Santosh Kumar Sahoo

Associate Professor

Metallurgical and Materials Engineering

 (+91) 661 246 2566 , 3566

 santoshsahoo[at]nitrkl.ac.in

 Biosketch

14

Publications       

0

Sponsored Projects

0

Consultancy Projects

7

Doctoral Students

0

Continuing Education

8

PG Dissertation

 Personal Information

Prof. Santosh Kumar Sahoo

Associate Professor

Metallurgical and Materials Engineering

Joined in Jul 2009

 Room Number: MM-000

 Department of Metallurgical and Materials Engineering, National Institute of Technology Rourkela, Sundargarh, Odisha, India - 769008

 Education Qualification

  1. PhD, IIT Bombay

 Experience

No Experience Found....

 Expertise Information

Research Group
Surface Engineering
Areas of Interest
Crystallographic Texture, Plastic Deformation, Microstructural Developments

 Projects

No Projects Found....

 Continuing Education

No Continuing Educations Found....

 Publications

Google Scholar h-index

Google Scholar i10-index

Scopus h-index

Total Publications: 14
L. Kumar, H. Singh, S. K. Sahoo, and S. N. Alam, "Effect of nanostructured Cu on microstructure, microhardness and wear behavior of Cu-xGnP composites developed using mechanical alloying", Journal of Composite Materials, vol.55, no.16, pp.2237-2248, SAGE Publications, January 2021, 10.1177/0021998320987887 Article
L. Kumar, S. K. Sahoo, and S. N. Alam, "Influence of Nanostructured Cu on the Mehanical Properties of Cu-MWCNTs Composites", International Journal of Materials Research, vol.111, no.6, pp.469-478, Hanser Verlag GmbH & Co KG, June 2020, 10.3139/146.111906 Article
P. Shrivastava, S. N. Alam, D. Panda, S. K. Sahoo, T. Maity, and K. Biswas, "Effect of addition of multiwalled carbon nanotube/graphite nanoplatelets hybrid on the mechanical properties of aluminium", Diamond and Related Materials, vol.104, no.107715, Elsevier, April 2020, 10.1016/j.diamond.2020.107715 Article
K. Kumar, M. Masanta, and S. K. Sahoo, "Microstructure evolution and metallurgical characteristic of bead-on-plate TIG welding of Ti-6Al-4V alloy", Journal of Materials Processing Technology, vol.265, pp.34-43, Elsevier, March 2019, 10.1016/j.jmatprotec.2018.10.002 Article
V. R. Talekar, A. Patra, S. K. Sahoo, S. K. Karak, and B. Mishra, "Fabrication and characterization of nano-Y2O3, Al2O3, La2O3 dispersed mechanically alloyed and liquid phase sintered W-Ni for structural application", International Journal of Refractory Metals and Hard Materials, vol.82, pp.183-198, Elsevier 2019, 10.1016/j.ijrmhm.2019.03.027 Article

Show All Publications(+)

