Subash Chandra Mishra

Professor HAG

Metallurgical and Materials Engineering

 (+91) 661 246 2555 , 3555

 scmishra[at]nitrkl.ac.in

 Biosketch

13

Publications       

0

Sponsored Projects

0

Consultancy Projects

9

Doctoral Students

0

Continuing Education

10

PG Dissertation

 Personal Information

Prof. Subash Chandra Mishra

Professor HAG

Metallurgical and Materials Engineering

Joined in Feb 1989

 Room Number:

 Department of Metallurgical and Materials Engineering, National Institute of Technology Rourkela, Sundargarh, Odisha, India - 769008

 Education Qualification

  1. Ph.D. (IIT Kharagpur)

 Experience

No Experience Found....

 Expertise Information

Research Group
Surface Engineering
Areas of Interest
Plasma Technology - Thermal Plasma an HVOF Coatings, Plasma and Reactive Plasma Processing of Materials , Natural fiber-Polymer Composite - Processing and Characterizations of Industrial Waste and Bio-waste reinforced Polymer Composites, Utilization of Bio-wastes/bio-mass for Production of Activated Carbon and Bio-Char.

 Projects

No Projects Found....

 Continuing Education

No Continuing Educations Found....

 Publications

Google Scholar h-index

Google Scholar i10-index

0

Scopus h-index

Total Publications: 13
A. Behera, B. Behera, D., A. Pattnaik, K., P. Mallick, S. Bhuyan, S. C. Mishra, and A. Behera, "Effect of Cold Work on Microstructure and Corrosion Properties of 304L Stainless Steel", Advances in Mechanical Processing and Design, ch.10, vol.1, no.1, pp.433-439, Springer, na 2020, 10.1007/978-981-15-7779-6_37 Inbook
J. Parida, S., S. C. Mishra, and A. Behera, "Effect of heat treatment on wear behaviour of Al-7?wt%Si-X wt% Mg alloys", in 2nd International Conference on Processing and Characterization of Materials, Elsevier 2020, 10.1016/j.matpr.2020.02.828 Inproceedings
B. K. Swain, P. Mallick, S. K. Bhuyan, S. S. Mohapatra, S. C. Mishra, and A. Behera, "Mechanical Properties of NiTi Plasma Spray Coating", Journal of Thermal Spray Technology, vol.29, pp.741–755, Springer 2020, https://doi.org/10.1007/s11666-020-01017-6 Article
B. K. Swain, A. Pattanaik, S. K. Bhuyan, K. Barik, S. Sethi, S. K. Samal, S. C. Mishra, and A. Behera, "Solid particle erosion wear on plasma sprayed mild steel and copper surface", Materials Today: Proceedings, vol.5, pp.20403-20412, Elsevier 2018 Article
A. Pattanaik, S. K. Bhuyan, S. C. Mishra, and A. Behera, "Dry sliding wear behaviour of micro oven treated fly ash reinforced epoxy composite using extended taguchi approach optimization", Materials Science and Engineering, vol.178, IOP Science 2017, 10.1088/1757-899X/178/1/012004 Article

Show All Publications(+)

P. Parida, S. C. Mishra, S. Sahoo, A. Behera, and B. P. Nayak, "Development and characterization of ethylcellulose based microsphere for sustained release of nifedipine", Journal of Pharmaceutical Analysis, vol.6, no.5, pp.341-344, Elsevier, October 2016, 10.1016/j.jpha.2014.02.001 Article
A. Pattanaik, S. K. Bhuyan, S. K. Samal, A. Behera, and S. C. Mishra, "Dielectric properties of epoxy resin fly ash composite", Materials Science and Engineering, vol.115, IOP Publishing 2016, 10.1088/1757-899X/115/1/012003 Article
A. Behera, A. Behera, S. C. Mishra, S. Pani, and S. Parida, "Air jet erosion test on plasma sprayed surface by varying erodent impingement pressure and impingement angle", Materials Science and Engineering, vol.75, no.1, IOP Publishing, December 2015, 10.1088/1757-899X/75/1/012004 Article
A. Behera and S. C. Mishra, "Characteristic study of fly-ash+quartz+illmenite composite coating on copper substrate", Emerging Materials Research, vol.2, no.1, pp.39-44, ICE Publishing 2013, 10.1680/emr.12.00025 Article
A. Behera, S. C. Mishra, A. Behera, and J., "Porosity analysis of plasma sprayed mild Steel by application of soft computing", Journal of Materials, vol.2013, no.2013, pp.6, Hindawi Publishing 2013, 10.1155/2013/150671 Article
A. Behera and S. C. Mishra, "A novel material used in automotive industry: compacted graphite iron", Emerging Materials Research, vol.1, no.5, pp.271-274, ICE Publishing, October 2012, 10.1680/emr.12.00002 Article
A. Behera and S. C. Mishra, "Plasma surface Engineering", Lambert, July 2012 Book
A. Behera and S. C. Mishra, "Prediction and analysis of deposition efficiency of plasma spray coating using artificial intelligence method", Open Journal of Composite Materials, vol.2, no.2, pp.54-60, Scientific Research 2012, 10.4236/ojcm.2012.22008 Article

