basua

Academic Identity

Orcid Id

0000-0002-8659-1707

Scopus Id

55697226100

Researcher Id

E-4737-2011

Google Scholar Id

4RIeSaEAAAAJ

Anindya Basu

Professor

Metallurgical and Materials Engineering

(+91) 661 246 2553 , 3553

basua[at]nitrkl.ac.in

Biosketch

48

Publications

6

2

Consultancy Projects

7

Doctoral Students

1

Short-term Course

8

PG Dissertation

Personal Information

Dr. Anindya Basu

Professor

Metallurgical and Materials Engineering

Joined in Sep 2008

Room Number: MS-215

Department of Metallurgical and Materials Engineering, National Institute of Technology Rourkela, Sundargarh, Odisha, India - 769008

Education Qualification

2007 Ph.D.
Surface Engineering - Physical metallurgy - Metallurgical and Materials Engineering
IIT Kharagpur
1997 M.Tech
Metallurgical and Materials Engineering
IIT Kharagpur
1995 B.E
Metallurgy
B E College, Shibpur (IIEST)

Experience

Teaching Experience

Physical Metallurgy, NIT Rourkela, 19 Sep 2008 - Present
Physical Metallurgy, NIFFT, Ranchi, 04 Jun 2007 - 18 Sep 2008

Industrial Experience

Automotive Industry, DAEWOO Motors India limited, 03 Mar 1997 - 31 Dec 2001

Expertise Information

Research Group

Physical Metallurgy, Surface Engineering

Areas of Interest

Physical Metallurgy , Surface Engineering

Projects

Development of electrodeposition and ultrasonic shot peening based hybrid technique for nano ceramic dispersed metalic coating.

SERB

Principal Investigator

36 months

Running

Sponsored

Oxidation and corrosion property improvement by pulsed elctro co-deposited composite coating

CSIR

Principal Investigator

36 months

Running

Sponsored

INVESTIGATION OF SOLIDIFICATION PROCESS AND PREDICTION OF MICROSTRUCTURE DURING SECONDARY COOLING IN CONTINUOUS CASTING OF PLAIN CARBON STEEL TO ESTIMATE THE THE POROSITY FRACTION AND CARBON SEGREGATED BY MULTI SCALE SIMULATION CELLULAR AUTOMATA AND PHASE FIELD MODELING TECHNIQUES

DST

Co-Investigator

24 months

Running

Sponsored

Investigation of solidification process and prediction of microstructure during secondary cooling in continuous casting of plain carbon steel to estimate the the porosity fraction and carbon segregated by multi scale simulation cellular automata and phase field modeling techniques

DST

Co-Investigator

24 months

Completed

Sponsored

Surface property improvement of copper for electrical contacts by Electrophoretic deposition of Ultrafine ceramic particles

CSIR

Principal Investigator

46 months

Completed

Sponsored

Development of nano-dispersed fine grained coating by electodeposition.

DST

Principal Investigator

36 months

Completed

Sponsored

Designing and evaluation of novel hybrid MMC coating system for improved anti-corrosion and mechanical properties

TATA Steel Limited, Jamshedpur

Collaborator Principal Investigator

15 Jun 2020 - 14 Dec 2021

Running

Consultancy

Corrosion of Pipelines of mixed gas service in RSP

RSP, SAIL

Co-consultant

25 Jun 2019 - 31 Mar 2020

Completed

Consultancy

Continuing Education

TEQIP – III SPONSORED WORKSHOP ON ELECTROFORMING AND CORROSION

Metallurgical and Materials Engineering

Coordinator

24 Sep 2018 - 28 Sep 2018

Brochure

Workshop

TEQIP – III Sponsored National WORKSHOP on Outcome based accreditation of technical education

Metallurgical and Materials Engineering

Coordinator

18 Aug 2018 - 19 Aug 2018

Brochure

Workshop

National Conference on Processing and Characterization of Materials (NCPCM 2012)

Metallurgical and Materials Engineering

Coordinator

07 Dec 2012 - 08 Dec 2012

Brochure

Conference

National Conference on Processing and Characterization of Materials (NCPCM 2011)