V. R. Talekar, A. Patra, and S. K. Sahoo, "Oxidation behavior of oxide dispersion-strengthened W–Ni alloys", Oxidation of Metals, vol.93, pp.17-28, Springer 2019, 10.1007/s11085-019-09942-w Article
R., M., D., M. Kumar, and S. K. Sahoo, "Mechanism of texture and microstructure evolution during warm rolling of Ti–6Al–4V alloy", Philosophical Magazine, Taylor and Francis, July 2018, 10.1080/14786435.2018.1493237 Article
A. Pati, S. K. Sahoo, B. Mishra, and U., "Viscosity of industrial blast furnace slag in Indian scenario", Transactions of the Indian Institute of Metals, vol.71, no.4, pp.801-812, Springer, April 2018, 10.1007/s12666-017-1212-9 Article
B. Bishoyi, R. K. Sabat, and S. K. Sahoo, "Effect of temperature on microstructure and texture evolutions during uniaxial compression of commercially pure titanium", Materials Science and Engineering: A, vol.718, pp.398-411, Elsevier, March 2018, 10.1016/j.msea.2018.01.128 Article
A. Patra, R., S. K. Karak, and S. K. Sahoo, "Effect of nano Y2O3 dispersion on thermal, microstructure, mechanical and high temperature oxidation behavior of mechanically alloyed W-Ni-Mo-Ti", International Journal of Refractory Metals and Hard Materials, vol.70, pp.134-154, Elsevier, January 2018, 10.1016/j.ijrmhm.2017.09.015 Article
S. K. Sahoo, B. Bishoyi, U. K. Mohanty, S. K. Sahoo, J. Sahu, and R. N. Bathe, "Effect of laser beam welding on microstructure and mechanical properties of commercially pure Titanium", Transactions of the Indian Institute of Metals, vol.70, no.7, pp.1817–1825, Springer, September 2017, 10.1007/s12666-016-0976-7 Article
A. Patra, R. Saxena, S. K. Karak, T. Laha, and S. K. Sahoo, "Fabrication and characterization of nano-Y2O3 dispersed W-Ni-Mo and W-Ni-Ti-Nb alloys by mechanical alloying and spark plasma sintering", Journal of Alloys and Compounds, pp.1-6, Elsevier, December 2016, 10.1016/j.jallcom.2016.11.424 Article
S. K. Sahoo, S. Datta, and S. S. Mahapatra, "Appraisement and benchmarking of supply chain performance extent: a fuzzy grey relation method", Grey Systems: Theory and Application, vol.5, no.1, pp.2-30, February 2015, 10.1108/GS-10-2014-0036 Article
S. K. Sahoo, S. Datta, S. K. Patel, and S. S. Mahapatra, "Industrial supply chain performance benchmarking using fuzzy grey relation method", Global Journal of Management and Business Studies, vol.3, no.7, pp.775-784, Research India Publications, November 2013 Article

 Courses Taught

  • MM220 : Unit Process of Extraction {Theory}
  • MM3503 : Material Characterization Techniques {Theory}
  • MM352 : Material Characterization Techniques {Theory}
  • MM354 : Non – Metallic Materials {Theory}
  • MM359 : Engineering Polymers And Composites {Theory}
  • MM448 : Advanced Engineering Materials {Theory}
  • MM4510 : Advanced Processing of Materials {Theory}
  • MM603 : Experimental Technique in Materials Engineering {Theory}
  • MM606 : X - Ray and Electron Microscopy {Theory}
  • MM652 : Experimental Techniques in Materials Engineering {Theory}
  • MM6523 : Experimental Techniques in Materials Engineering {Theory}
  • MM2322 : Process MEtallurgy Laboratory {Practical}
  • MM270 : Electro Metallurgy and Corrosion Laboratory {Practical}
  • MM272 : Thermodynamics and Kinetics Laboratory {Practical}
  • MM371 : Thermodynamics and Kinetics Laboratory. {Practical}
  • MM6171 : Phase Transformation Laboratory {Practical}
  • MM627 : Process Metallurgy Laboratory {Practical}
  • MM6371 : Metallurgical Thermodynamics and Kinetics Laboratory {Practical}
  • MM6572 : Experimental Techniques in Materials Engineering Laboratory {Practical}
  • MM671 : Metallurgical Thermodynamics and Kinetics Laboratory {Practical}
  • MM672 : Experimental Techniques in Materials Engineering Laboratory {Practical}

 Research Scholars

Ph.D. Students [7]
Recrystallization Textures In Hcp Metals

 Surjyakant Panda

 Graduated  (2016)

 Supervisor

Numerical, Analytical And Experimental Analysis Of Combined Extrusion Forging Processes Applied To Collet Chuck Holders

 Srikar Potnuru

 Graduated  (2016)

 Co-Supervisor

Development Of Cu And Al-Based Metal Matrix Composites Using Graphite Nanoplatelets And Multiwalled Carbon Nanotubes As Reinforcement

 Lailesh Kumar

 Graduated  (2017)

 Co-Supervisor

Reduction Of Bauxite Through Hydrogen: Future Method Of Extraction Of Aluminium

 Bikash Ranjan Parhi

 Graduated  (2018)

 Supervisor

Effect Of Deformation Conditions On The Texture And Microstructure Evolution In Commercially Pure Titanium

 Bibhudutta Bishoyi

 Thesis Submitted

 Supervisor

Metallurgical And Materials Engg.

