Debasis Chaira

Associate Professor

Metallurgical and Materials Engineering

 (+91) 661 246 2561 , 3561

 debasis[at]nitrkl.ac.in

 Biosketch

23

Publications       

4

Sponsored Projects

0

Consultancy Projects

6

Doctoral Students

2

Continuing Education

8

PG Dissertation

 Personal Information

Prof. Debasis Chaira

Associate Professor

Metallurgical and Materials Engineering

Joined in Oct 2007

 Room Number: CS-203

 Department of Metallurgical and Materials Engineering, National Institute of Technology Rourkela, Sundargarh, Odisha, India - 769008

 Education Qualification

  1. Ph.D. (IIT Kanpur)

 Experience

No Experience Found....

 Expertise Information

Research Group
Composites Materials
Areas of Interest
Nanomaterials, Physical Metallurgy, Composites

 Projects

Feasibility of utilizing magnesite deposite of Lakuridada at Lakuri, Nepal.

 United Cements Private Limited

 Principal Investigator

 12 months

 Running

Sponsored

FABRICATION OF TI-TIC METAL MATERIX COMPOSITE FROM WASTE TICHIPS

 CSIR

 Principal Investigator

 36 months

 Running

Sponsored

Synthesis of Cu-Graphite metal matrix composite by powder metallurgy route for electrical contact application

 SERB

 Principal Investigator

 36 months

 Completed

Sponsored

Synthesis of nanostructured stainless steel powder by high energy milling and subsequent spark plasma sintering for novel applocation.

 CSIR

 Principal Investigator

 36 months

 Completed

Sponsored

 Continuing Education

SHORT TERM COURSE ON POWDER METALLURGY: FUNDAMENTALS, APPLICATIONS AND ADVANCEMENT

 Metallurgical and Materials Engineering

 Coordinator

 01 Jul 2019 - 05 Jul 2019

Short-term Course

National Conference on Processing and Characterization of Materials (NCPCM–2016)

 Metallurgical and Materials Engineering

 Coordinator

 09 Dec 2016 - 10 Dec 2016

Conference

 Publications

Google Scholar h-index

Google Scholar i10-index

9

Scopus h-index

Total Publications: 23
P. J. Teja, S. R. Shial, D. Chaira, and M. Masanta, "Development and characterization of Ti-TiC composites by powder metallurgy route using recycled machined Ti chips", Materials Today: Proceedings, vol.26, no.part 2, pp.3292-3296, Elsevier 2020, 10.1016/j.matpr.2020.02.467 Article
S. R. Shial, M. Masanta, and D. Chaira, "Recycling of waste Ti machining chips by planetary milling: generation of Ti powder and development of in situ TiC reinforced Ti-TiC composite powder mixture", Powder Technology, vol.329, pp.232–240, Elsevier, April 2018, 10.1016/j.powtec.2018.01.080 Article
P. Sahani and D. Chaira, "Nonlubricated sliding wear behavior study of SiC–B4C–Si cermet against a diamond indenter", Journal of Tribology, vol.139, no.5, pp.13, ASME 2017, 10.1115/1.4035344 Article
R. Shashanka, D. Chaira, and D. Chakravarty, "Fabrication of Nano-Yttria dispersed duplex and Ferritic stainless steels by planetary milling followed by spark plasma sintering and non-lubricated sliding wear behaviour study", Journal of Materials Science and Engineering B, vol.6, no.5-6, pp.111-125, David Publishing, November 2016, 10.17265/2161-6221/2016.5-6.001 Article
P. Sahani, S. K. Karak, B. Mishra, D. Chakravarty, and D. Chaira, "A comparative study on SiC-B4C-Si cermet prepared by pressureless Sintering and spark plasma sintering methods", Metallurgical and Materials Transactions A, vol.47, no.6, pp.3065-3076, Springer, June 2016, 10.1007/s11661-016-3401-2 Article

Show All Publications(+)