 Courses Taught

  • MM2108 : Structure and Properties of Materials {Theory}
  • MM215 : Physics of Materials {Theory}
  • MM317 : Material Technology {Theory}
  • MM317 : Materials Technology {Theory}
  • MM3505 : Advances in Materials {Theory}
  • MM352 : Material Characterization Techniques {Theory}
  • MM354 : Non – Metallic Materials {Theory}
  • MM5523 : Surface Engineering {Theory}
  • MM272 : Characterization of Material Laboratory {Practical}
  • MM273 : Polymer Laboratory {Practical}
  • MM3521 : Characterization of Materials Laboratory {Practical}
  • MM672 : Experimental Techniques in Materials Engineering Laboratory {Practical}

 Research Scholars

Ph.D. Students [9]
Recrystallization Textures In Hcp Metals

 Surjyakant Panda

 Graduated  (2016)

 Co-Supervisor

Development Of Spheroidal Graphite Cast Iron For Nuclear Fuel Transport Cask

 Ranjan Kumar Behera

 Graduated  (2016)

 Co-Supervisor

Effect Of Processing Conditions On Properties Of Fly Ash-Epoxy Composite

 Ashutosh Pattanaik

 Graduated  (2017)

 Supervisor

Reduction Of Bauxite Through Hydrogen: Future Method Of Extraction Of Aluminium

 Bikash Ranjan Parhi

 Graduated  (2018)

 Co-Supervisor

Processing Ferroalloys From Lean Ore And Fines Using Thermal Plasma

 Sumant Kumar Samal

 Graduated  (2020)

 Supervisor

Processing Of Activated Carbon From Biomass

 Rajashree Samantaray

 Thesis Submitted

 Supervisor

Surface Modification By Plasma Technology

 Jagadish Parida

 OnGoing

 Supervisor

Material Science

 Anupama Sahu

 OnGoing

 Co-Supervisor

Deposition Of Fly Ash + Bauxite Coatings On Metals Using Nitrogen And Hydrogen Plasma

 Subrat Kumar Bhuyan

 Graduated  (2021)

 Supervisor

M.Tech by Research Students [1]
Studies On Pre-Treated Coir Dust Reinforced Polymer Composites

 Akankshya Supriya

 Graduated  (2017)

