Bankim Chandra Ray

Professor HAG

Metallurgical and Materials Engineering

 (+91) 661 246 2559 , 3559

 bcray[at]nitrkl.ac.in

 Biosketch

133

Publications       

9

Sponsored Projects

0

Consultancy Projects

15

Doctoral Students

1

Continuing Education

13

PG Dissertation

 Personal Information

Prof. Bankim Chandra Ray

Professor HAG

Metallurgical and Materials Engineering

Joined in Jun 1989

 Room Number: MS-219

 Department of Metallurgical and Materials Engineering, National Institute of Technology Rourkela, Sundargarh, Odisha, India - 769008

 Education Qualification

  1. Ph.D. (IIT Kharagpur)

 Experience

No Experience Found....

 Expertise Information

Research Group
Composites Materials
Areas of Interest
Physical Metallurgy, Polymer Composites

 Projects

Moister uptake kinetics and its subsequent effect on mechanical performance of nano-phased fibrous polymeric composite

 CSIR

 Co-Investigator

 36 months

 Running

Sponsored

EFFECT OF HYGROTHERMAL CONDITIONING AND CYCLING ON CNT EMBEDDED GFRP COMPOSITE:A STUDY ON MARINE ENVIRONMENT DURABILITY.

 DRDO

 Co-Investigator

 36 months

 Running

Sponsored

Effect of hygrothermal conditioning and cycling on cnt embedded gfrp composite:a study on marine environment durability.

 DRDO

 Co-Investigator

 36 months

 Running

Sponsored

The effect of shock wave, moisture and sea on de-bonding of multilayer in FRP composite systems-experimental and multi-scale modeling based investigation

 DRDO

 Co-Investigator

 36 months

 Running

Sponsored

Prodding the magnetic behaviour of Sono-Electroplated nano structured Co/Cu and Ni/Cu magnetic alloy thin films by scanning probes.

 CSIR

 Co-Investigator

 36 months

 Completed

Sponsored

Analysis and Manipulation of structures and properties of sono-elecrochemical deposited nano-structured metallic thin films synthesized at low bath temperature

 SERB

 Co-Investigator

 36 months

 Completed

Sponsored

Failure Assessment of FRP Composite materials at low and high temperatures under different loading speeds

 CSIR

 Principal Investigator

 36 months

 Completed

Sponsored

Neutralization of redmud through a OST effective method and utilization of redmud in removal of arsenic, zinc, cadmium metal ions from their aqueous solutions.

 CSIR

 Principal Investigator

 36 months

 Completed

Sponsored

Thermal shocks on polymerization and depolymerizations of polymeric composites.

 MHRD

 Principal Investigator

 29 months

 Completed

Sponsored

 Continuing Education

Materials Technology: Advanced Processes and Characterizations

 Metallurgical and Materials Engineering

 Coordinator

 10 Dec 2009 - 11 Dec 2009

Short-term Course

 Publications

Google Scholar h-index

Google Scholar i10-index

14

Scopus h-index

Total Publications: 133
A. O. Fulmali, B. A. Nayak, B., S. Dasari, R. K. Prusty, and B. C. Ray, "Effect of 1D carbon nano- tube and fiber reinforcement on the long-term creep performance of glass fiber/epoxy composite using the time-temperature superposition principle", in Materials Today Proceedings, Elsevier, July 2021, 10.1016/j.matpr.2021.06.451 Inproceedings
S. S. Dash, P. K. Gangineni, B., S. Dasari, R. K. Prusty, and B. C. Ray, "Evaluation of mechanical behaviour of graphene oxide grafted CFRP composites: a comparison of anodic and cathodic EPD", Advances in Materials and Processing Technologies, Taylor & Francis, June 2021, 10.1080/2374068X.2021.1945272 Article
S. Lohani, . Shubham, R. K. Prusty, and B. C. Ray, "Effect of ultraviolet radiations on interlaminar shear strength and thermal properties of glass fiber/epoxy composites", January 2021, 10.1016/j.matpr.2020.12.028 Proceedings
B., H. M. M, B. C. Ray, and R. K. Prusty, "Improved mechanical responses of GFRP composites with epoxy-vinyl ester interpenetrating polymer network", Polymer Testing, Elsevier 2021, 10.1016/j.polymertesting.2020.107008 Article
B., H. M. M, A. O. Fulmali, R. K. Prusty, and B. C. Ray, "Multimaterial laminated composites: An assessment of effect of stacking sequence on flexural response", in Materials Today Proceedings, vol.44, pp.141-145, Elsevier 2021, 10.1016/j.matpr.2020.08.547 Inproceedings

Show All Publications(+)