Metallurgical and Materials Engineering

Coordinator

02 Dec 2011 - 03 Dec 2011

Brochure

Conference

Materials Technology: Advanced Processes and Characterizations

Metallurgical and Materials Engineering

Coordinator

10 Dec 2009 - 11 Dec 2009

Brochure

Short-term Course

Publications

14

Google Scholar h-index

21

Google Scholar i10-index

13

Scopus h-index

Total Publications: 48

J. Majhi, S. Ganguly, A. Basu, and A. K. Mondal, "Improved corrosion response of squeeze-cast AZ91 magnesium alloy with Calcium and Bismuth additions", Journal of Alloys and Compounds, vol.873, pp.159600, Elsevier 2021, 10.1016/j.jallcom.2021.159600 Article

J. Majhi, T. Das, A. Basu, and A., "An analysis of microstructure and impression creep response of squeeze-cast AZ91–xBi–ySr alloys", Materials Science and Technology, vol.36, no.6, pp.731-742, Taylor and Francis, March 2020, 10.1080/02670836.2020.1736763 Article

S. Ganguly, A. K. Mondal, S. Sarkar, A. Basu, S. Kumar, and C. Blawertd, "Improved corrosion response of squeeze-cast SiC nanoparticles reinforced AZ91-2.0Ca-0.3Sb alloy", Corrosion Science, vol.166, no.108444, Elsivier, March 2020, 10.1016/j.corsci.2020.108444 Article

S. Shajahan and A. Basu, "Corrosion, oxidation and wear study of electro-co-deposited ZrO2-TiO2 reinforced Ni-W coatings", Surface and Coatings Technology, vol.393, no.125729, Elsevier 2020, 10.1016/j.surfcoat.2020.125729 Article

M. R. Kolle, S. Shajahan, and A. Basu, "Effect of electrodeposition current and pulse parameter on surface mechanical and electrochemical behavior of Ni–W alloy coatings", Metallurgical and Materials Transactions A, vol.51, pp.3721-3731, Springer 2020, 10.1007/s11661-020-05787-0 Article

Show All Publications(+)

N. Damanapeta, S., S. Pal, G. Padmanabham, and A. Basu, "Influence of joint configuration on mechanical properties of laser weld-brazed aluminum to steel joint", in Processing and Characterization of Materials, Materials Science Forum, vol.978, pp.174-180, Trans Tech Publications 2020, 10.4028/www.scientific.net/MSF.978.174 Inproceedings

S. Shajahan, A. Kumar, M. Chopkar, and A. Basu, "Oxidation study of CoCrCuFeNiSix high entropy alloys", Materials Research Express, vol.7, pp.016532, IOP Science 2020, 10.1088/2053-1591/ab640a Article

B. K. Yadlapalli, H. S. Maharana, and A. Basu, "Structure and properties of pulse electrodeposited Cr-WC coating", Surface Topography: Metrology and Properties, vol.8, no.2, pp.025023, IOP Publishing 2020, 10.1088/2051-672X/ab9450 Article

S. Shajahan and A. Basu, "Effect of current density and deposition time on the corrosion and wear resistance of Ni¬W alloy coatings", International Journal of Materials Research, vol.110, no.12, pp.1160-1167, Hanser publications, December 2019, 10.3139/146.111844 Article

H., A. Basu, and K. Mondal, "Effect of CTAB on the architecture and hydrophobicity of electrodeposited Cu–ZrO2 nano-cone arrays", Surface and Coatings Technology, vol.375, pp.323-333, Elsevier, October 2019, 10.1016/j.surfcoat.2019.07.050 Article

A. Kumar, D. Parganiha, J. Verma, P. Biswas, A. Basu, and M. Chopkar, "On the Synthesis and Characterization of Novel Composite Structured High Entropy Alloys", Philosophical Magazine Letters, vol.99, no.8, pp.302-308, Taylor and Francis, October 2019, 10.1080/09500839.2019.1671995 Article

N. Damanapeta, S., G. Padmanabham, and A. Basu, "Influence of wire feed rate on mechanical and microstructure characteristics of aluminum to galvanized steel laser brazed joint", Journal of Manufacturing Processes, vol.39, pp.271-281, Elsevier, March 2019, 10.1016/j.jmapro.2019.02.017 Article