 Raviteja Vinjamuri

 OnGoing

 Supervisor

Recrystallization And Grain Growth Mechanisms In Magnesium And Its Alloys

 Deepankar Panda

 OnGoing

 Supervisor

Executive Ph.D. Students [2]
Process Metallurgy

 Aditya Shankar Routray

 OnGoing

 Supervisor

Texture Of Materials

 Adiraj Behera

 OnGoing

 Supervisor

M.Tech by Research Students [1]
Viscosity, Flow Characteristics And Microstructural Characterization Of Industrial Blast Furnace Slags

 Anindita Pati

 Graduated  (2014)

 Supervisor

 Dissertations

PG Dissertation
  • Honey Goel (213MM1467), "Residual stress developments during laser welding of commercially pure titanium sheets" - M.Tech.    Supervisor     2014-15 Spring
  • Jitendra Kumar Mishra (214MM2501), "Effect of cross-rolling on microstructure, texture and magnetic properties of cold rolled non-oriented electrical steels" - M.Tech.    Supervisor     2015-16 Spring
  • Sandeep Kumar Sahni (214MM1344), "Texture and microstructure development during hot rolling of CP-titanium" - M.Tech.    Supervisor     2015-16 Spring
  • Aakash D S (215MM2458), "Effect of strain path on Texture and Microstructure of Cold Rolled Non-Oriented Electrical Steel" - M.Tech.    Supervisor     2016-17 Spring
  • Mallampalli V S S D S Surya Pavan (215MM1430), "Effect of rolling temperature on the evolution of texture and microstructure of Ti-6Al-4V" - M.Tech.    Supervisor     2016-17 Spring
  • Malaya Kumar Debta (216MM1428), "Characterisation of Texture Evolution in Commercially Pure Titanium through VPSC Simulation: A Case Study to Investigate the Role of Strain-Paths on Texture Evolution" - M.Tech.    Supervisor     2017-18 Spring
  • Sunil Kumar Yadav (216MM1439), "Recrystallization Texture Evolution in Ti-6Al-4V Alloys." - M.Tech.    Supervisor     2017-18 Spring
  • Yogesh Singh (218MM1480), "Microstructure and Texture Evaluation during Static Annealing of Pure Magnesium" - M.Tech.    Supervisor     2019-20 Spring
UG Dissertation
  • Ashish Kumar (111MM0457), "AN INVESTIGATION ON EFFECT OF TEXTURE ON THE PLASTIC DEFORMATION OF CPTITANIUM" - B.Tech.    Supervisor     2014-15 Spring
  • Brahmananda Hota (111MM0363), "Nanoindentation Study of Pure Magnesium" - B.Tech.    Supervisor     2014-15 Spring
  • Nabodit Patra (111MM0576), "NANOINDENTATION STUDY OF PURE MAGNESIUM" - B.Tech.    Supervisor     2014-15 Spring
  • Pravat Kumar Sahoo (111MM0379), "NANOINDENTATION STUDY OF PURE MAGNESIUM" - B.Tech.    Supervisor     2014-15 Spring
  • Santosh Kumar (111MM0619), "AN INVESTIGATION ON EFFECT OF TEXTURE ON THE PLASTIC DEFORMATION OF CPTITANIUM" - B.Tech.    Supervisor     2014-15 Spring
  • David Livingstone Vodigunda (112MM0449), "XRD Analysis of Role of Strain-Paths on Hot Rolled Commercially Pure Titanium" - B.Tech.    Supervisor     2015-16 Spring
  • Rohit Jaiswal (112MM0400), "XRD Analysis of Hot Rolled Commercially Pure Titanium: Effect of Strain-Paths" - B.Tech.    Supervisor     2016 Summer