S. Gupta, R. K. Prusty, B. C. Ray, and S. Pal, "Strength degradation and fractographic analysis of carbon fiber reinforced polymer composite laminates with square / circular hole using scanning electron microscope micrographs", Journal of Applied Polymer Science, vol.138, no.8, pp.49878 2021, https://doi.org/10.1002/app.49878 Article
S. De, A. O. Fulmali, K. C. Nuli, R. K. Prusty, and B. C. Ray, "Improving delamination resistance of carbon fiber reinforced polymeric composite by interface engineering using carbonaceous nanofillers through electrophoretic deposition: An assessment at different in-service temperatures", Journal of Applied Polymer Science, November 2020, 10.1002/app.50208 Article
S. Gupta, R. K. Prusty, B. C. Ray, and S. Pal, "Strength degradation and fractographic analysis of carbon fiber reinforced polymer composite laminates with square / circular hole using scanning electron microscope micrographs", Journal of Applied Polymer Science, November 2020, 10.1002/app.49878 Article
B. C. Ray, R. K. Prusty, and D. Nayak, "Phase Transformations and Heat Treatments of Steels", CRC Press, June 2020, 10.1201/9780429019210 Book
S. Pal and B. C. Ray, "Molecular Dynamics Simulation of Nanostructured Materials An Understanding of Mechanical Behavior", CRC Press, May 2020 Book
Y. Sagar, P. K. Gangineni, S. De, B. C. Ray, and R. K. Prusty, "Effect of Bath Concentration during Electrophoretic Deposition on the Interfacial Behaviour of Hybrid CFRP Composites", in Materials Science Forum, no.978, pp.304-310, Scientific.net, February 2020, 10.4028/www.scientific.net/MSF.978.304 Inproceedings
K. K. Mahato, K. C. Nuli, K. Dutta, R. K. Prusty, and B. C. Ray, "Thermal shock effect of Nano-TiO2 enhanced glass fiber reinforced polymeric composites: an assessment on tensile and thermal behavior", in Materials Science Forum, vol.978, pp.277-283, Scientific.net, February 2020, 10.4028/www.scientific.net/MSF.978.277 Inproceedings
Y. Sagar, P. K. Gangineni, S. Ramamoorthy, B. C. Ray, and R. K. Prusty, "Effects of electrophoretic deposition process parameters on the mechanical properties of graphene carboxyl-grafted carbon fiber reinforced polymer composite", Journal of Applied Polymer Science, vol.137, pp.48925, Wiley, January 2020, 10.1002/app.48925 Article
B. Sen, A. O. Fulmali, B., R. K. Prusty, and B. C. Ray, "A study of the effect of carbon nanotube/nanoclay binary nanoparticle reinforcement on glass fibre/epoxy composites", Materials Today Proceedings, vol.26, pp.2026-2031, Elsevier 2020, 10.1016/j.matpr.2020.02.440 Article
D. K. Rathore, R. K. Prusty, and B. C. Ray, "An Assessment of Mechanical Performance of CNF Modified Glass Fiber/Epoxy Composites under Elevated Temperatures", Materials Science Forum, Scientific.net 2020, 10.4028/www.scientific.net/MSF.978.311 Article
B., H. M. M, R. K. Prusty, and B. C. Ray, "Development of advanced fiber-reinforced polymer composites by polymer hybridization technique: Emphasis on cure kinetics, mechanical, and thermomechanical performance", Journal of Applied Polymer Science, vol.137, pp.49318, Wiley 2020, 10.1002/app.49318 Article
B., H. M. M, R. K. Prusty, and B. C. Ray, "Development of advanced fiber-reinforced polymer composites by polymer hybridization technique: Emphasis on cure kinetics, mechanical, and thermomechanical performance", Journal of Applied Polymer Science 2020, 10.1002/app.49318 Article
A. Yadav, B., A. O. Fulmali, R. K. Prusty, and B. C. Ray, "Effect of cure kinetics and nanomaterials on glass fiber/vinyl ester composites: An assessment on mechanical, thermal and fracture morphology", Materials Today Proceedings, Elsevier 2020, 10.1016/j.matpr.2020.02.683 Article
S. Patnaik, P. K. Gangineni, B. C. Ray, and R. K. Prusty, "Effect of graphene-based nanofillers addition on the interlaminar performance of CFRP composites: An assessment of cryo-conditioning", Materials Today Proceedings, Elsevier 2020, 10.1016/j.matpr.2020.02.846 Article
H. M. M, B., B. Sen, R. K. Prusty, and B. C. Ray, "Effect of in-situ temperature variation on mechanical response of glass/vinyl ester composites", Materials Today Proceedings, vol.27, pp.1142-1146, Elsevier 2020, 10.1016/j.matpr.2020.01.595 Article
B. A. Nayak, . Shubham, R. K. Prusty, and B. C. Ray, "Effect of nanosilica and nanoclay reinforcement on flexural and thermal properties of glass fiber/epoxy composites", Materials Today Proceedings, Elsevier 2020, 10.1016/j.matpr.2020.02.852 Article
K. K. Mahato, D. K. Rathore, K. Dutta, R. K. Prusty, and B. C. Ray, "Effect of severely thermal shocked nano-Al2O3 filled glass fiber reinforced polymeric composites: An assessment on tensile, thermal and morphological behaviour", Materials Today Proceedings, Elsevier 2020, 10.1016/j.matpr.2020.03.334 Article
B., A. Yadav, H. M. M, R. K. Prusty, and B. C. Ray, "Enhancement of mechanical properties of glass fiber reinforced vinyl ester composites by embedding multi-walled carbon nanotubes through solution processing technique", Materials Today Proceedings, vol.27, pp.1045-1050, Elsevier 2020, 10.1016/j.matpr.2020.01.391 Article
S. Dasari, S. Saurabh, S. Gupta, B. C. Ray, and R. K. Prusty, "Experimental amelioration of flexural behavior under cryogenic conditioning through inter-ply fiber hybridization in FRP composites", Materials Today Proceedings, vol.27, pp.1618-1624, Elsevier 2020, 10.1016/j.matpr.2020.03.336 Article
B., H. M. M, B. C. Ray, and R. K. Prusty, "Improved mechanical responses of GFRP composites with epoxy-vinyl ester interpenetrating polymer network", polymer testing, vol.93, pp.107008 2020, 10.1016/j.polymertesting.2020.107008 Article
B., H. M. M, B. Sen, R. K. Prusty, and B. C. Ray, "Influence of loading rate on adhesively bonded Tin-glass/epoxy single lap joint", Materials Today Proceedings, vol.26, pp.1850-1854, Elsevier 2020, 10.1016/j.matpr.2020.02.406 Article
S. De, A. O. Fulmali, P. Shivangi, S. Choudhury, R. K. Prusty, and B. C. Ray, "Interface modification of carbon fiber reinforced epoxy composite by hydroxyl/carboxyl functionalized carbon nanotube", Materials Today Proceedings, vol.27, pp.1473-1478, Elsevier 2020, 10.1016/j.matpr.2020.02.970 Article
S. Patnaik, P. K. Gangineni, A. Panda, R. K. Prusty, and B. C. Ray, "Interlaminar performance of graphene carboxyl modified CFRP composites: Effect of cryogenic conditioning", Materials Today Proceedings, vol.27, pp.1516-1521, Elsevier 2020, 10.1016/j.matpr.2020.03.166 Article
B., H. M. M, A. O. Fulmali, R. K. Prusty, and B. C. Ray, "Investigation of adhesively bonded multi-material joints: An assessment on joint efficiency and fracture morphology", Materials Today Proceedings, vol.27, pp.1180-1185, Elsevier 2020, 10.1016/j.matpr.2020.02.074 Article
A. Jena, . Shubham, R. K. Prusty, and B. C. Ray, "Mechanical and thermal behaviour of multi-layer graphene and nanosilica reinforced glass Fiber/Epoxy composites", Materials Today Proceedings, Elsevier 2020, 10.1016/j.matpr.2020.02.879 Article
H. M. M, B., R. K. Prusty, and B. C. Ray, "Mechanical and thermal performance of recycled glass fiber reinforced epoxy composites embedded with carbon nanotubes", Materials Today Proceedings, Elsevier 2020, 10.1016/j.matpr.2020.02.838 Article