H. S. Maharana, B. Bishoyi, and A. Basu, "Current density dependent microstructure and texture evolution and related effects on properties of electrodeposited Ni-Al coating", Journal of Alloys and Compounds, vol.787, pp.483-984, Elsevier, February 2019, 10.1016/j.jallcom.2019.02.096 Article

N. Damanapeta, K. Dutta, S., G. Padmanabham, and A. Basu, "Mechanical and microstructural characterization of laser weld-brazed AA6082-galvanized steel joint", Journal of Materials Processing Technology, vol.263, pp.21-32, Elsevier, January 2019, 10.1016/j.jmatprotec.2018.08.002 Article

N. Damanapeta, P., S., G. Padmanabham, K. Mondal, and A. Basu, "Corrosion behavior of laser-brazed surface made by joining of AA6082 and galvanized steel", Journal of Materials Engineering and Performance, pp.1-13, Springer 2019, 10.1007/s11665-019-03962-y Article

H., S. Jena, A. Basu, and K. Mondal, "High temperature oxidation resistance of electrodeposited reduced graphene oxide (RGO) reinforced copper coating", Surface & Coatings Technology, vol.345, pp.140-151, Elsevier, July 2018, 10.1016/j.surfcoat.2018.04.025 Article

A. Kumar, A. K. Swarnakar, A. Basu, and M. Chopkar, "Effects of processing route on phase evolution and mechanical properties of CoCrCuFeNiSix high entropy alloys", Journal of Alloys and Compounds, vol.748, pp.889-897, Elsevier, June 2018, 10.1016/j.jallcom.2018.03.242 Article

H., S. Bhatnagar, and A. Basu, "Structure property correlation of electro-codeposited Cu-Al-V2O5 composite coating obtained from Al-V2O5 dispersed electrolyte", Surface and Coating Technologies, vol.339, pp.111-123, Elsevier, April 2018, 10.1016/j.surfcoat.2018.02.012 Article

H. S. Maharana, B. Bishoyi, S. Panda, and A. Basu, "Electron backscattered diffraction study of pulse electrodeposited Cu-Y2O3 composite coating", Journal of Materials Engineering and Performance, vol.27, no.7, pp.3488-3497, Springer 2018, 10.1007/s11665-018-3469-5 Article

H. S. Maharana, A. Basu, and K. Mondal, "Structural and tribological correlation of electrodeposited solid lubricating Ni-WSe2 composite coating", Surface and Coating Technologies, vol.349, pp.328-339, Elsevier 2018, 10.1016/j.surfcoat.2018.06.005 Article

M. Nuthalapati, S. K. Karak, D. Chakravarty, and A. Basu, "Comparative study on microscopic, physical and mechanical properties of conventional and spark plasma sintered nano-TiO2 dispersed zirconium base alloys", Metallography, Microstructure, and Analysis, vol.6, no.6, pp.527–540, Springer, December 2017, 10.1007/s13632-017-0393-2 Article

N. Damanapeta, S. Pal, S., G. Padmanabham, and A. Basu, "AA6082 to DX56-steel laser vrazing: process parameter–intermetallic formation correlation", Journal of Materials Engineering and Performance, vol.26, no.9, pp.4274-4281, Springer, September 2017, 10.1007/s11665-017-2902-5 Article

H. S. Maharana, S. Panda, and A. Basu, "Effect of texture and microstructure on properties of electrodeposited Cu-SiO2 and Cu-Y2O3 coatings", Surface and Coating Technologies, vol.315, pp.558-566, Elsevier, April 2017, 10.1016/j.surfcoat.2017.02.035 Article

H. Maharana and A. Basu, "Evolution and structure-property correlation of CTAB assisted high hardness electrodeposited Cu-ZrO2 nano-cone arrays", Surface and Coatings Technology, vol.310, pp.148-156, Elsevier, January 2017, 10.1016/j.surfcoat.2016.12.064 Article

H. S. Maharana, Rai. P. K, and A. Basu, "Surface-mechanical and electrical properties of pulse electrodeposited Cu–graphene oxide composite coating for electrical contacts", Journal of Materials Science, vol.52, no.2, pp.1089-1105, Springer, January 2017, 10.1007/s10853-016-0405-7 Article

