Course Details
Subject {L-T-P / C} : MM4462 : Design and Calculation Laboratory { 0-0-3 / 2}
Subject Nature : Practical
Coordinator : Arnab Sarkar
Syllabus
| Module 1 : |
Introduction and overview of the Ansys workbench. |
| Module 2 : |
To model and analyze stresses in a cantiliever beam. |
| Module 3 : |
To observe the buckling behaviour in a hollow pipe. |
| Module 4 : |
To model a plate with a hole and analyze stress and strain under loads. |
| Module 5 : |
To model the three-point bending test and analyze the stress. |
| Module 6 : |
To model a double L-shaped structure and analyze the stress and strain distribution. |
| Module 7 : |
To determine the temperature differences at the interface of the two blocks (Cu + Bakelite). |
| Module 8 : |
To analyze the stresses in a bracket. |
| Module 9 : |
Generation of the stress-strain curve of the tensile test specimen using ANSYS. |
Course Objective
| 1 . |
Familarization of the ANSYS interface to determine various mechanical parameters in an engineering component. |
| 2 . |
ANSYS-based analysis will allow the student to optimize the design of the component and ensures the safety. |
| 3 . |
Apart from the stress analysis, thermal analysis, CFD, life cycle assessment of a component can be learnt from the ANSYS-based simulation. |
Course Outcome
| 1 . |
Familarization of the ANSYS workbench. |
| 2 . |
ANSYS-based simulation is utilized to analyze the stress in a cantiliever beam, plate with a hole, and different morphologies of the engineering component. |
| 3 . |
ANSYS-based simulation is utilized to understand the buckling behavior. |
| 4 . |
ANSYS-based simulation is utilized to learn the three point beding test. |
| 5 . |
ANSYS-based simulation is utilized to conduct the thermal analysis. |
| 6 . |
ANSYS-based simulation is utilized to generate the stress-strain curve and predict the tensile parameters of an engineering component. |
Essential Reading
| 1 . |
E Madenci and I Guven, The Finite Element Method and Applications in Engineering Using ANSYSThe Finite Element Method and Applications in Engineering Using ANSYS, Springer |
Supplementary Reading
| 1 . |
Dr. Abhinav, Dr. Shivakumar S and Dr. Niranjana S.J., Structural Analysis using Ansys Workbench –How Engineers Do?, Shashwat Publication |
Journal and Conferences
| 1 . |