National Institute of Technology Rourkela

राष्ट्रीय प्रौद्योगिकी संस्थान राउरकेला

ଜାତୀୟ ପ୍ରଯୁକ୍ତି ପ୍ରତିଷ୍ଠାନ ରାଉରକେଲା

An Institute of National Importance

Faculty Profile

EXPERTISE INFORMATION

Research Group
  • Physical Metallurgy
Areas of Interest
  • Physical Metallurgy
  • Surface Engineering

Anindya Basu Professor

Metallurgical and Materials Engineering

basua@nitrkl.ac.in

0661 - 246 2553

67

PUBLICATIONS

6

SPONSORED PROJECTS

2

CONSULTANCY PROJECTS

7

DOCTORAL STUDENTS

6

CONTINUING EDUCATION

PERSONAL INFORMATION

Anindya Basu

Professor

Metallurgical and Materials Engineering

Room Number: MS-215

Department of Metallurgical and Materials Engineering, National Institute of Technology Rourkela, Sundargarh, Odisha, India - 769008

2007

Ph.D.
Surface Engineering - Physical metallurgy - Metallurgical and Materials Engineering
IIT Kharagpur

1997

M.Tech
Metallurgical and Materials Engineering
IIT Kharagpur

1995

B.E
Metallurgy
B E College, Shibpur (IIEST)

Teaching Experience
  • Physical Metallurgy,  NIT Rourkela,   19 Sep 2008 - Present
  • Physical Metallurgy,  NIFFT, Ranchi,   04 Jun 2007 - 18 Sep 2008
Industrial Experience
  • Automotive Industry,  DAEWOO Motors India limited,   03 Mar 1997 - 31 Dec 2001

Development of electrodeposition and ultrasonic shot peening based hybrid technique for nano ceramic dispersed metalic coating. SERB
  • Principal Investigator
  • 36
  • Completed   Sponsored
Oxidation and corrosion property improvement by pulsed elctro co-deposited composite coating CSIR
  • Principal Investigator
  • 36
  • Completed   Sponsored
INVESTIGATION OF SOLIDIFICATION PROCESS AND PREDICTION OF MICROSTRUCTURE DURING SECONDARY COOLING IN CONTINUOUS CASTING OF PLAIN CARBON STEEL TO ESTIMATE THE THE POROSITY FRACTION AND CARBON SEGREGATED BY MULTI SCALE SIMULATION CELLULAR AUTOMATA AND PHASE FIELD MODELING TECHNIQUES DST
  • Co-Investigator
  • 24
  • Completed   Sponsored
Investigation of solidification process and prediction of microstructure during secondary cooling in continuous casting of plain carbon steel to estimate the the porosity fraction and carbon segregated by multi scale simulation cellular automata and phase field modeling techniques DST
  • Co-Investigator
  • 24
  • Completed   Sponsored
Surface property improvement of copper for electrical contacts by Electrophoretic deposition of Ultrafine ceramic particles CSIR
  • Principal Investigator
  • 46
  • Completed   Sponsored
Development of nano-dispersed fine grained coating by electodeposition. DST
  • Principal Investigator
  • 36
  • Completed   Sponsored
Designing and evaluation of novel hybrid MMC coating system for improved anti-corrosion and mechanical properties TATA Steel Limited, Jamshedpur
  • Collaborator Principal Investigator
  • 15 Jun 2020 - 25 May 2021
  • Completed   Consultancy
Corrosion of Pipelines of mixed gas service in RSP RSP, SAIL
  • Co-consultant
  • 25 Jun 2019 - 31 Mar 2020
  • Completed   Consultancy

Total Publications: 67

N. Damanapeta, S., G. Padmanabham, and A. Basu,"Influence of wire feed rate on mechanical and microstructure characteristics of aluminum to galvanized steel laser brazed joint", Journal of Manufacturing Processes, vol.39, pp.271-281, Elsevier, March 2019, 10.1016/j.jmapro.2019.02.017       Article

H. S. Maharana, Rai. P. K, and A. Basu,"Surface-mechanical and electrical properties of pulse electrodeposited Cu–graphene oxide composite coating for electrical contacts", Journal of Materials Science, vol.52, no.2, pp.1089-1105, Springer, January 2017, 10.1007/s10853-016-0405-7       Article

