spring
  • Vaibhav Nayak (217ME2223), "Optimizing Performance Parameters of Various Mechanical Components Using Machine Learning" - M.Tech.    Supervisor     2018-19 Spring
  • Madhav Kumar Gupta (218ME2213), "Analysis of different machining aspects for dry hard turning of AISI D6 steel using HSN2 and TiCN coated Tungsten Carbide inserts." - M.Tech.    Supervisor     2019-20 Spring
  • Miyaz Kamal (218ME2214), "Experimental Investigation on Different Machinability Aspects of AISI D6 Hardened Alloy Steel using Hyperlox and Newly Developed Scalable Pulse Power Plasma Coated Tungsten Carbide Inserts under Dry Cutting Conditions" - M.Tech.    Supervisor     2019-20 Spring
UG Dissertation
  • Abhijeet Mandal (111ME0217), "Gravitational search algorithm: A novel optimization for economic design in discontinuous model" - B.Tech.    Supervisor     2014-15 Spring
  • Kaushal Kishor (111ME0279), "Design and Fabrication of Intake and Exhaust Manifold of a Prototype Race Car" - B.Tech.    Supervisor     2014-15 Spring
  • Malay Milan Choudhury (111ME0288), "Use of Multi-Criteria Decision Making in Establishment of Solar Power Plant in NIT Rourkela" - B.Tech.    Supervisor     2014-15 Spring
  • Sambeet Samantaray (111ME0344), "EXPERIMENTAL ANALYSIS ON SURFACE ROUGHNESS OF EN-24 HARDENED STEEL" - B.Tech.    Supervisor     2014-15 Spring
  • Ashish Kumar Pradhan (112ME0250), "Performance Evaluation of Various Metal Working Fluids Using MQL Technique in Hard Turning of AISI 4340 Alloy Steel" - B.Tech.    Supervisor     2015-16 Spring
  • Chiranjeet Sahoo (112ME0368), "Design and Fabrication of a Storage Rack for wooden logs" - B.Tech.    Supervisor     2015-16 Spring
  • Peri Sowmya (112ME0318), "Process Reengineering: Converting a non-functional lathe into a functional wood turning lathe" - B.Tech.    Supervisor     2015-16 Spring
  • Akilesh Babu Prasadi (113ME0400), "Optimization of machining parameters in hard turning of AISI 4340 alloy steel using Jaya algorithm and Differential Evolution algorithm" - B.Tech.    Supervisor     2016-17 Spring
  • Ashish Ujjwal (114ME0212), "Flank wear and tool-chip contact length analysis of hardened AISI 4340 steel using vegetable oil based nanofluids" - B.Tech.    Supervisor     2017-18 Spring
  • Omprakash Pradhan (114ME0240), "INVESTIGATING SURFACE INTEGRITY ASPECTS OF HARDENED AISI 4340 STEEL USING VEGETABLE OIL BASED NANOFLUID" - B.Tech.    Supervisor     2017-18 Spring
  • Vakada Murali Krishna (114ME0480), "INVESTIGATION OF CUTTING FORCES AND RESIDUAL STRESSES BY HARD TURNING OF AISI 4340 ALLOY STEEL BY USING VEGETABLE OIL-BASED NANO-FLUIDS" - B.Tech.    Supervisor     2017-18 Spring
  • P. Niklesh Reddy (115ME0462), "Combustion, Emission and Performance Characteristics of a Diesel Engine Fuelled with Orange Oil Diesel Blends using Different Piston Geometries with EGR" - B.Tech.    Supervisor     2018-19 Spring
  • Subhakanta Sahoo (116ME0490), "Economic design of X-bar control chart using Rao-2 algorithm" - B.Tech.    Supervisor     2019-20 Spring
  • Vijay Kumar (116ME0457), "Economic design of X-bar control chart using Rao-1 algorithm" - B.Tech.    Supervisor     2019-20 Spring

 Awards and Honours

Memberships / Fellowships
  • FIE(India),    2007