S. Dasari, S. Saurabh, K. K. Mahato, R. K. Prusty, and B. C. Ray, "Mechanical properties of glass/carbon inter-ply hybrid polymer composites at different in-situ temperatures", Materials Today Proceedings, Elsevier 2020, 10.1016/j.matpr.2020.03.555 Article
S. Saurabh, S. Dasari, B. C. Ray, and R. K. Prusty, "Mode I interlaminar fracture toughness improvement of the glass/epoxy composite by using multiscale composite approach", Materials Today Proceedings, Elsevier 2020, 10.1016/j.matpr.2020.03.023 Article
A. O. Fulmali, B. Sen, B. C. Ray, and R. K. Prusty, "Effects of carbon nanotube/polymer interfacial bonding on the long-term creep performance of nanophased glass fiber/epoxy composites", Polymer Composites, Wiley, September 2019, 10.1002/pc.25381 Article
K. Rani, A. O. Fulmali, R. K. Prusty, and B. C. Ray, "Effects of acid, alkaline, and seawater aging on the mechanical and thermomechanical properties of glass fiber/epoxy composites filled with carbon nanofibers", Journal of Applied Polymer Science, vol.136, Wiley, August 2019, 10.1002/app.48434 Article
P. K. Gangineni, Y. Sagar, S. K. Ghosh, A. Anand, R. K. Prusty, and B. C. Ray, "Mechanical behavior of Graphene decorated carbon fiber reinforced polymer composites: an assessment of the influence of functional groups", Composites Part A: Applied Science and Manufacturing, vol.122, pp.36-44, Elsevier, July 2019, 10.1016/j.compositesa.2019.04.017 Article
S. Pal, Md. Meraj, S. Mishra, and B. C. Ray, "Influence of stress on creep behavior of Ni60Zr40 glass-reinforced Ni nanocomposite investigated by atomistic simulations", Transactions of the Indian Institute of Metals, pp.1-9, Springer, June 2019, 10.1007/s12666-019-01755-4 Article
N. Sharma, S. N. Alam, B. C. Ray, S. Yadav, and K. Biswas, "Alumina–MWCNT composites: microstructural characterization and mechanical properties", Journal of Asian Ceramic Societies, vol.7, no.1, pp.1-19, Taylor & Francis, January 2019, 10.1080/21870764.2018.1552235 Article
A. Anand, P. Banerjee, D. Sahoo, D. K. Rathore, R. K. Prusty, and B. C. Ray, "Effects of temperature and load on the creep performance of CNT reinforced laminated glass fiber/epoxy composites", International Journal of Mechanical Sciences, vol.150, pp.539-547, Elsevier, January 2019, 10.1016/j.ijmecsci.2018.09.048 Article
K. K. Mahato, K. Dutta, and B. C. Ray, "Assessment of mechanical, thermal and morphological behavior of nano-Al2O3 embedded glass fiber/epoxy composites at in-situ elevated temperatures", Composites Part B: Engineering, vol.166, pp.688-700, Elsevier 2019, 10.1016/j.compositesb.2019.03.009 Article
S. R. Nomula, D. K. Rathore, B. C. Ray, and R. K. Prusty, "Creep performance of CNT reinforced glass fiber/epoxy composites: roles of temperature and stress", Journal of Applied Polymer Science, vol.136, pp.1-15, Wiley 2019, 10.1002/APP.47674 Article
N. Sharma, S. N. Alam, and B. C. Ray, "Fundamentals of Spark Plasma Sintering (SPS): An Ideal Processing Technique for Fabrication of Metal Matrix Nanocomposites", Spark Plasma Sintering of Materials, ch.2, pp.21-60, Springer 2019, 10.1007/978-3-030-05327-7 Inbook
. Shubham, R. K. Prusty, and B. C. Ray, "Mechanical modelling and experimental validation of woven composites", Materials Today Proceedings, vol.27, pp.2640, Elsevier 2019, https://doi.org/10.1016/j.matpr.2019.11.082 Article
K. C. Nuli, A. O. Fulmali, N. J. Krishna, B. Sen, K. K. Mahato, R. K. Prusty, and B. C. Ray, "Synergetic Impact of Carbon Nanotube and/or Graphene Reinforcement on the Mechanical Performance of Glass Fiber/Epoxy Composite", Materials Science Forum, vol.978, pp.284-290, Scientific.net 2019, 10.4028/www.scientific.net/MSF.978.284 Article
S. Pal, S. Mishra, Md. Meraj, A. Mondal, and B. C. Ray, "On the comparison of interrupted and continuous creep behaviour of nanocrystalline copper: a molecular dynamics approach", Materials Letters, vol.229, pp.256-260, Elsevier, October 2018, 10.1016/j.matlet.2018.07.032 Article
N. Sharma, S. N. Alam, B. C. Ray, S. Yadav, and K. Biswas, "Silica-graphene nanoplatelets and silica-MWCNT composites: Microstructure and mechanical properties", Diamond and Related Materials, vol.87, pp.186-201, Elsevier, August 2018, 10.1016/j.diamond.2018.06.009 Article
K. K. Mahato, K. Dutta, and B. C. Ray, "Effect of thermal spike conditioning on the tensile behavior of glass/epoxy composites", Materials Today: Proceedings, vol.5, no.5, pp.12109-12114, Elsevier, July 2018, 10.1016/j.matpr.2018.02.188 Article
P. N. Harshita, D. K. Rathore, R. K. Prusty, and B. C. Ray, "Extrapolation of mechanical strengthening effect in nanoclay/epoxy nanocomposites to elevated temperature environments", Transactions of the Indian Institute of Metals, vol.71, no.8, pp.2015-2024, Springer, May 2018, 10.1007/s12666-018-1334-8 Article
B. C. Ray, R. K. Prusty, and D. K. Rathore, "Fibrous polymeric composites: environmental degradation and damage", pp.208, CRC Press, May 2018 Book
S. K. Ghosh, P. Rajesh, B. Srikavya, D. K. Rathore, R. K. Prusty, and B. C. Ray, "Creep behaviour prediction of multi-layer graphene embedded glass fiber/epoxy composites using time-temperature superposition principle", Composites Part A: Applied Science and Manufacturing, vol.107, pp.507-518, Elsevier, April 2018, 10.1016/j.compositesa.2018.01.030 Article
A. O. Fulmali, K. Rani, K. K. Mahato, R. K. Prusty, and B. C. Ray, "Effect of CNT addition on cure kinetics of glass fiber/epoxy composite", in Materials Science and Engineering, vol.338, IOP Science, iop conference , 7th National Conference on Processing and Characterization of Materials (NCPCM 2017) 8–9 December 2017, National Institute of Technology Rourkela, India, April 2018, 10.1088/1757-899X/338/1/012003 Inproceedings
K. K. Mahato, A. O. Fulmali, K. Rani, K. Dutta, R. K. Prusty, and B. C. Ray, "Effect of severely thermal shocked MWCNT enhanced glass fiber reinforced polymer composite: An emphasis on tensile and thermal responses", in Materials Science and Engineering, vol.338, IOP Science, iop conference , 7th National Conference on Processing and Characterization of Materials (NCPCM 2017) 8–9 December 2017, National Institute of Technology Rourkela, India, April 2018, 10.1088/1757-899X/338/1/012057 Inproceedings
K. K. Mahato, K. Dutta, and B. C. Ray, "Loading rate sensitivity of liquid nitrogen conditioned glass fiber reinforced polymeric composites: An emphasis on tensile and thermal responses", Journal of Applied Polymer Science, vol.135, no.9, pp.45856, Wiley, March 2018, 10.1002/app.45856 Article
K. K. Mahato, K. Dutta, and B. C. Ray, "Static and dynamic behavior of fibrous polymeric composite materials at different environmental conditions", Journal of Polymers and the Environment, vol.26, no.3, pp.1024-1050, Springer, March 2018, 10.1007/s10924-017-1001-x Article
A. Anand, P. Banerjee, R. K. Prusty, and B. C. Ray, "Lifetime prediction of nano-silica based glass fibre/epoxy composite by time temperature superposition principle", in Materials Science and Engineering, vol.338, IOP Science, iop conference 2018, 10.1088/1757-899X/338/1/012020 Inproceedings