H. S. Maharana, B. Bishoyi, S. Panda, and A. Basu,"Electron backscattered diffraction study of pulse electrodeposited Cu-Y2O3 composite coating", Journal of Materials Engineering and Performance, vol.27, no.7, pp.3488-3497, Springer 2018, 10.1007/s11665-018-3469-5       Article

G. Parida, D. Chaira, and A. Basu,"Ni-ZrO2 composite coating by electro-co-deposition", Transactions of the Indian Institute of Metals, vol.66, no.1, pp.5-11, Springer, November 2013, 10.1007/s12666-012-0161-6       Article

A. Basu, J. Chakraborty, S. M. Shariff, G. Padmanabham, S. Joshi, G. Sundarrajan, J. D. Majumdar, and I. Manna,"Laser surface hardening of austempered (bainitic) ball bearing steel", Scripta Materialia, vol.56, no.10, pp.887-890, Elsevier 2007, 10.1016/j.scriptamat.2007.01.029       Article

SERB sponsored workshop on Mechanically Assisted Surface Treatment Metallurgical and Materials Engineering (Workshop)
TEQIP – III SPONSORED WORKSHOP ON ELECTROFORMING AND CORROSION Metallurgical and Materials Engineering (Workshop)
TEQIP – III Sponsored National WORKSHOP on Outcome based accreditation of technical education Metallurgical and Materials Engineering (Workshop)
National Conference on Processing and Characterization of Materials (NCPCM 2012) Metallurgical and Materials Engineering (Conference)
National Conference on Processing and Characterization of Materials (NCPCM 2011) Metallurgical and Materials Engineering (Conference)
Materials Technology: Advanced Processes and Characterizations Metallurgical and Materials Engineering (Short-term Course)

  • MM203 : Priciples of Physical Metallurgy {Theory}
  • MM2101 : Principle of Physical Metallurgy {Theory}
  • MM2108 : Structure and Properties of Materials {Theory}
  • MM211 : Science and Technology of Materials {Theory}
  • MM301 : Heat Treatment of Metallic Materials {Theory}
  • MM3109 : Fundamentals of Physical Metallurgy {Theory}
  • MM448 : Advanced Engineering Materials {Theory}
  • MM468 : Joining of Metals {Theory}
  • MM5523 : Surface Engineering {Theory}
  • MM6112 : Phase Transformation {Theory}
  • MM612 : Phase Transformation {Theory}
  • MM636 : Advanced Processing of Materials {Theory}
  • MM6529 : Surface Engineering {Theory}
  • MM3523 : Characterization of Materials Laboratory {Practical}
  • MM471 : Composite Materials Laboratory {Practical}
  • MM471 : Polymer and Composite Materials Laboratory {Practical}
  • MM674 : Material Science Laboratory {Practical}
  • MM674 : Materials Science Laboratory {Practical}

Ph.D. Students [7]
Development of Nano-TiO2/Y2O3 dispersed Zrirconium alloys by Mechanical alloying followed by Conventional and Spark Plasma Sintering
Mohan Nuthalapati
Enrolled: Jan 2012
Graduated :  2016
Supervisor
Surface Modification of Copper by Electro-codeposition
Himanshu Sekhar Maharana
Enrolled: Dec 2011
Graduated :  2016
Supervisor
Laser Weld-brazing of Aluminum Alloy (AA6082/AA5083) and Galvanized Interstitial Free Steel with an Emphasis on Fatigue and Corrosion Study
Damanapeta Narsimhachary
Enrolled: Jul 2014
Graduated :  2019
Supervisor
Microstructural Correlation of Creep, Tensile and Corrosion Behaviour of AZ91 Magnesium Alloy with Bi, Ca and Sr Additions
Jichil Majhi
Enrolled: Aug 2015
Graduated :  2021
Co-Supervisor
Electrometallurgy and Corrosion
Pundrikaksha Upadhyay
Enrolled: Jul 2018
Continuing
Co-Supervisor
SURFACE ENGINEERING
Adarsh Kushwaha
Enrolled: Jul 2019
Continuing
Supervisor
SURFACE ENGINEERING
Sivasubramanian J
Enrolled: Aug 2021
Continuing
Supervisor
M.Tech by Research Students [1]
LASER WELDING OF AL ALLOYS
Narsimha Chary Damanapeta
Graduated :  2013
Supervisor

Memberships / Fellowships
  • FIE(I),   2018
  • LMMRSI,   2016
  • LMISCA,   2011
  • LMIIM,   2010