 Supervisor

 Dissertations

PG Dissertation
  • Mohammad Salim (213MM2487), "TRIBOLOGICAL BEHAVIOR OF HEAT TREATED SPHEROIDAL GRAPHITE CAST IRON" - M.Tech.    Supervisor     2014-15 Spring
  • Pankaj Kumar (213MM2484), "TRIBOLOGICAL BEHAVIOUR OF IRON-ALUMINIUM ALLOY" - M.Tech.    Supervisor     2014-15 Spring
  • Vinay Kishnani (213MM2483), "Evaluation of Blast Furnace Slag Procured from Adhunik Metallics Limited With Respect to Its Flow Characteristics" - M.Tech.    Supervisor     2014-15 Spring
  • Biswajit Kumar Swain (214MM2452), "PLASMA SMELTING OF IRON ORE FINES HAVING HIGH SILICA CONTENT" - M.Tech.    Supervisor     2015-16 Spring
  • Saphalya Kumar Samantaray (214MM2505), "Effect of Intermetallic Phases on the Tribological Behavior of Iron and Aluminium Alloy" - M.Tech.    Supervisor     2015-16 Spring
  • Harish R (215MM1428), "Study of Carbonization and Dielectric behaviour of Teak Wood Leaves" - M.Tech.    Supervisor     2016-17 Spring
  • Deepankar Pattnaik (216MM1435), "Processing value added material from bamboo leaves and a wild plant" - M.Tech.    Supervisor     2017-18 Spring
  • Sudhanshu Kumar (216MM2446), "Processing Bio-char and study of Dielectric behaviour of Castor plant biomass" - M.Tech.    Supervisor     2017-18 Spring
  • Ajit Kumar Naik (217MM1416), "Evaluation of weldability of API X70 steel by Submerged arc welding" - M.Tech.    Supervisor     2018-19 Spring
  • Shahare Vipul Tejram (218MM1256), "Processing Activated carbon from Mimosa pudica plant waste." - M.Tech.    Supervisor     2019-20 Spring
UG Dissertation
  • Amit Kumar Das (111MM0361), "STUDIES ON WEAR BEHAVIOR OF ALUMINIUM-TIN ALLOY" - B.Tech.    Supervisor     2014-15 Spring
  • Ashish Kumar (111MM0457), "AN INVESTIGATION ON EFFECT OF TEXTURE ON THE PLASTIC DEFORMATION OF CPTITANIUM" - B.Tech.    Co-supervisor     2014-15 Spring
  • Brahmananda Hota (111MM0363), "Nanoindentation Study of Pure Magnesium" - B.Tech.    Co-supervisor     2014-15 Spring
  • Debesh Kanungo (111MM0593), "STUDIES ON TRIBOLOGICAL BEHAVIOUR AND THERMAL PROPERTIES OF MARBLE POWDER-EPOXY COMPOSITES" - B.Tech.    Supervisor     2014-15 Spring
  • Nabodit Patra (111MM0576), "NANOINDENTATION STUDY OF PURE MAGNESIUM" - B.Tech.    Co-supervisor     2014-15 Spring
  • Pravat Kumar Sahoo (111MM0379), "NANOINDENTATION STUDY OF PURE MAGNESIUM" - B.Tech.    Co-supervisor     2014-15 Spring
  • Santosh Kumar (111MM0619), "AN INVESTIGATION ON EFFECT OF TEXTURE ON THE PLASTIC DEFORMATION OF CPTITANIUM" - B.Tech.    Co-supervisor     2014-15 Spring
  • Sindhoora Lakshmi Puvvada (111MM0495), "STUDIES ON WEAR BEHAVIOR OF ALUMINIUM-TIN ALLOY" - B.Tech.    Supervisor     2014-15 Spring
  • Swopnil Mohapatra (111MM0370), "STUDIES ON TRIBOLOGICAL BEHAVIOUR AND THERMAL PROPERTIES OF MARBLE POWDER-EPOXY COMPOSITES" - B.Tech.    Supervisor     2014-15 Spring
  • Gurleen Sandhu (112MM0421), "STUDIES ON WEAR AND CORROSION BEHAVIOUR OF LM0 ALUMINIUM ALLOY" - B.Tech.    Supervisor     2015-16 Spring
  • Jyotiprakash Jena (112MM0401), "STUDIES ON WEAR AND CORROSION BEHAVIOUR OF LM0 ALUMINIUM ALLOY" - B.Tech.    Supervisor     2015-16 Spring
  • Sanket Samantray (112MM0447), "STUDIES ON WEAR AND CORROSION BEHAVIOUR OF LM0 ALUMINIUM ALLOY" - B.Tech.    Supervisor     2015-16 Spring
  • Pratik Kr Gupta (113MM0566), "WEAR AND CORROSION STUDY OF MAGNESIUM-ALUMINIUM ALLOY" - B.Tech.    Supervisor     2016-17 Spring
  • Sanghamitra Kalo (113MM0448), "WEAR AND CORROSION STUDY OF MAGNESIUM-ALUMINIUM ALLOY" - B.Tech.    Supervisor     2016-17 Spring
  • Vendikol Nikhil Kumar (113MM0603), "wear and corrosion study of magnesium-aluminium alloy" - B.Tech.    Supervisor     2017 Summer
  • Satyakam Kar (114MM0255), "Wear study and Characterization of Plasma sprayed Pyroxenite coating on metallic substrates" - B.Tech.    Supervisor     2017-18 Spring
  • Smarak Rath (114MM0267), "Wear study and Characterization of Plasma sprayed Pyroxenite coating on metallic substrates" - B.Tech.    Supervisor     2017-18 Spring
  • Bikram Panda (115MM0501), "Corrosion behavior of mild steel and iron-5% Aluminium alloy heat treated at 800 degree celsius" - B.Tech.    Supervisor     2018-19 Spring
  • Prasant Sahoo (115MM0546), "Corrosion behavior of mild steel and iron-5% Aluminium alloy heat treated at 800 degree celsius" - B.Tech.    Supervisor     2018-19 Spring
  • Saurav Mishra (115MM0389), "A comparative study of corrosion behavior of iron-aluminium alloy with mild steel in sea water and acid media." - B.Tech.    Supervisor     2018-19 Spring
  • Saurav Mishra (115MM0389), "A comparative study of corrosion behavior of iron-aluminium alloy with mild steel in sea water and acid media." - B.Tech.    Supervisor     2019 Summer
  • Joy Beck (116MM0514), "WEAR BEHAVIOR OF POLYMER COMPOSITE LINER" - B.Tech.    Supervisor     2019-20 Spring
  • Priyam Pattnaik (116MM0539), "WEAR BEHAVIOR OF POLYMER COMPOSITE LINER" - B.Tech.    Supervisor     2019-20 Spring
  • Biswajit Kongadi (117MM0701), "Applications of Shape memory alloy in electrical and electronics" - B.Tech.    Supervisor     2020-21 Spring
  • Raj Manik (117MM0621), "Applications of Shape memory alloy in electrical and electronics" - B.Tech.    Supervisor     2020-21 Spring
  • Soumya Ranjan Swain (117MM0641), "Applications of Shape memory alloy in electrical and electronics" - B.Tech.    Supervisor     2020-21 Spring
  • Alok Ranjan Sahoo (710MM1097), "STUDY OF WEAR, AGING AND CORROSION BEHAVIOUR OF ALUMINIUM-3%MAGNESIUM-10%SILICON CARBIDE COMPOSITE" - B.Tech. M.Tech Dual Degree    Supervisor     2014-15 Spring

 Awards and Honours

Memberships / Fellowships
  • IIM, IIME, IEI, PSSI, IPA, MRSI,