P. Sahani, S. K. Karak, B. Mishra, D. Chakravarty, and D. Chaira, "Effect of Al addition on SiC-B4C cermet prepared by pressureless sintering and spark plasma sintering methods", International Journal of Refractory Metals and Hard Materials, vol.57, pp.31-41, Elsevier, June 2016, 10.1016/j.ijrmhm.2016.02.005 Article
P. Sahani, S. K. Karak, B. Mishra, D. Chakravarty, and D. Chaira, "Effect of Al addition on SiC–B4C cermet prepared by pressureless sintering and spark plasma sintering methods", International Journal of Refractory Metals and Hard Materials, vol.57, pp.31-41, Elsevier, June 2016, 10.1016/j.ijrmhm.2016.02.005 Article
A. K. Nayak, S. R, and D. Chaira, "Effect of nanosize Yittria and Tungsten addition to duplex stainless steel during high energy planetary milling", in 5th National Conference on Processing and Characterization of Materials, vol.115, no.1, pp.1-9, IOP Publishing, materials science and engineering, NIT, Rourkela, March 2016, 10.1088/1757-899X/115/1/012008 Inproceedings
S. R, D. Chaira, and B., "Fabrication of yttria dispersed duplex stainless steel electrode to determine dopamine, ascorbic and uric acid electrochemically by using cyclic voltammetry", International Journal of Scientific & Engineering Research, vol.7, no.3, pp.1275-1284, IJSER, March 2016 Article
S. R and D. Chaira, "Effects of nano-Y2O3 and sintering parameters on the fabrication of PM duplex and ferritic stainless steels", Acta Metallurgica Sinica (English Letters), vol.29, no.1, pp.58-71, Elsevier, January 2016, 10.1007/s40195-015-0362-1 Article
S. R and D. Chaira, "Optimization of milling parameters for the synthesis of nano-structured duplex and ferritic stainless steel powders by high energy planetary milling", Powder Technology, vol.278, pp.35-45, Elsevier, July 2015, 10.1016/j.powtec.2015.03.007 Article
S. R and D. Chaira, "Development of nano-structured duplex and ferritic stainless steels by pulverisette planetary milling followed by pressureless sintering", Materials Characterization, vol.99, pp.220-229, Elsevier, January 2015, 10.1016/j.matchar.2014.11.030 Article
S. R, D. Chaira, and B., "Electrocatalytic response of duplex and yittria dispersed duplex stainless steel modified carbon paste electrode in detecting folic acid using cyclic voltammetry", International Journal of Electrochemical Science, vol.10, no.7, pp.5586-5598, Electrochemical Science Group, December 2015 Article
T. Mandal, B. K. Mishra, A. Garg, and D. Chaira, "Optimization of milling parameters for the mechanosynthesis of nanocrystalline hydroxyapatite", Powder Technology, vol.253, pp.650-656, Elsevier, February 2014, 10.1016/j.powtec.2013.12.026 Article
G. Parida, D. Chaira, and A. Basu, "Ni-ZrO2 composite coating by electro-co-deposition", Transactions of the Indian Institute of Metals, vol.66, no.1, pp.5-11, Springer, November 2013, 10.1007/s12666-012-0161-6 Article
K. Dash, B. C. Ray, and D. Chaira, "Synthesis and characterization of copper-alumina metal matrix composite by conventional and spark plasma sintering", Journal of Alloys and Compounds, vol.516, pp.78-84, Elsevier, March 2012, 10.1016/j.jallcom.2011.11.136 Article
D. Chaira, S. Sangal, and B., "Efficient synthesis and characterization of nanostructured TiC powder by reaction milling", Transactions of the Indian Institute of Metals, vol.64, no.6, pp.549-554, Springer, December 2011, 10.1007/s12666-011-0080-y Article
G. Parida, D. Chaira, M. Chopkar, and A. Basu, "Synthesis and characterization of Ni-TiO2 composite coatings by electro-co-deposition", Surface and Coatings Technology, vol.205, no.21-22, pp.4871-4879, Elsevier, August 2011, 10.1016/j.surfcoat.2011.04.102 Article
G. Parida, D. Chaira, M. Chopkar, and A. Basu, "Synthesis and characterization of Ni-TiO2 composite coatings by electro-co-deposition", Surface and Coatings Technology, vol.205, no.21-22, pp.4871-4879, Elsevier, August 2011, 10.1016/j.surfcoat.2011.04.102 Article
S. Samal, B. Satpati, and D. Chaira, "Production and dispersion stability of ultrafine Al-Cu alloy powder in base fluid", Journal of Alloys and Compounds, vol.504, pp.s389-s394, Elsevier, August 2010, 10.1016/j.jallcom.2010.03.223 Article
D. Chaira, B. Mishra, and S. Sangal, "Efficient synthesis and characterization of iron carbide powder by reaction milling", Powder Technology, vol.191, no.1-2, pp.149-154, Elsevier 2009, 10.1016/j.powtec.2008.09.020 Article
D. Chaira, B. Mishra, and S. Sangal, "Magnetic properties of cementite powder produced by reaction milling", Journal of Alloys and Compounds, vol.474, no.1-2, pp.396-400, Elsevier 2009, 10.1016/j.jallcom.2008.06.099 Article
D. Chaira, B. Mishra, and S. Sangal, "Synthesis and characterization of silicon carbide by reaction milling in a dual-drive planetary mill", Materials Science and Engineering: A, vol.460-461, pp.111-120, Elsevier 2007, 10.1016/j.msea.2007.01.080 Article