M. Nuthalapati, S. K. Karak, J. D. Majumdar, D. Chakravarty, and A. Basu, "Corrosion behavior and high temperature oxidation kinetics of nano-TiO2/Y2O3 dispersed zirconium alloys", Journal of Alloys and Compounds, vol.689, pp.908-917, Elsevier, December 2016, 10.1016/j.jallcom.2016.08.049 Article

S. Mishra, M. Chinara, M. Nuthalapati, and A. Basu, "Improvement of thermal properties of water and ethylene glycol by metallic and ceramic dispersion", in NCPCM 2015 Proceedings, vol.115, no.1, pp.1-7, IOP Publishing, iop conference : materials science and engineering, 5th National Conference on Processing and Characterization of Materials 12–13 December 2015, Rourkela, India, December 2016, 10.1088/1757-899X/115/1/012033 Inproceedings

H. Maharana and A. Basu, "Surface-mechanical and oxidation behavior of electro-co-deposited Cu-Y2O3 composite coating", Surface and Coatings Technology, vol.304, pp.348-358, Elsevier, October 2016, 10.1016/j.surfcoat.2016.07.015 Article

L. S, H. Maharana, and A. Basu, "Synthesis and characterization of Cr-ZrO2 composite coating formed by DC and pulse electrodeposition", Materials and Manufacturing Processes, vol.31, no.11, pp.1447-1453, Taylor and Francis, February 2016, 10.1080/10426914.2016.1151039 Article

M. Nuthalapati, S. K. Karak, D. Chakravarty, and A. Basu, "Development of nano-Y2O3 dispersed Zr alloys by mechanical alloying and spark plasma sintering", Materials Science and Engineering A, vol.650, pp.145-153, Elsevier, January 2016, 10.1016/j.msea.2015.10.017 Article

H. Maharana, S. Lakra, S. Pal, and A. Basu, "Electrophoretic deposition of Cu-SiO2 coatings by DC and pulsed DC for enhanced surface-mechanical properties", Journal of Materials Engineering and Performance, vol.25, no.1, pp.327-337, Springer, January 2016, 10.1007/s11665-015-1834-1 Article

H. Maharana, A. Ashok, S. Pal, and A. Basu, "Surface-mechanical properties of electrodeposited Cu-Al2O3 composite coating and effects of processing parameters", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol.47, no.1, pp.388-399, Springer, January 2016, 10.1007/s11661-015-3238-0 Article

N. Damanapeta, R. N. Bathe, J. D. Majumdar, G. Padmanabham, and A. Basu, "Microstructure and mechanical properties of double pass laser welds on 6061-T6 aluminium alloy", Lasers in Engineering, vol.33, no.1-3, pp.53-66, Old City Publishing, December 2016 Article

P. P. Seth, A. Das, H. N. Bar, S. Sivaprasad, A. Basu, and K. Dutta, "Evolution of dislocation density during tensile deformation of BH220 steel at different pre-strain conditions", Journal of Materials Engineering and Performance, vol.24, no.7, pp.2779-2783, Springer, July 2015, 10.1007/s11665-015-1554-6 Article

A. Ashok, H. Maharana, and A. Basu, "Effect of electro-co-deposition parameters on surface mechanical properties of Cu-TiO2 composite coating", Bulletin of Materials Science, vol.38, no.2, pp.335-342, Springer, April 2015, 10.1007/s12034-015-0884-1 Article

M. Nuthalapati, S. K. Karak, and A. Basu, "Synthesis and characterization of Nano-Y2O3 dispersed Zr-based alloys by mechanical alloying and conventional sintering", in Synthesis and Characterization of Nano-Y2O3 Dispersed Zr-based Alloys by Mechanical Alloying and Conventional Sintering, vol.2, no.4-5, pp.1109-1117, Elsevier, icmpc, NIT, Rourkela, December 2015, 10.1016/j.matpr.2015.07.016 Inproceedings

M. Nuthalapati, S. K. Karak, J. D. Majumdar, and A. Basu, "Phase evolution and mechanical properties of nano-TiO2 dispersed Zr-based alloys by mechanical alloying and conventional sintering", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol.45, no.9, pp.3748-3754, Springer, August 2014, 10.1007/s11661-014-2351-9 Article