N. Sharma, S. N. Alam, B. C. Ray, S. Yadav, and K. Biswas, "Wear behavior of silica and alumina-based nanocomposites reinforced with multi walled carbon nanotubes and graphene nanoplatelets", Wear, vol.418-419, pp.290--304, Elsevier 2018, 10.1016/j.wear.2018.10.008 Article
R. K. Prusty, D. K. Rathore, and B. C. Ray, "Water-induced degradations in MWCNT embedded glass fiber/epoxy composites: An emphasis on aging temperature", Journal of Applied Polymer Science, vol.135, no.11, Wiley, November 2017, 10.1002/app.45987 Article
R. K. Prusty, S. K. Ghosh, D. K. Rathore, and B. C. Ray, "Reinforcement effect of graphene oxide in glass fiber/epoxy composites at in-situ elevated temperature environments: an emphasis on graphene oxide content", Composites Part A: Applied Science and Manufacturing, vol.95, pp.40-53, Elsevier, April 2017, 10.1016/j.compositesa.2017.01.001 Article
K. K. Mahato, D. K. Rathore, K. Dutta, and B. C. Ray, "Effect of loading rates of severely thermal-shocked glass fiber/epoxy composites", Composites Communications, vol.3, pp.7-10, Elsevier, March 2017, 10.1016/j.coco.2016.11.001 Article
R. K. Prusty, D. K. Rathore, S. Sahoo, V. Parida, and B. C. Ray, "Mechanical behaviour of graphene oxide embedded epoxy nanocomposite at sub- and above- zero temperature environments", Composites Communications, vol.3, pp.47-50, Elsevier, March 2017, 10.1016/j.coco.2017.02.003 Article
K. K. Mahato, D. K. Rathore, R. K. Prusty, K. Dutta, and B. C. Ray, "Tensile behavior of MWCNT enhanced glass fiber reinforced polymeric composites at various crosshead speeds", in Materials Science and Engineering, vol.178, pp.012006, IOP Science, iop conference , National Conference on Processing and Characterization of Materials 9–10 December 2016, NIT Rourkela, Orissa, India, March 2017, 10.1088/1757-899X/178/1/012006 Inproceedings
D. Rathore, R. K. Prusty, S. C. Mohanty, B. P. Singh, and B. C. Ray, "In-situ elevated temperature flexural and creep response of inter-ply glass/carbon hybrid FRP composites", Mechanics of Materials, vol.105, pp.99-111, Elsevier, February 2017, 10.1016/j.mechmat.2016.11.013 Article
K. K. Mahato, K. Dutta, and B. C. Ray, "High-temperature tensile behavior at different crosshead speeds during loading of glass fiber-reinforced polymer composites", Journal of applied polymer science, vol.134, no.16, Wiley, January 2017, 10.1002/app.44715 Article
D. K. Rathore, R. K. Prusty, and B. C. Ray, "Mechanical, thermomechanical, and creep performance of CNT embedded epoxy at elevated temperatures: an emphasis on the role of carboxyl functionalization", Journal of Applied Polymer Science, vol.134, no.21, pp.44851(1) - 44851(12), Wiley, January 2017, 10.1002/app.44851 Article
S. K. Ghosh, R. K. Prusty, D. K. Rathore, and B. C. Ray, "Creep behaviour of graphite oxide nanoplates embedded glass fiber/epoxy composites: Emphasizing the role of temperature and stress", Composites Part A: Applied Science and Manufacturing, vol.102, pp.166-177, Elsevier 2017, 10.1016/j.compositesa.2017.08.001 Article
R. K. Prusty, D. K. Rathore, and B. C. Ray, "Evaluation of the role of functionalized CNT in glass fiber/epoxy composite at above-and sub-zero temperatures: emphasizing interfacial microstructures", Composites Part A: Applied Science and Manufacturing, vol.101, pp.215-226, Elsevier 2017, 10.1016/j.compositesa.2017.06.020 Article
B. P. Singh, D. K. Rathore, S. C. Mohanty, R. K. Prusty, and B. C. Ray, "In-situ elevated temperature mechanical performance of MWCNT/epoxy nanocomposite", in Sensors & Transducers Journal, vol.210, no.3, pp.17-19, International Frequency Sensor Association (IFSA) Publishing 2017 Inproceedings
S. Sahoo, B. C. Ray, and A. Mallik, "Role of electrochemically in-house synthesized and functionalized graphene nano-fillers on the structural performance of epoxy matrix composites", Physical Chemistry Chemical Physics, vol.19, no.24, pp.16219-16230, Royal Society of Chemistry 2017, 10.1039/C7CP01615H Article
R. K. Prusty, D. K. Rathore, and B. C. Ray, "CNT/polymer interface in polymeric composites and its sensitivity study at different environments", Advances in Colloid and Interface Science, Elsevier, December 2016, 10.1016/j.cis.2016.12.008 Article
M. Shukla, D. Kumar, D. Rathore, R. K. Prusty, and B. C. Ray, "An assessment of flexural performance of liquid nitrogen conditioned glass/epoxy composites with multiwalled carbon nanotube", Journal of Composite Materials, vol.50, no.22, pp.3077–3088, SAGE Publications, November 2016, 10.1177/0021998315615648 Article
R. K. Prusty, D. K. Rathore, and B. C. Ray, "Effect of in-service temperature on the flexural and creep behaviour of carbon nanofiber embedded epoxy nanocomposite", in 3rd International Congress on Advanced Materials (AM2016), 27-30 November 2016 ,Bangkok, Thailand, November 2016 Inproceedings
D. Rathore, B. P. Singh, S. C. Mohanty, R. K. Prusty, and B. C. Ray, "Temperature dependent reinforcement efficiency of carbon nanotube in polymer composite", Composites Communications, vol.1, pp.29–32, Elsevier, October 2016, 10.1016/j.coco.2016.08.002 Article
A., A. K. Mondal, H. Dieringa, B. C. Ray, and S. Kumar, "Impression creep behaviour of squeeze-cast Ca and Sb added AZ91 magnesium alloy", Materials Science and Engineering: A, vol.673, pp.332-345, Elsevier, September 2016, 10.1016/j.msea.2016.07.087 Article
R. K. Prusty, D. Rathore, B. P. Singh, S. C. Mohanty, K. Mahato, and B. C. Ray, "Experimental optimization of flexural behaviour through inter-ply fibre hybridization in FRP composite", Construction and Building Materials, vol.118, pp.327-336, Elsevier, August 2016, 10.1016/j.conbuildmat.2016.05.054 Article
D. Rathore, R. K. Prusty, D. Kumar, and B. C. Ray, "Mechanical performance of CNT-filled glass fiber/epoxy composite in in-situ elevated temperature environments emphasizing the role of CNT content", Composites Part A: Applied Science and Manufacturing, vol.84, pp.364-376, Elsevier, May 2016, 10.1016/j.compositesa.2016.02.020 Article
K. Mahato, M. Biswal, D. Rathore, R. K. Prusty, K. Dutta, and B. C. Ray, "Effect of loading rate on tensile properties and failure behavior of glass fibre/epoxy composite", in 5th National Conference on Processing and Characterization of Materials, vol.115, no.1, IOP Publishing, iop conference : materials science and engineering, National Institute of Technology, Rourkela, March 2016, 10.1088/1757-899X/115/1/012017 Inproceedings
S. C. Mohanty, B. P. Singh, K. Mahato, D. Rathore, R. K. Prusty, and B. C. Ray, "Water absorption behavior and residual strength assessment of glass/epoxy and glass-carbon/epoxy hybrid composite", in 5th National Conference on Processing and Characterization of Materials, vol.115, no.1, IOP Publishing, iop conference : materials science and engineering, National Institute of Technology, Rourkela, India, March 2016, 10.1088/1757-899X/115/1/012029 Inproceedings
K. Dash and B. C. Ray, "Implications of degree of thermal shocks on flexural properties of Cu-Al2O3 micro- and nano-composites", Journal of Materials Engineering and Performance, vol.25, no.1, pp.259-266, Springer, January 2016, 10.1007/s11665-015-1832-3 Article