 Courses Taught

  • MM2107 : Basic Physical Metallurgy {Theory}
  • MM257 : Non Metallic Materials {Theory}
  • MM357 : Corrosion and Degradation of Materials and Their Prevention {Theory}
  • MM358 : Experimental Techniques in Materials Engineering {Theory}
  • MM358 : Expermental Techniques in Materials Engineering {Theory}
  • MM449 : Nanostructured Materials {Theory}
  • MM4512 : Materials Characterization Techniques {Theory}
  • MM606 : X - Ray and Electron Microscopy {Theory}
  • MM6112 : Phase Transformation {Theory}
  • MM615 : Structure and Properties of Materials {Theory}
  • MM642 : Materials Engineering {Theory}
  • MM652 : Experimental Techniques in Materials Engineering {Theory}
  • MM6521 : Powder Technology {Theory}
  • MM665 : Powder Technology {Theory}
  • MM271 : Mineral Dressing Laboratory {Practical}
  • MM273 : Polymer Laboratory {Practical}
  • MM3521 : Characterization of Materials Laboratory {Practical}
  • MM672 : Experimental Techniques in Materials Engineering Laboratory {Practical}
  • MM674 : Material Science Laboratory {Practical}

 Research Scholars

Ph.D. Students [6]
Fabrication Of Nano-Structured Duplex And Ferritic Stainless Steel By Planetary Milling Followed By Consolidation

 Shashanka R

 Graduated  (2015)

 Supervisor

Fabrication Of Sic-B4c-Si And Sic-B4c-Al Cermets By Powder Metallurgy Route

 Pankajini Sahani

 Graduated  (2016)

 Supervisor

W-Si Alloy

 Vadla Suman

 OnGoing

 Supervisor

Metallurgical Engg

 Bhabani Shankar Meher

 OnGoing

 Supervisor

Metallurgical And Materials Engg.