N. Damanapeta, R. N. Bathe, G. Padmanabham, and A. Basu, "Influence of temperature profile during laser welding of aluminum alloy 6061 T6 on microstructure and mechanical properties", Materials and Manufacturing Processes, vol.29, no.8, pp.948-953, Taylor and Francis, March 2014, 10.1080/10426914.2013.872258 Article

G. Parida, D. Chaira, and A. Basu, "Ni-ZrO2 composite coating by electro-co-deposition", Transactions of the Indian Institute of Metals, vol.66, no.1, pp.5-11, Springer, November 2013, 10.1007/s12666-012-0161-6 Article

A. Basu, J. D. Majumdar, and I. Manna, "Structure and properties of Cr xN coating", Surface Engineering, vol.28, no.3, pp.199-204, Taylor & Francis, November 2013, 10.1179/1743294411Y.0000000061 Article

D. Roy, O. A. Ojo, H. Raghuvanshi, and A. Basu, "Fretting wear behavior of nano-intermetallic precipitates Al65Cu20Ti15 amorphous matrix composite prepared by pulse plasma sintering of the ball milled powder", Journal of Material Sciences & Engineering, vol.1, no.1, OMICS International, April 2012, 10.4172/2169-0022.1000107 Article

G. Parida, D. Chaira, M. Chopkar, and A. Basu, "Synthesis and characterization of Ni-TiO2 composite coatings by electro-co-deposition", Surface and Coatings Technology, vol.205, no.21-22, pp.4871-4879, Elsevier, August 2011, 10.1016/j.surfcoat.2011.04.102 Article

A. Basu, J. D. Majumdar, J. Alphonsa, S. Mukherjee, and I. Manna, "Corrosion resistance improvement of high carbon low alloy steel by plasma nitriding", Materials Letters, vol.62, no.17-18, pp.3117-3120, Elsevier 2008, 10.1016/j.matlet.2008.02.001 Article

A. Basu, A. N. Samant, S. P. Harimkar, J. D. Majumdar, I. Manna, and N. B. Dahotre, "Laser surface coating of Fe-Cr-Mo-Y-B-C bulk metallic glass composition on AISI 4140 steel", Surface and Coatings Technology, vol.202, no.12, pp.2623-2631, Elsevier 2008, 10.1016/j.surfcoat.2007.09.028 Article

A. Basu, J. D. Majumdar, J. Alphonsa, S. Mukherjee, and I. Manna, "Plasma nitriding of a low alloy - high carbon steel", Transactions of the Indian Institute of Metals, vol.60, no.5, pp.471-479, Springer, June 2007 Article

A. Basu, J. Chakraborty, S. M. Shariff, G. Padmanabham, S. Joshi, G. Sundarrajan, J. D. Majumdar, and I. Manna, "Laser surface hardening of austempered (bainitic) ball bearing steel", Scripta Materialia, vol.56, no.10, pp.887-890, Elsevier 2007, 10.1016/j.scriptamat.2007.01.029 Article

A. Basu, J. D. Majumdar, S. G. Chowdhury, P. K. Ajikumar, P. Shankar, A. K. Tyagi, B. Raj, and I. Manna, "Microstructural and texture studies of gas nitrided Cr-coated low alloy high carbon steel", Surface and Coatings Technology, vol.201, no.16-17, pp.6985-6992, Elsevier 2007, 10.1016/j.surfcoat.2007.01.004 Article

Hide Publications (-)

Courses Taught

MM203 : Priciples of Physical Metallurgy {Theory}
MM2101 : Principle of Physical Metallurgy {Theory}
MM2108 : Structure and Properties of Materials {Theory}
MM211 : Science and Technology of Materials {Theory}
MM301 : Heat Treatment of Metallic Materials {Theory}
MM3109 : Fundamentals of Physical Metallurgy {Theory}
MM448 : Advanced Engineering Materials {Theory}
MM468 : Joining of Metals {Theory}
MM6112 : Phase Transformation {Theory}
MM612 : Phase Transformation {Theory}
MM636 : Advanced Processing of Materials {Theory}
MM6529 : Surface Engineering {Theory}
MM471 : Composite Materials Laboratory {Practical}
MM471 : Polymer and Composite Materials Laboratory {Practical}
MM674 : Material Science Laboratory {Practical}
MM674 : Materials Science Laboratory {Practical}