K. Dash, S. Sukumaran, and B. C. Ray, "The behaviour of aluminium matrix composites under thermal stresses", Science and Engineering of Composite Materials, vol.23, no.1, pp.1-20, De Gruyter, January 2016, 10.1515/secm-2013-0185 Article
R. K. Prusty, D. Rathore, M. Shukla, and B. C. Ray, "Flexural behaviour of CNT-filled glass/epoxy composites in an in-situ environment emphasizing temperature variation", Composites Part B: Engineering, vol.83, pp.166-174, Elsevier, December 2015, 10.1016/j.compositesb.2015.08.035 Article
S. Sethi and B. C. Ray, "Environmental effects on fibre reinforced polymeric composites: Evolving reasons and remarks on interfacial strength and stability", Advances in Colloid and Interface Science, vol.217, pp.43-67, Elsevier, March 2015, 10.1016/j.cis.2014.12.005 Article
M. J. Shukla, D. S. Kumar, K. K. Mahato, D. K. Rathore, R. K. Prusty, and B. C. Ray, "A comparative study of the mechanical performance of glass and glass/carbon hybrid polymer composites at different temperature environments", in 4th National Conference on Processing and Characterization of Materials, vol.75, no.1, IOP Publishing, materials science and engineering, NIT, Rourkela, February 2015, 10.1088/1757-899X/75/1/012002 Inproceedings
M. J. Shukla, D. S. Kumar, K. K. Mahato, D. K. Rathore, R. K. Prusty, and B. C. Ray, "A comparative study of the mechanical performance of Glass and Glass/Carbon hybrid polymer composites at different temperature environments", in IOP Conference Series: Materials Science and Engineering, vol.75, pp.012002, IOP Science, iop conference , 4th National Conference on Processing and Characterization of Materials 5–6 December 2014, Rourkela, India, February 2015, 10.1088/1757-899X/75/1/012002 Inproceedings
A., A. K. Mondal, S. Kumar, and B. C. Ray, "Individual and combined additions of calcium and antimony on microstructure and mechanical properties of squeeze-cast AZ91D magnesium alloy", Materials Science and Engineering: A, vol.626, pp.186-194, Elsevier, February 2015, 10.1016/j.msea.2014.12.068 Article
S. Sethi, D. K. Rathore, and B. C. Ray, "Effects of temperature and loading speed on interface-dominated strength in fibre/polymer composites: an evaluation for in-situ environment", Materials & Design, vol.65, pp.617-626, Elsevier, January 2015, 10.1016/j.matdes.2014.09.053 Article
D. S. Kumar, M. J. Shukla, K. K. Mahato, D. K. Rathore, R. K. Prusty, and B. C. Ray, "Effect of post-curing on thermal and mechanical behavior of GFRP composites", in IOP, vol.75, no.1, IOP Publishing, materials science and engineering, NIT, Rourkela, December 2015, 10.1088/1757-899X/75/1/012012 Inproceedings
S. Sethi and B. C. Ray, "An assessment of mechanical behavior and fractography study of glass/epoxy composites at different temperatures and loading speeds", Materials and Design, vol.64, pp.160-165, Elsevier, December 2014, 10.1016/j.matdes.2014.07.017 Article
B. C. Ray and R. D, "Durability and integrity studies of environmentally conditioned interfaces in fibrous polymeric composites: critical concepts and comments", Advances in Colloid and Interface Science, vol.209, pp.68-83, Elsevier, July 2014, 10.1016/j.cis.2013.12.014 Article
P. S, D. K, and B. C. Ray, "Processing and properties of Cu based micro- and nano-composites", Bulletin of Materials Science, vol.37, no.2, pp.227-238, Springer, April 2014, 10.1007/s12034-014-0643-8 Article
K. Dash, S. Panda, and B. C. Ray, "Effects of thermal and cryogenic conditionings on flexural behavior of thermally shocked Cu-Al2O3 micro and nanocomposites", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol.45, no.3, pp.1567-1578, Springer, March 2014, 10.1007/s11661-013-2070-7 Article
D. K, C. D, and B. C. Ray, "Synthesis and characterization of aluminium-alumina micro- and nano-composites by spark plasma sintering", Materials Research Bulletin, vol.48, no.7, pp.2535-2542, Elsevier, July 2013, 10.1016/j.materresbull.2013.03.014 Article
A. Mallik and B. C. Ray, "Implication of low temperature and sonication on electrocrystallization mechanism of Cu thin films: A kinetics and structural correlation", Materials Research, vol.16, no.2, pp.539-545, SciELO, April 2013, 10.1590/S1516-14392013005000009 Article
A. Mallik, A. S. Bankoti, and B. C. Ray, "On the effects of bath composition and ultrasound on structure and properties of Cu thin films", Russian Journal of Electrochemistry, vol.49, no.2, pp.131-137, Springer, February 2013, 10.1134/S1023193513020134 Article
A. Das, A. Mallik, and B. C. Ray, "Analysis of effect of ultrasound on the magnetic topography of electroplated ni films by magnetic force microscopy (MFM)", Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, vol.43, no.2, pp.267-275, Springer, April 2012, 10.1007/s11663-011-9593-3 Article
K. Dash, B. C. Ray, and D. Chaira, "Synthesis and characterization of copper-alumina metal matrix composite by conventional and spark plasma sintering", Journal of Alloys and Compounds, vol.516, pp.78-84, Elsevier, March 2012, 10.1016/j.jallcom.2011.11.136 Article
S. Sethi, P. K. Panda, . R. Nayak, and B. C. Ray, "Experimental studies on mechanical behavior and microstructural assessment of glass/epoxy composites at low temperatures", Journal of Reinforced Plastics and Composites, vol.31, no.2, pp.77-84, Sage Publications, February 2012, 10.1177/0731684411431767 Article
A. Mallik and B. C. Ray, "An analysis of the temperature-induced supersaturation effects on structure and properties of sono-electrodeposited copper thin films", Surface and Coatings Technology, vol.206, no.7, pp.1947-1954, Elsevier, December 2011, 10.1016/j.surfcoat.2011.09.066 Article
R. C. Sahu, R. Patel, and B. C. Ray, "Removal of hydrogen sulfide using red mud at ambient conditions", Fuel Processing Technology, vol.92, no.8, pp.1587-1592, Elsevier, July 2011, 10.1016/j.fuproc.2011.04.002 Article
R. C. Sahu, R. Patel, and B. C. Ray, "Adsorption of Zn(II) on activated red mud: Neutralized by CO2", Desalination, vol.266, no.1-3, pp.93-97, Elsevier, January 2011, 10.1016/j.desal.2010.08.007 Article
A. Mallik and B. C. Ray, "Residual stress and nanomechanical properties of sonoelectrodeposited Cu films", Surface Engineering, vol.27, no.7, pp.551-556, Taylor & Francis, January 2011, 10.1179/1743294411Y.0000000011 Article
A. Mallik and B. C. Ray, "Residual stress and nanomechanical properties of sonoelectrodeposited Cu films", Surface Engineering, vol.27, no.7, pp.551-556, Taylor & Francis Group, January 2011, 10.1179/1743294411Y.0000000011 Article
G. Mishra, S. Mohapatra, P. Behera, B. Dash, B. Dash, and B. C. Ray, "Environmental stability of GFRP laminated composites: an emphasis on mechanical behaviour", Aircraft Engineering and Aerospace Technology, vol.82, no.4, pp.258-266, Emerald, December 2010, 10.1108/00022661011082731 Article
A. Mallik, A. Bankoti, and B. C. Ray, "A study on the modification of conventional electrochemical crystallization under sonication: The phenomena of secondary nucleation", Electrochemical and Solid-State Letters, vol.12, no.12, pp.f46-f49, Electrochemical Society 2009, 10.1149/1.3243916 Article