 Sushree Sefali Mishra

 OnGoing

 Supervisor

Ceramic-Metal Composites

 Rashmi Ranjan Rout

 OnGoing

 Supervisor

Executive Ph.D. Students [1]
Powder Metallurgy

 Jayram Barik

 OnGoing

 Supervisor

 Dissertations

PG Dissertation
  • Arabinda Meher (213MM1472), "Synthesis and Characterization of Cu-graphite-SiC Hybrid Metal Matrix Composite Prepared by Powder Metallurgy Route" - M.Tech.    Supervisor     2014-15 Spring
  • Avinas Kumar Nayak (214MM1341), "Effect of compact height and compaction pressure on densification of tungsten dispersed and yttria dispersed duplex stainless steel fabricated by high energy planetary milling followed by conventional sintering" - M.Tech.    Supervisor     2015-16 Spring
  • Biswajita Mishra (215MM2245), "Deformation behaviour study of Cu-graphite, Cu-graphite-SiC metal matrix composite prepared by powder metallurgy" - M.Tech.    Supervisor     2016-17 Spring
  • Goudu Ravi Kiran (216MM1432), "Fabrication of Iron-Copper-graphite alloy by powder metallurgy for automobile applications" - M.Tech.    Supervisor     2017-18 Spring
  • Pradeep Kumar Prajapati (216MM2452), "FABRICATION OF COPPER - BORON CARBIDE COMPOSITES BY POWDER METALLURGY" - M.Tech.    Supervisor     2017-18 Spring
  • Shiv Kumar (217MM1453), "Fabrication and Characterization of Si3N4-Mo-Al Cermet with Different wt. % of Sintering Additives" - M.Tech.    Supervisor     2018-19 Spring
  • N Wilson Singh (218MM1474), "Fabrication and characterization of TiC- Stainless steel cermet by melt infiltration" - M.Tech.    Supervisor     2019-20 Spring
  • Naveen S Das (219MM1576), "Recycling of Al 8011 Alloy chips using powder metallurgy route" - M.Tech.    Supervisor     2020-21 Spring
UG Dissertation
  • Akash Agarwal (111MM0386), "SYNTHESIS OF IRON OXIDE PIGMENT BY PLANETARY MILLING" - B.Tech.    Supervisor     2014-15 Spring
  • Mani Bhushan (111MM0358), "SYNTHESIS OF IRON OXIDE PIGMENT BY PLANETARY MILLING" - B.Tech.    Supervisor     2014-15 Spring
  • Akash Ranjan Pradhan (112MM0441), "Utilization of Steel Scrap through Powder Metallurgy Route" - B.Tech.    Supervisor     2015-16 Spring
  • Shivam Sisodiya (112MM0475), "Utilization of Steel Scrap through Powder Metallurgy Route" - B.Tech.    Supervisor     2015-16 Spring
  • Sriharsha Mangu (110MM0523), "Utilization of Steel Scrap through Powder Metallurgy Route" - B.Tech.    Supervisor     2015-16 Spring
  • Nihar Ranjan Panigrahi (113MM0457), "Synthesis and Characterization of Titanium Carbide and Iron Carbide from elemental powders." - B.Tech.    Supervisor     2016-17 Spring
  • Sohan Kumar Sahoo (113MM0462), "Synthesis and Characterization of Titanium Carbide and Iron Carbide from elemental powders." - B.Tech.    Supervisor     2016-17 Spring
  • Kamma Sai Venkat (113MM0433), "Combustion Synthesis of Titanium Carbide from Titanium and Graphite Powder" - B.Tech.    Supervisor     2017 Summer
  • K Chandan Rao (114MM0266), "Fabrication and characterization of Ti-TiC Metal Matrix Composite by Mechanical Alloying" - B.Tech.    Supervisor     2017-18 Spring
  • Mukesh Kumbhakar (114MM0258), "Fabrication and characterization of Ti-TiC Metal Matrix Composite by Mechanical Alloying" - B.Tech.    Supervisor     2017-18 Spring
  • Abhishek Patra (115MM0667), "Fabrication of 0.5 vol. % MWCNTs reinforced Fe Metal Matrix Composite by Powder Metallurgy: Study of Effect of Milling Medium and Sintering Temperature on Physical, Microstructural and Mechanical Properties of Synthesized Composites" - B.Tech.    Supervisor     2018-19 Spring