Research Scholars

Ph.D. Students

Surface Engineering

Adarsh Kushwaha

OnGoing

Supervisor

Electrometallurgy And Corrosion

Pundrikaksha Upadhyay

OnGoing

Co-Supervisor

Surface Engineering By Composite Coating

Shaik Shajahan

OnGoing

Supervisor

Mechanical Behaviour Of Mg Alloys And Composites

Jichil Majhi

OnGoing

Co-Supervisor

Laser Weld-Brazing Of Aluminum Alloy (Aa6082/Aa5083) And Galvanized Interstitial Free Steel With An Emphasis On Fatigue And Corrosion Study

Damanapeta Narsimhachary

Graduated

Supervisor

Surface Modification Of Copper By Electro-Codeposition

Himanshu Sekhar Maharana

Graduated

Supervisor

Development Of Nano-Tio₂/Y₂o₃ Dispersed Zrirconium Alloys By Mechanical Alloying Followed By Conventional And Spark Plasma Sintering

Mohan Nuthalapati

Graduated

Supervisor

Executive Ph.D. Students

Structure-Property Correlation Of Various Important Engineering Metals And Alloys

Chinnam Sivateja

OnGoing

Co-Supervisor

M.Tech by Research Students

Laser Welding Of Al Alloys

Narsimha Chary Damanapeta

Graduated

Supervisor

Dissertations

PG Dissertation

Abhijit Kumar Das (213MM1464), "Dissimilar Joining of metals by powder metallurgy route" - M.Tech. Supervisor 2014-15 Spring
Tanvi Mishra (214MM2502), "Joining of Brass/Copper/Nickel with Stainless Steel by Powder Metallurgy Process" - M.Tech. Supervisor 2015-16 Spring
Shrey Bhatnagar (215MM1238), "Structure property correlation of Cu-Al-V2O5 composite coating prepared by electro-codeposition from Al-V2O5 dispersed bath" - M.Tech. Supervisor 2016-17 Spring
Bharath Kumar Yadlapalli (216MM1440), "Synthesis and Characterization of Cr-WC Composite Coatings by Electrocodeposition" - M.Tech. Supervisor 2017-18 Spring
Vivek Prajapat (216MM2451), "Synthesis and Characterization of Ni-WC-Zr Nanocomposite Coating by Electrodeposition" - M.Tech. Supervisor 2017-18 Spring
Maheshkumar Rajshekhar Kolle (217MM1359), "Effect of current density and pulse parameter on Ni-W coating." - M.Tech. Supervisor 2018-19 Spring
G Safiur Rahiman (218MM1250), "Synthesis and Characterization of Electrodeposited Zn and Zn-Al Coatings" - M.Tech. Supervisor 2019-20 Spring
Himanshu Basantlal Patel (219MM1577), "Effect of deposition current density on the corrosion properties of electro-codeposited Zn-PTFE coating" - M.Tech. Supervisor 2020-21 Spring