M. S. Kumar, N. Sharma, and B. C. Ray, "Microstructural and mechanical aspects of carbon/epoxy composites at liquid nitrogen temperature", Journal of Reinforced Plastics and Composites, vol.28, no.16, pp.2013-2023, Sage 2009, 10.1177/0731684408090717 Article
A. Mallik and B. C. Ray, "Morphological study of electrodeposited copper under the influence of ultrasound and low temperature", Thin Solid Films, vol.517, no.24, pp.6612-6616, Elsevier 2009, 10.1016/j.tsf.2009.04.054 Article
M. S. Kumar, N. Sharma, and B. C. Ray, "Structural integrity of glass/polyester composites at liquid nitrogen temperature", Journal of Reinforced Plastics and Composites, vol.28, no.11, pp.1297-1304, Sage 2009, 10.1177/0731684408088889 Article
P., S. Mula, U., and B. C. Ray, "Effect of hygrothermal shock cycles on interlaminar shear strength of hybrid composites", Journal of Reinforced Plastics and Composites, vol.26, no.5, pp.519-524, Sage Journals, March 2007, 10.1177/0731684406072541 Article
B. Das, S. Sahu, and B. C. Ray, "Effects of loading speed on the failure behaviour of FRP composites", Aircraft Engineering and Aerospace Technology, vol.79, no.1, pp.45-52, Emerald, December 2007, 10.1108/00022660710720485 Article
M. S. Kumar, N. Chawla, A. Priyadarsini, I. Mishra, and B. C. Ray, "Assessment of microstructural integrity of glass/epoxy composites at liquid nitrogen temperature", Journal of Reinforced Plastics and Composites, vol.26, no.11, pp.1083-1089, Sage Journals 2007, 10.1177/0731684407079353 Article
T. Bera, S. Mula, P. Ray, and B. C. Ray, "Effects of thermal shocks and thermal spikes on hygrothermal behavior of glass-polyester composites", Journal of Reinforced Plastics and Composites, vol.26, no.7, pp.725-738, Sage Journals 2007, 10.1177/0731684409076732 Article
B. C. Ray, S. Hasan, and D. Clegg, "Evaluation of defects in FRP composites by NDT techniques", Journal of Reinforced Plastics and Composites, vol.26, no.12, pp.1187-1192, Sage Journals 2007, 10.1177/0731684407079348 Article
A. Srivastav, M. Behera, and B. C. Ray, "Loading rate sensitivity of Jute/Glass hybrid reinforced epoxy composites: effect of surface modifications", Journal of Reinforced Plastics and Composites, vol.26, no.9, pp.851-860, Sage Journals 2007, 10.1177/0731684407076735 Article
B. C. Ray, "Adhesion of glass/epoxy composites influenced by thermal and cryogenic environments", Journal of Applied Polymer Science, vol.102, no.2, pp.1943-1949, John Wiley and Sons Inc. 2006, 10.1002/app.24488 Article
B. C. Ray, "Effect of thermal shock on interlaminar strength of thermally aged glass fiber-reinforced epoxy composites", Journal of Applied Polymer Science, vol.100, no.3, pp.2062-2066, Wiley 2006, 10.1002/app.23019 Article
B. C. Ray, "Effects of changing environment and loading speed on mechanical behavior of FRP composites", Journal of Reinforced Plastics and Composites, vol.25, no.12, pp.1227-1240, Sage 2006, 10.1177/0731684406059783 Article
B. C. Ray, "Effects of changing seawater temperature on mechanical properties of GRP composites", Polymers and Polymer Composites, vol.15, no.1, pp.59-63, Smithers Rapra 2006, http://www.polymerjournals.com/pdfdownload/987602.pdf Article
S. Mula, T. Bera, P., and B. C. Ray, "Effects of hydrothermal aging on mechanical behavior of sub-zero weathered GFRP composites", Journal of Reinforced Plastics and Composites, vol.25, no.6, pp.673-680, Sage 2006, 10.1177/0731684406060247 Article
B. C. Ray, U., and B. Verma, "Influence of crucible rotation speed on hardness, cast structure and impact properties", Transactions of the Indian Institute of Metals, vol.59, no.1, pp.57-63, Springer Science + Business Media 2006 Article
B. C. Ray, "Loading rate effects on mechanical properties of polymer composites at ultralow temperatures", Journal of Applied Polymer Science, vol.100, no.3, pp.2289-2292, Wiley 2006, 10.1002/app.22853 Article
B. C. Ray, "Loading rate sensitivity of glass fiber-epoxy composite at ambient and sub-ambient temperatures", Journal of Reinforced Plastics and Composites, vol.25, no.3, pp.329-333, Sage Journals 2006, 10.1177/0731684406060246 Article
B. C. Ray, S. Mula, T. Bera, and P., "Prior thermal spikes and thermal shocks on mechanical behavior of glass fiber-epoxy composites", Journal of Reinforced Plastics and Composites, vol.25, no.2, pp.197-213, Sage 2006, 10.1177/0731684405056446 Article
B. C. Ray, "Temperature effect during humid ageing on interfaces of glass and carbon fibers reinforced epoxy composites", Journal of Colloid and Interface Science, vol.298, no.1, pp.111-117, Elsevier 2006, 10.1016/j.jcis.2005.12.023 Article
B. C. Ray, "Effect of hydrothermal shock cycles on shear strength of glass fiber-polyester composites", Journal of Reinforced Plastics and Composites, vol.24, no.12, pp.1335-1340, Sage 2005, 10.1177/0731684405049854 Article
B. C. Ray, "Effect of thermal shockon flexural modulus of thermally and cryogenically conditioned Kevlar/epoxy composites", Advanced Composites Letters, vol.14, no.2, pp.59-63, Adcotec 2005 Article
B. C. Ray, "Effects of thermal and cryogenic conditionings on mechanical behavior of thermally shocked glass fiber-epoxy composites", Journal of Reinforced Plastics and Composites, vol.24, no.7, pp.713-717, Sage 2005, 10.1177/0731684405046081 Article
B. C. Ray, "Freeze-thaw response of glass-polyester composites at different loading rates", Journal of Reinforced Plastics and Composites, vol.24, no.16, pp.1771-1776, Sage 2005, 10.1177/0731684405052195 Article
B. C. Ray, "Hydrothermal fatigue on interface of glass-epoxy laminates", Journal of Reinforced Plastics and Composites, vol.24, no.10, pp.1051-1056, Sage Journals 2005, 10.1177/0731684405048204 Article
B. C. Ray, "Thermal shock and thermal fatigue on delamination of glass-fiber-reinforced polymeric composites", Journal of Reinforced Plastics and Composites, vol.24, no.1, pp.111-116, Sage 2005, 10.1177/0731684405042953 Article
B. C. Ray, "Effects of crosshead velocity and sub-zero temperature on mechanical behaviour of hygrothermally conditioned glass fibre reinforced epoxy composites", Materials Science and Engineering: A, vol.379, no.1-2, pp.39-44, Elsevier 2004, 10.1016/j.msea.2003.11.031 Article
B. C. Ray, "Thermal shock on interfacial adhesion of thermally conditioned glass fiber/epoxy composites", Materials Letters, vol.58, no.16, pp.2175-2177, Elsevier 2004, 10.1016/j.matlet.2004.01.035 Article
B. C. Ray, S., and D., "Effect of thermal shock on modulus of thermally and cryogenically conditioned Kevlar/polyester composites", Journal of Materials Science Letters, vol.22, no.3, pp.203-204, Springer 2003, 10.1023/A:1022254110585 Article
B. C. Ray, "Study of the influence of thermal shock on interfacial damage in thermosetting matrix aramid fiber composites", Journal of Materials Science Letters, vol.22, no.3, pp.201-202, Springer 2003, 10.1023/A:1022202126515 Article
B. C. Ray, "Assessment of mechanical behavior of Kevlar/polyester composites after thermal shock conditioning", Journal of Materials Science Letters, vol.21, no.18, pp.1391-1392, Springer 2002, 10.1023/A:1019985011732 Article