  • Nitesh Kumar Gouda (115MM0491), "Fabrication of 0.5 vol. % MWCNTs reinforced Fe Metal Matrix Composite by Powder Metallurgy: Study of Effect of Milling Medium and Sintering Temperature on Physical, Microstructural and Mechanical Properties of Synthesized Composites" - B.Tech.    Supervisor     2018-19 Spring
  • Pratyush Ranjan Samantaray (115MM0512), "Fabrication of 0.5 vol. % MWCNTs reinforced Fe Metal Matrix Composite by Powder Metallurgy: Study of Effect of Milling Medium and Sintering Temperature on Physical, Microstructural and Mechanical Properties of Synthesized Composites" - B.Tech.    Supervisor     2018-19 Spring
  • Abhishek Behera (116MM0515), "Fabrication of MWCNTs reinforced Fe Metal Matrix Composite by Powder Metallurgy" - B.Tech.    Supervisor     2019-20 Spring
  • Banoth Bhavani (116MM0520), "Fabrication of MWCNTs reinforced Fe Metal Matrix Composite by Powder Metallurgy" - B.Tech.    Supervisor     2019-20 Spring
  • Gondu Naveen (116MM0535), "Development of Oxide Dispersion Strengthened Alloys by Powder Metallurgy: Study of the Effect of Milling Time and Medium on the Mechanical and Microstructural Properties of the Fabricated Alloys" - B.Tech.    Supervisor     2019-20 Spring
  • Prabhudananda Das (116MM0522), "Fabrication of MWCNTs reinforced Fe Metal Matrix Composite by Powder Metallurgy" - B.Tech.    Supervisor     2019-20 Spring
  • Sachin Indlia (116MM0525), "Development of Oxide Dispersion Strengthened Alloys by Powder Metallurgy: Study of the Effect of Milling Time and Medium on the Mechanical and Microstructural Properties of the Fabricated Alloys" - B.Tech.    Supervisor     2019-20 Spring
  • Ankit Sahoo (117MM0636), "Fabrication of Fe MWCNT metal matrix composite via Powder Metallurgy Route" - B.Tech.    Supervisor     2020-21 Spring
  • Chinmay Kabi (117MM0596), "Fabrication of Fe MWCNT metal matrix composite via Powder Metallurgy Route" - B.Tech.    Supervisor     2020-21 Spring
  • Harsh Khirwal (117MM0613), "Fabrication of Fe MWCNT metal matrix composite via Powder Metallurgy Route" - B.Tech.    Supervisor     2020-21 Spring
  • Shalabh Gupta (710MM1169), "Synthesis of nano-structured Duplex and Ferritic stainless steel powders by planetary milling: An experimental and simulation study" - B.Tech. M.Tech Dual Degree    Supervisor     2014-15 Spring
  • Prasanna Verma (712MM1162), "Utilization of Waste Steel Chips in Powder Metallurgy" - B.Tech. M.Tech Dual Degree    Supervisor     2016-17 Spring
  • Bushra Negar Alam (713MM1108), "Recycling of waste Titanium chips: Synthesis of Titanium Powder and Ti-TiCnanocomposites by planetary milling followed by Spark Plasma Sintering" - B.Tech. M.Tech Dual Degree    Supervisor     2017-18 Spring
  • Bismay Kumar Sahoo (714MM1032), "Fabrication of 2 vol. % MWCNTs reinforced Fe Metal Matrix Composite by Powder Metallurgy: Study of Effect of Milling on Physical, Microstructural and Mechanical Properties of Synthesized Composites." - B.Tech. M.Tech Dual Degree    Supervisor     2018-19 Spring
  • Sridhar Parida (715MM1155), "Fabrication and Characterization of TiC-Steel Cermet by Powder Technology route" - B.Tech. M.Tech Dual Degree    Supervisor     2019-20 Spring
  • Sridhar Parida (715MM1155), "Fabrication and Characterization of TiC-Steel Cermet by Powder Technology route" - B.Tech. M.Tech Dual Degree    Supervisor     2020 Summer

 Awards and Honours

Memberships / Fellowships
  • Indian Institute of Metals, The Institution of Engineers (India),