  • Ankit Shetty Bandaram (113MM0438), "AN INVESTIGATION ON EFFECT OF TEXTURE ON REDUCIBILITY OF IRON ORE" - B.Tech.    Supervisor     2016-17 Spring
  • Deepak Kumar Kalah (113MM0447), "AN INVESTIGATION ON EFFECT OF TEXTURE ON REDUCIBILITY OF IRON ORE" - B.Tech.    Supervisor     2016-17 Spring
  • Hrushikesh Sethi (113MM0468), "AN INVESTIGATION ON EFFECT OF TEXTURE ON REDUCIBILITY OF IRON ORE" - B.Tech.    Supervisor     2016-17 Spring
  • M. Sivaanantha Karthic (114MM0348), "Microstructural Characterization through ATOM Software: A Case study for Commercially Pure Titanium deformed through uniaxial tension" - B.Tech.    Supervisor     2017-18 Spring
  • Mintu Kumar (114MM0349), "Microstructural Characterization through ATOM Software: A Case study for Commercially Pure Titanium deformed through uniaxial tension" - B.Tech.    Supervisor     2017-18 Spring
  • Aditya Narayan Dash (115MM0486), "MICROSTRUCTURE AND TEXTURE EVOLUTION DURING WIRE DRAWING OF COMMERCIALLY PURE TITANIUM" - B.Tech.    Supervisor     2018-19 Spring
  • Sraban Kumar Behera (115MM0480), "MICROSTRUCTURE AND TEXTURE EVOLUTION DURING WIRE DRAWING OF COMMERCIALLY PURE TITANIUM" - B.Tech.    Supervisor     2018-19 Spring
  • Abhisek Srichandan (116MM0548), "Texture and Microstructure evaluation of Ti-6Al-4V during deformation under uniaxial compression test and to increase the ß grain size" - B.Tech.    Supervisor     2019-20 Spring
  • Boddeda Sravani (116MM0510), "Texture and Microstructure evaluation of Ti-6Al-4V Under uniaxial compression test and to increase the beta grain size" - B.Tech.    Supervisor     2019-20 Spring
  • Anirudh Venkateshanand Devalpally (117MM0796), "Effect of precipitates on the grain growth of Magnesium AM30 Alloy" - B.Tech.    Supervisor     2020-21 Spring
  • Satyaket Das (117MM0605), "Effect of precipitates on the grain growth of Magnesium AM30 Alloy" - B.Tech.    Supervisor     2020-21 Spring
  • Yatindra Kala (117MM0598), "Effect of precipitates on the grain growth of Magnesium AM30 Alloy" - B.Tech.    Supervisor     2020-21 Spring
  • Bismay Kumar Sahoo (714MM1032), "Fabrication of 2 vol. % MWCNTs reinforced Fe Metal Matrix Composite by Powder Metallurgy: Study of Effect of Milling on Physical, Microstructural and Mechanical Properties of Synthesized Composites." - B.Tech. M.Tech Dual Degree    Co-supervisor     2018-19 Spring
  • Panasa Rajesh (714MM1129), "Evolution of Microstructure and Texture in AM30 Alloy during Annealing" - B.Tech. M.Tech Dual Degree    Supervisor     2018-19 Spring
  • abhiram Kumar (715MM1152), "Development of Ag-based Alloys for Brazing Applications by Mechanical Alloying and Conventional Sintering" - B.Tech. M.Tech Dual Degree    Supervisor     2019-20 Spring
  • Surajbhan Jaiswal (715MM1151), "Evolution of Microstructure and Texture in Mg-3%Al- 0.2%Ce during Annealing." - B.Tech. M.Tech Dual Degree    Supervisor     2019-20 Spring

 Awards and Honours

Memberships / Fellowships
  • Indian Institute of Metals (IIM),