 Courses Taught

  • MM204 : Phase Transformation {Theory}
  • MM301 : Heat Treatment of Metallic Materials {Theory}
  • MM3102 : Phase Transformation {Theory}
  • MM3103 : Heat treatment of Metallic Materials {Theory}
  • MM311 : Phase Transformation {Theory}
  • MM314 : Heat Treatment of Metallic Materials {Theory}
  • MM5122 : Joining of Metals {Theory}
  • MM611 : Phase Transformation of Materials {Theory}
  • MM6112 : Phase Transformation {Theory}
  • MM789 : Product Development Laboratory {Practical}

 Research Scholars

Ph.D. Students [15]
Polymer Composite

 Sanghamitra Sethi

 Graduated  (2014)

 Supervisor

Material Science

 Khushbu Dash

 Graduated  (2014)

 Supervisor

Implication Of Cnt Fillers On Environmental Durability Of Gfrp Composites: An Evaluation Of Microstructural Features And Mechanical Properties

 Rajesh Kumar Prusty

 Graduated  (2017)

 Supervisor

Flexural Behaviour Of Nano-Filler Enhanced And Inter-Ply Hybrid Frp Composites At Different In-Situ Elevated Temperatures

 Dinesh Kumar Rathore

 Graduated  (2017)

 Supervisor

Creep, Tensile And Corrosion Behaviour Of Ca And/Or Sb Added Az91 Mg Alloys

 Anil Kumar Singh Bankoti

 Graduated  (2017)

 Co-Supervisor

Electrochemically Controlled Synthesis Of Few-Layer Graphene Nanosheets And Its Evaluation For Applications

 Sumanta Kumar Sahoo

 Graduated  (2017)

 Co-Supervisor

Development Of Alumina And Silica Based Nanocomposites Using Graphite Nanoplatelets And Multiwalled Carbon Nanotubes As Reinforcement

 Nidhi Sharma

 Graduated  (2018)

 Co-Supervisor

Environmental Durability Of Multiscale Glass Fiber/Epoxy Composites: An Assessment On Mechanical Properties And Microstructural Evaluation

 Kishore Kumar Mahato

 Graduated  (2020)