UG Dissertation

Aditya Narayan Shiv Shankar Swain (111MM0407), "SYNTHESIS AND CHARACTERIZATION OF CERAMIC NANOFLUIDS" - B.Tech. Supervisor 2014-15 Spring
Anubhav Patra (111MM0398), "SYNTHESIS AND CHARACTERIZATION OF CERAMIC NANOFLUIDS" - B.Tech. Supervisor 2014-15 Spring
Sovan Mishra (111MM0369), "Synthesis and characterization of metallic nanofluids" - B.Tech. Supervisor 2014-15 Spring
Turyansu Subhadarshy (111MM0381), "Synthesis and characterization of metallic nanofluids" - B.Tech. Supervisor 2014-15 Spring
Manaswini Chinara (112MM0398), "IMPROVEMENT OF THERMAL PROPERTIES OF WATER AND ETHYLENE GLYCOL BY METALLIC AND CERAMIC DISPERSION AND SIMULATED STUDY OF THEIR HEAT TRANSFER USING DISCRETE PHASE MODEL" - B.Tech. Supervisor 2015-16 Spring
Sripooja Mishra (112MM0409), "IMPROVEMENT OF THERMAL PROPERTIES OF WATER AND ETHYLENE GLYCOL BY METALLIC AND CERAMIC DISPERSION AND SIMULATED STUDY OF THEIR HEAT TRANSFER USING DISCRETE PHASE MODEL" - B.Tech. Supervisor 2015-16 Spring
Sriram Madhav Vivekvardhan Pilla (112MM0604), "Effect of current density and pulse frequency during electrodeposition of Nickel on Copper" - B.Tech. Supervisor 2016-17 Spring
Suman Swain (113MM0469), "Effect of current density and pulse frequency during electrodeposition of Nickel on Copper" - B.Tech. Supervisor 2016-17 Spring
Abhijnan Akash Saikia (113MM0467), "Effect of Current Density and Duty Cycle during Electrodeposition of Nickel on Copper" - B.Tech. Supervisor 2017 Summer
Jatin Jain (114MM0504), "Synthesis and Characterisation of ultra-fine Hydroxyapatite (HAP) powder coating on stainless steel substrate by Electrophoretic deposition" - B.Tech. Supervisor 2017-18 Spring
Laxmidhar Majhi (114MM0507), "Synthesis and Characterisation of ultra-fine Hydroxyapatite (HAP) powder coating on stainless steel substrate by Electrophoretic deposition" - B.Tech. Supervisor 2017-18 Spring
Meena Kumari Bansing (115MM0658), "Synthesis and characterization of Ni-W alloy coatings by DC and Pulse electro-deposition with varying duty cycles." - B.Tech. Supervisor 2018-19 Spring
Rahul Gangwar (115MM0489), "Synthesis and characterization of Ni-W alloy coatings by DC and Pulse electro-deposition with varying duty cycles." - B.Tech. Supervisor 2018-19 Spring
Bandaru Krishna Murthy (116MM0533), "EXPERIMENTAL PHASE ESTIMATION OF STEEL BY HEAT TREATING IN INTER-CRITICAL REGION" - B.Tech. Supervisor 2019-20 Spring
Bimal Kumar Behera (116MM0516), "EXPERIMENTAL PHASE ESTIMATION OF STEEL BY HEAT TREATING IN INTER-CRITICAL REGION" - B.Tech. Supervisor 2019-20 Spring
Shwetanjali Markam (117MM0623), "Electrogalvanizing with PTFE dispersion" - B.Tech. Supervisor 2020-21 Spring
Yash Kumar (117MM0029), "Electrogalvanizing with PTFE dispersion" - B.Tech. Supervisor 2020-21 Spring
Chinmaya Prasad Dakua (710MM1170), "Diffusion study of electrodeposited copper-nickel multilayer" - B.Tech. M.Tech Dual Degree Supervisor 2014-15 Spring
Sourav Jena (712MM1097), "Synthesis and characterization of Cu-Al-V2O5 composite coating prepared by electrocodeposition from CuSO4-Al2(SO4)3-V2O5 bath" - B.Tech. M.Tech Dual Degree Supervisor 2016-17 Spring

Awards and Honours

Memberships / Fellowships

FIE(I), 2018
LMMRSI, 2016
LMISCA, 2011
LMIIM, 2010

Academic Identity

Orcid Id

Scopus Id

Researcher Id

Google Scholar Id

Anindya Basu

48

Publications

6

Sponsored Projects

2

Consultancy Projects

7

Doctoral Students

1

Short-term Course

8

PG Dissertation

Personal Information

Dr. Anindya Basu

Education Qualification

Experience

Teaching Experience

Industrial Experience

Expertise Information

Research Group

Areas of Interest

Projects

Continuing Education

Publications

14

Google Scholar h-index

21

Google Scholar i10-index

13

Scopus h-index

Total Publications: 48

Courses Taught

Research Scholars

Ph.D. Students

Executive Ph.D. Students

M.Tech by Research Students

Dissertations

PG Dissertation

UG Dissertation

Awards and Honours

Memberships / Fellowships