 Supervisor

3-D Composite Materials

 Abhinav Omprakash Fulmali

 OnGoing

 Co-Supervisor

Metal/Frp Joining

 B N V S Ganesh Gupta K

 OnGoing

 Supervisor

Frp Composites For Ballistic Applications

 Shubham

 OnGoing

 Supervisor

Hybrid Frp Composites

 Srinivasu Dasari

 OnGoing

 Co-Supervisor

Investigation Behaviour Of Cnt Reinforced Metal Matrix Composites

 Pokula Narendra Babu

 OnGoing

 Co-Supervisor

Mechanical Behaviour Studies Of Composites

 Pavan Kumar Gangineni

 OnGoing

 Supervisor

Fibre Reinforced Polymer

 Savita Gupta

 OnGoing

 Co-Supervisor

Executive Ph.D. Students [1]
Hybrid Frp Composite Materials

 Bibhu Prasanna Sahoo

 OnGoing

 Co-Supervisor

 Dissertations

PG Dissertation
  • Devalingam Santhosh Kumar (213MM1470), "A new generation fibre reinforced polymer composites for low and cryogenic temperature applications." - M.Tech.    Co-supervisor     2014-15 Spring
  • Meet Jayesh Shukla (213MM1474), "Elevated temperature performance of hybrid polymer composites" - M.Tech.    Supervisor     2014-15 Spring
  • Bhanu Pratap Singh (214MM2361), "Mechanical performance evaluation of carbon nanotube reinforced polymer nanocomposites at above ambient temperature environments." - M.Tech.    Co-supervisor     2015-16 Spring
  • Sarat Chandra Mohanty (214MM1340), "Development of CNT modified GFRP composite and assessment of its elevated temperature mechanical performance" - M.Tech.    Supervisor     2015-16 Spring
  • Debaraj Sahoo (215MM1242), "EFFECT OF HUMID AGEING ON THE DURABILITY OF FUNCTIONALIZED CNT EMBEDDED GFRP COMPOSITE" - M.Tech.    Co-supervisor     2016-17 Spring
  • Pradeep Kumar Biswal (215MM1425), "MECHANICAL PERFORMANCE OF GLASS/CARBON HYBRID POLYMER COMPOSITES UNDER CRYOGENIC TEMPERATURE AND HUMID ENVIRONMENTS" - M.Tech.    Supervisor     2016-17 Spring
  • Abhinav Omprakash Fulmali (216MM1430), "Effect of CNT/CNT-COOH addition on Creep performance and water absorption behaviour of embedded glass fiber/epoxy composites" - M.Tech.    Co-supervisor     2017-18 Spring
  • Kattaguri Rani (216MM1426), "Resistance of CNF modified glass fiber/epoxy composites towards various corrosive fluids" - M.Tech.    Supervisor     2017-18 Spring
  • Krishna Chaitanya Nuli (217MM1360), "Evaluation of mechanical, thermal properties and water uptake kinetics of FCNT, CNT incorporated GE under different harsh environments" - M.Tech.    Supervisor     2018-19 Spring
  • Yandrapu Sagar (217MM1417), "Effect of bath concentration and current during electrophoretic deposition process on the properties of CFRP composite" - M.Tech.    Co-supervisor     2018-19 Spring
  • Avadesh Yadav (218MM1257), "Mechanical properties of CNT embedded fiber reinforced polymer composite at various temperatures: A comparative analysis through different processing techniques" - M.Tech.    Co-supervisor     2019-20 Spring
  • Hiremath Mritunjay M (218MM1253), "Mechanical Characterization of nano titania reinforced Fiber Metal Laminates for Structural Applications" - M.Tech.    Supervisor     2019-20 Spring
  • Sushant Saurabh (218MM1479), "Enhancement in Mode I interlaminar fracture toughness of glass/epoxy composites by using multiscale composite approach" - M.Tech.    Supervisor     2019-20 Spring
UG Dissertation
  • Abhisek Agrawalla (111MM0264), "DURABILITY ASSESSMENT OF MULTIWALLED CARBON-NANOTUBES MODIFIED ADVANCED FIBROUS POLYMERIC COMPOSITE IN DIFFERENT MARINE ENVIRONMENT" - B.Tech.    Supervisor     2014-15 Spring
  • Hem Shruti Bhardwaj (111MM0357), "Environmental Study Of Nano-Filler Embedded Fiber Reinforced Polymer Composite" - B.Tech.    Supervisor     2014-15 Spring
  • Namrata Keshri (111MM0365), "DURABILITY ASSESSMENT OF MULTIWALLED CARBON-NANOTUBES MODIFIED ADVANCED FIBROUS POLYMERIC COMPOSITE IN DIFFERENT MARINE ENVIRONMENT" - B.Tech.    Supervisor     2014-15 Spring
  • Prangya Paramita Sahoo (111MM0378), "ENVIRONMENTAL STUDY OF NANO-FILLER EMBEDDED FIBER REINFORCED POLYMER COMPOSITE" - B.Tech.    Supervisor     2014-15 Spring
  • Brajesh Ranjan (112MM0385), "Mechanical performance of epoxy with varying content of carbonaceous nano-filler at elevated temperature" - B.Tech.    Supervisor     2015-16 Spring
  • Jyoti Prakash (112MM0387), "Role of environmental temperature on the mechanical behaviour of Nanoclay modified epoxy composite" - B.Tech.    Supervisor     2015-16 Spring
  • Philkhana Naga Harshita (112MM0499), "Role of environmental temperature on the mechanical behaviour of Nanoclay modified epoxy composite" - B.Tech.    Supervisor     2015-16 Spring
  • Sweta Sahoo (112MM0419), "ELEVATED TEMPERATURE PERFORMANCE OF CARBON NANOTUBE MODIFIED EPOXY NANOCOMPOSITES" - B.Tech.    Co-supervisor     2015-16 Spring
  • Varsha Parida (112MM0413), "ELEVATED TEMPERATURE PERFORMANCE OF CARBON NANOTUBE MODIFIED EPOXY NANOCOMPOSITES" - B.Tech.    Co-supervisor     2015-16 Spring
  • Akula Gayatri Sri Anjani (113MM0435), "Effect of Loading Rate and Temperature on Mechanical Performance of CNT Modified Glass Epoxy Fiber Reinforced Composite" - B.Tech.    Co-supervisor     2016-17 Spring
  • Arunesh Kumar Pandey (113MM0456), "Effect of Loading Rate and Temperature on Mechanical Performance of CNT Modified Glass Epoxy Fiber Reinforced Composite" - B.Tech.    Co-supervisor     2016-17 Spring
  • Ashika Agrawal (113MM0434), "Flexural and Creep behavior of CNF enhanced GFRP composites at different temperatures" - B.Tech.    Supervisor     2016-17 Spring
  • Bata Krishna Giri (113MM0445), "Flexural and Creep behavior of CNF enhanced GFRP composites at different temperatures" - B.Tech.    Supervisor     2016-17 Spring
  • Dipesh Divyanshu (113MM0443), "Cryogenic performance of Nano-Silica embedded Glass Fibre Reinforced Polymer composite" - B.Tech.    Co-supervisor     2016-17 Spring
  • Goswami Tanmay Mahendra (113MM0602), "Effect of Nano-Silica reinforcement on mechanical behaviour of GFRP composites at different temperatures" - B.Tech.    Supervisor     2017 Summer
  • Ankit Adarsha Patra (114MM0264), "Effect of Freeze-thaw cycling on properties of CNT reinforced glass-epoxy composite" - B.Tech.    Supervisor     2017-18 Spring
  • Chaganti S Sarat Chandra (114MM0642), "Effect of Hydrothermal cycling on mechanical properties of Glass Fibre/Epoxy composites with and without CNT" - B.Tech.    Co-supervisor     2017-18 Spring
  • Ganesh Arepalli (114MM0500), "Effect of Hydrothermal cycling on mechanical properties of Glass fibre/Epoxy composites with and without CNT" - B.Tech.    Co-supervisor     2017-18 Spring
  • Soubhagya Kumar Nayak (114MM0263), "Effect of Freeze-thaw cycling on properties of CNT reinforced glass-epoxy composite" - B.Tech.    Supervisor     2017-18 Spring
  • Himanshu Shekhar (115MM0659), "Fabrication of Single Lap Joint and determination of the effect of adhesive thickness on the lap shear strength of the joint" - B.Tech.    Co-supervisor     2018-19 Spring
  • P.N. Shivangi (115MM0476), "Experimental investigation on the effect of nano- fillers on the carbon fibre modified through Electrophoretic deposition" - B.Tech.    Co-supervisor     2018-19 Spring
  • Saswat Choudhury (115MM0482), "Enhancement in Properties and Performance of advanced FRP composites to be used in structural applications through fiber modification" - B.Tech.    Supervisor     2018-19 Spring
  • Shashwat Alok (115MM0657), "Fabrication of Single Lap Joint and determination of the effect of adhesive thickness on the lap shear strength of the joint" - B.Tech.    Co-supervisor     2018-19 Spring
  • Vinit Kumar Agarwalla (115MM0477), "Assessment of severely thermal shock conditioning of nano TiO2 enhanced glass fiber/epoxy composites at various loading rate" - B.Tech.    Co-supervisor     2018-19 Spring
  • Anwesha Panda (116MM0538), "Temperature Dependency of Inter-laminar Behaviour of Graphene Carboxyl modified CFRPs: An Emphasis on Effect of Nano-filler Concentration" - B.Tech.    Supervisor     2019-20 Spring
  • Kathula Padma Nayani (116MM0536), "Mechanical Characterisation of Adhesively Bonded Lap Joints: An Assessment on Adhesive Types and Testing Temperature" - B.Tech.    Supervisor     2019-20 Spring
  • Amrit Jena (117MM0610), "Numerical Estimation of Elastic Properties of Short Fiber-Reinforced Composites and Experimental Investigation of Nano-Fillers Addition in Continuous Fiber Polymer Composites" - B.Tech.    Supervisor     2020-21 Spring
  • Ankush Kumar Gautam (117MM0688), "Effect of Cure Parameters on Vinyl ester Polymer" - B.Tech.    Supervisor     2020-21 Spring
  • Chintada Guna Sai (117MM0638), "FATIGUE BEHAVIOUR OF FRP COMPOSITES" - B.Tech.    Co-supervisor     2020-21 Spring
  • Gourav Samal (117MM0639), "FATIGUE BEHAVIOUR OF FRP COMPOSITES" - B.Tech.    Co-supervisor     2020-21 Spring
  • Jasmin Nayak (117MM0031), "A comparison between CNT doped carbon fiber reinforced polymer composites and neat carbon fiber reinforced polymer composites" - B.Tech.    Supervisor     2020-21 Spring
  • Pooja Kumari (117MM0618), "FATIGUE BEHAVIOUR OF FRP COMPOSITES" - B.Tech.    Co-supervisor     2020-21 Spring
  • Sai Seetha Ram Nomula (712MM1168), "Durability assessment of Carbon nano tubes embedded glass fiber reinforced polymer composites at elevated temperature and different corrosive environments" - B.Tech. M.Tech Dual Degree    Supervisor     2016-17 Spring
  • Sohan Kumar Ghosh (712MM1117), "Flexural and creep performance of graphene oxide reinforced glass fiber/epoxy composite at elevated temperatures" - B.Tech. M.Tech Dual Degree    Co-supervisor     2016-17 Spring
  • Abhijeet Anand (713MM1109), "Graphene oxide embedded GFRP composites: A feasibility study for Marine applications" - B.Tech. M.Tech Dual Degree    Co-supervisor     2017-18 Spring
  • Poulami Banerjee (713MM1132), "Development of multi-scale GFRP composites using Nano-silica functionalized Graphene oxide" - B.Tech. M.Tech Dual Degree    Supervisor     2017-18 Spring
  • Soubhik De (714MM1131), "Interphase Modification of CFRP composite by Electrophoretic deposition by carbon based nanofillers and its impact at different service temperatures" - B.Tech. M.Tech Dual Degree    Supervisor     2018-19 Spring
  • N Jyoti Krishna (714MM1100), "Nano Silica hybridized Graphene Oxide: Suitability analysis for reinforcing FRP composites" - B.Tech. M.Tech Dual Degree    Co-supervisor     2019 Summer
  • Bhaskar Sen (715MM1154), "Techniques to enhance the mechanical properties of carbon nanotube embedded glass fibre reinforced epoxy composites" - B.Tech. M.Tech Dual Degree    Supervisor     2019-20 Spring
  • Satyaroop Patnaik (715MM1108), "Interlaminar performance of cryogenically conditioned CFRP composites modified by graphene based nanofillers via electrophoretic deposition" - B.Tech. M.Tech Dual Degree    Co-supervisor     2019-20 Spring
  • Ritupurna Sahoo (716MM1117), "DURABILITY ANALYSIS OF SINGLE LAP JOINT FRP COMPOSITES USING CARBON NANOTUBE REINFORCED EPOXY ADHESIVES AT DIFFERENT TEMPERATURES" - B.Tech. M.Tech Dual Degree    Supervisor     2020-21 Spring

 Awards and Honours

Memberships / Fellowships
  • LMIE(I), LMIIM, LM(IIChE), LM(ISTE), LMCSI,